Effect of different overlap cladding transition layer – Austenitic stainless steel coating and defect degree on corrosion resistance
Source abstract
Abstract
The effects of overlap rate and defects on the corrosion resistance of laser fusion clad austenitic stainless steel coatings were studied. In this paper, the Ni transition layer and Fe-based coating were sequentially prepared on grey cast iron, and the corrosion morphology and corrosion mechanism of the coating were comprehensively analyzed through physical phase, microstructure and electrochemical tests. The coating phase was mainly γ-Fe, which formed strong selective orientation and texture strength at the (100) crystal plane; overlap ratio and defects affected the recrystallization changes, and the stresses near the defects were high. Increased overlap rate (Fe-based alloy 50 % → 66.7 %) could result in microstructure refinement, reduced corrosion rate v (A8 6.22×10 −4 g/m 2·h→A9 3.12×10 −5 g/m 2 ·h), and improved corrosion resistance. Corrosion cracking extended the crack and embrittled the alloy at the tips of the cracks, so that its (|Z| max 0.67 ∼ 1.31×10 4 Ω cm 2) influence on the corrosion resistance was much higher than that of the pore (|Z| max 5.85 ∼ 10.2×10 4 Ω cm 2). The best corrosion resistance of the process was achieved with an overlap ratio of 66.7 % for both the Ni transition layer and the Fe-based coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Study on ductile iron surface laser cladding austenitic stainless steel coating heat treatment to enhance wear resistance10.1016/j.triboint.2023.109202 ↗
2. Effect of the 75ferrosilicon on the laser cladding on gray cast iron10.1016/j.optlastec.2018.12.013 ↗
3. A comparative study on wear behaviour of Cr/Mo surface modified grey cast iron10.1016/j.optlastec.2018.02.027 ↗
4. Multi-layer laser cladding analysis and high-temperature oxidative wear behavior of cast iron with a low expansion coefficient10.1016/j.surfcoat.2023.130079 ↗
5. Effect of high-temperature heat treatment on electrochemical corrosion behavior of laser cladding Fe-based alloy coating in H2SO4 solution10.1016/j.matlet.2023.134560 ↗
6. Effect of chromic acid anodization on the corrosion resistance of Fe-based alloy coatings by high-speed laser cladding10.1016/j.matlet.2023.134887 ↗
7. Deep pit repairing of nodular cast iron by laser cladding NiCu/Fe-36Ni low-expansion composite alloy10.1016/j.matchar.2019.03.021 ↗
8. Research status of the transition layer on laser cladding10.1051/metal/2023047 ↗
9. Recent trends in laser cladding and surface alloying10.1016/j.optlastec.2020.106619 ↗
10. Recent research and development status of laser cladding: A review Optics10.1016/j.optlastec.2021.106915 ↗
11. Study of the microstructure and corrosion properties of a Ni-based alloy coating deposited onto the surface of ductile cast iron using high-speed laser cladding
12. Effect of the particle size of cladding materials on the morphology and corrosion resistance of fe-based laser cladding layers10.20964/2020.02.17 ↗
13. Effect of laser path overlap on surface roughness and hardness of layer in laser cladding10.1179/1362171815Y.0000000044 ↗
14. Optimization of the overlap rate of multi-track laser cladding based on the flat-top overlapping model transactions of the Indian
15. Component mixing in laser cladding processes: from single-track to single-layer multi-track and multi-layer multi-track10.1016/j.surfcoat.2023.129233 ↗
16. Microstructure and corrosion behavior of different clad zones in multi-track Ni-based laser-clad coating10.1016/j.surfcoat.2020.126310 ↗
17. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding10.1016/j.apsusc.2020.146085 ↗
18. Influence of the overlapped area on the corrosion behaviour of laser treated aluminium alloys10.1016/S0921-5093(97)00695-3 ↗
19. Influences of the cladding method and overlapping rate on the multi-channel overlapping of composite coatings10.1016/j.ijleo.2023.170896 ↗
20. Laser fabricated nickel-based coating with different overlap modes10.1080/10426914.2021.1926490 ↗
21. Mitigation of pores generation at overlapping zone during laser cladding10.1016/j.jmatprotec.2014.09.025 ↗
22. Dynamic evolution behavior of cracks for single-track and multi-track clads in laser cladding The10.1007/s00170-023-12766-3 ↗
23. Correlation research on multi-field coupling of multi-track overlapping laser cladding process for nodular cast iron10.1007/s00170-022-09842-5 ↗
24. Influence of corrosion crack patterns on the rate of crack widening of RC beams10.1016/j.conbuildmat.2010.11.097 ↗
25. D. Kuang, Y.F. Cheng, AC Corrosion at Coating Defect on Pipelines Corrosion, 71 (2015) 267-276.10.5006/1377 ↗
26. Corrosion pitting and environmentally assisted small crack growth Proceedings of the Royal Society A: mathematical
27. Corrosion mechanism of graphene coating with different defect levels10.1016/j.jallcom.2018.10.260 ↗
28. Microstructure and wear resistance of Fe60 laser cladding coating assisted by steady magnetic field–mechanical vibration coupling field
29. Crack formation mechanisms and control methods of laser cladding coatings: a review
30. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels10.1016/j.surfcoat.2018.02.052 ↗
31. In situ observation of crack growth in a WC-Co hardmetal and characterisation of crack growth morphologies by EBSD10.1016/j.ijrmhm.2012.08.006 ↗
32. Microstructural evolution and characteristics of bonding zone in multilayer laser cladding of Fe-based coating10.1016/j.jmatprotec.2018.08.005 ↗
33. M. Masafi, H. Palkowski, H. Mozaffari-Jovein, Microstructural Properties of Particle-Reinforced Multilayer Systems of 316L and 430L Alloys on Gray Cast Iron Coatings, 13 (2023).10.3390/coatings13081450 ↗
34. J. Ding, Y. Liu, L. Zhu, L. Zhou, Y. Li, Microstructure and properties of a titanium carbide reinforced coating on grey iron applied with laser cladding materiali in tehnologije, 53 (2019) 377-381.10.17222/mit.2018.206 ↗
35. Effects of Cu and WS2 addition on microstructural evolution and tribological properties of self-lubricating anti-wear coatings prepared by laser cladding
36. Microstructure and tribological properties of Stellite 12 coating by laser cladding on 304 stainless steel surface10.1007/s12206-023-0711-3 ↗
37. Gold-decorated flow-through electrodes: effect of electrochemical time constant on electrodeposition of Au particles on reticulated vitreous carbon10.1149/1.3272881 ↗
38. Electrochemical micromachining based on time constant control10.1016/j.ymssp.2020.106920 ↗
39. Achieving ultra-high corrosion-resistant Mg-Zn-Sc alloys by forming Sc-assisted protective corrosion product film10.1016/j.jmst.2023.08.068 ↗
40. Evaluation of the properties of anodized aluminum 6061 subjected to thermal cycling treatment using electrochemical impedance spectroscopy (EIS)10.1016/j.corsci.2009.06.031 ↗
41. Y. Yang, Y.F. Cheng, Stress Enhanced Corrosion at the Tip of Near-Neutral pH Stress Corrosion Cracks on Pipelines Corrosion, 72 (2016) 1035-1043.10.5006/2045 ↗
42. The effect of NaCl-induced corrosion on Ti60′s hot salt stress corrosion cracking10.1016/j.corsci.2023.111677 ↗