Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments
Source abstract
Abstract
The effect of 0, 1, 3 wt% Mo addition on the corrosion behavior of Fe21Cr5.5Al was studied through steam tests at 400 °C and 1200 °C. At 400 °C, Mo addition leads to non-protective Fe-Mo oxide growth on the surface, compromising protective uniform Cr oxide growth and subsequent Al 2O 3 layers as in the Mo-free specimen. At 1200 °C, the presence of Mo causes the spallation of the surface oxide scale. However, a thin alumina surface film was present. Current results show that Mo addition is detrimental to the corrosion resistance of FeCrAl alloy under both operational and accidental temperature scenarios.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. An investigation of FeCrAl cladding behavior under normal operating and loss of coolant conditions10.1016/j.jnucmat.2017.04.039 ↗
2. S. Bragg-Sitton, Advanced Fuels Campaign Light Water Reactor Accident Tolerant Fuel Performance Metrics Executive Summary, Idaho National Lab.(INL), Idaho Falls, ID (United States), 2014.10.2172/1122119 ↗
3. Hydrogen-enhanced degradation and oxide effects in zirconium alloys for nuclear applications10.1016/j.ijhydene.2011.04.002 ↗
4. Accident tolerant fuel cladding development: promise, status, and challenges10.1016/j.jnucmat.2017.12.043 ↗
5. D.A. Powers, R.O. Meyer, Cladding swelling and rupture models for LOCA analysis. Technical report, Nuclear Regulatory Commission, Washington, DC (USA). Div. of Systems Safety, 1980.
6. F.J. Erbacher, S. Leistikow, Zircaloy fuel cladding behavior in a loss-of-coolant accident: A review, Zirconium in the Nuclear Industry ASTM STP 939 (1987) 451.10.1520/STP28138S ↗
7. W. Wiesenack, Summary of the Halden Reactor Project LOCA test series IFA-650, IFE-OECD Halden Reactor Project, HPR-380 (2013).
8. Advanced oxidation-resistant iron-based alloys for LWR fuel cladding10.1016/j.jnucmat.2013.06.041 ↗
9. Material selection for accident tolerant fuel cladding
10. Oxidation and creep limited lifetime of Kanthal APMT®, a dispersion strengthened FeCrAlMo alloy designed for strength and oxidation resistance at high temperatures10.1007/s11085-012-9324-4 ↗
11. High temperature properties of a new powder metallurgical FeCrAl alloy
12. Effect of aging and α’ segregation on oxidation and electrochemical behavior of FeCrAl alloys10.1016/j.jnucmat.2023.154751 ↗
13. Effect of aluminum on the FeCr (Al) alloy oxidation resistance in steam environment at low temperature (400C) and high temperature (1200C)10.1016/j.corsci.2022.110765 ↗
14. I. Roy, H. Abouelella, R. Rajendran, A. Chikhalikar, M. Larsen, R. Umretiya, D. Hoffman, R. Rebak, Effect of Al concentration on Fe-17Cr alloy during steam oxidation at 400C, Raul, Effect of Al Concentration on Fe-17cr Alloy During Steam Oxidation At 400 (2022).10.2139/ssrn.4218685 ↗
15. Iron-chrome-aluminum alloy cladding for increasing safety in nuclear power plants10.1051/epjn/2017029 ↗
16. Versatile oxide films protect FeCrAl alloys under normal operation and accident conditions in light water power reactors10.1007/s11837-017-2705-z ↗
17. Microstructure and mechanical properties of FeCrAl alloys under heavy ion irradiations10.1016/j.jnucmat.2018.03.002 ↗
18. Systematic study of radiation-induced segregation in neutron-irradiated FeCrAl alloys
19. Mechanical properties of neutron-irradiated model and commercial FeCrAl alloys10.1016/j.jnucmat.2017.03.038 ↗
20. H. Qu, M. Higgins, R. Umretiya, A. Hoffman, R. Rebak, FeCrAl Fuel/Clad Chemical Interaction in Light Water Reactor Environments, Journal of Nuclear Materials (2023) Under Revision.10.1016/j.jnucmat.2023.154717 ↗
21. A. Hoffman, H.J. Qu, I. Roy, S. Nag, C. Shen, C. Jiang, Y. Zhang, C. Perlee, M. Larsen, E. Jossou, S.K. Gill, R. Umretiya, R. Rebak, New Insights on the Effects of Chemistry and Temperature on Α’ Precipitation During Aging of Fecral Alloys, (2023). https://doi.org/10.2139/ssrn.4628912.10.2139/ssrn.4628912 ↗
22. Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors10.1016/j.anucene.2014.09.005 ↗
23. Microstructure and high temperature mechanical properties of as-cast FeCrAl alloys10.1016/j.msea.2018.04.039 ↗
24. Effect of Ni–Mo addition on cyclic and isothermal oxidation resistance and electrical behavior of ferritic stainless steel for SOFCs interconnect10.1016/j.ijhydene.2014.05.122 ↗
25. Oxidation characteristics of Fe22Cr5Al3Mo-xNb alloys in high temperature steam10.1016/j.corsci.2021.109722 ↗
26. Intermediate temperature corrosion behaviour of Fe-12Cr-6Al-2Mo-0.2Si-0.03Y alloy (C26M) at 300–600 °C10.1016/j.corsci.2019.05.029 ↗
27. Microstructural understanding of general and localized corrosion of Fe13Cr4Al2Mo1.2Nb alloy in high temperature aerated water and superheated steam10.1016/j.corsci.2022.110341 ↗
28. W. Qi, K. Yang, P. Wang, S. Du, X. Wang, Y. Qiao, T. Zheng, C. Bai, L. Zhang, High-Temperature Steam Oxidation Behavior of an Fecral Alloy with a Controlled Mo Addition, (2022). https://doi.org/10.2139/ssrn.4125262.10.2139/ssrn.4125262 ↗
29. Effects of Nb-doping on the mechanical properties and high-temperature steam oxidation of annealing FeCrAl fuel cladding alloys10.1016/j.msea.2020.140500 ↗
30. Effects of zirconium and oxygen on the oxidation of FeCrAl-ODS alloys under air and steam conditions up to 1500° C10.1016/j.jnucmat.2019.01.041 ↗
31. Effect of Al and Cr content on air and steam oxidation of FeCrAl alloys and commercial APMT alloy10.1007/s11085-017-9745-1 ↗
32. Mechanism of Al on FeCrAl steam oxidation behavior and molecular dynamics simulations10.1016/j.jallcom.2020.154310 ↗
33. Effect of nickel on the oxidation behavior of FeCrAl alloy in simulated PWR and BWR conditions10.1016/j.corsci.2023.111093 ↗
34. Processability evaluation of a Mo-containing FeCrAl alloy for seamless thin-wall tube fabrication10.1016/j.msea.2017.06.036 ↗
35. Evaluation of Laves-phase forming Fe–Cr alloy for SOFC interconnects in reducing atmosphere10.1016/j.jpowsour.2007.10.041 ↗
36. Influence of Mo content on the phase evolution and corrosion behavior of model Fe–9Cr–xMo (x= 5, 7, and 9 wt%) alloys10.1557/jmr.2015.157 ↗
37. Oxide morphology of a FeCrAl alloy, kanthal APMT, following extended aging in air at 300 °C to 600 °C10.1007/s11661-018-4649-5 ↗
38. Two-dimensional molybdenum trioxide and dichalcogenides10.1002/adfm.201300125 ↗
39. Effect of aluminum on the FeCr(Al) alloy oxidation resistance in steam environment at low temperature (400°C) and high temperature (1200°C)10.1016/j.corsci.2022.110765 ↗
40. Effect of Al concentration on Fe-17Cr alloy during steam oxidation at 400 °C10.1016/j.corsci.2023.111135 ↗
41. Raman studies of hexagonal MoO3 at high pressure10.1002/pssb.201000633 ↗
42. Exploring the high-temperature steam oxidation behaviors of the lean-Cr (7–10 wt%) FeCrAl alloys10.1016/j.corsci.2021.109927 ↗
43. Initial oxidation mechanism of FeCrAl thin films with Nb and Si additions10.1016/j.tsf.2023.140015 ↗
44. High temperature oxidation of molybdenum in water vapor environments10.1016/j.jnucmat.2013.10.043 ↗
45. Steam solubilities of solid MoO3, ZnO and Cu2O, calculated on a basis of a thermodynamic model10.1016/j.fluid.2012.11.027 ↗
46. Characterization of oxides formed on iron-chromium-aluminum alloy in simulated light water reactor environments10.1515/corrrev-2017-0011 ↗
47. Effect of molybdenum addition on oxidation behavior and secondary protection mechanism of FeCrAl coatings10.1016/j.matchar.2023.113221 ↗
48. Improvement of thermal stability in the solar selective absorbing Mo–Al2O3 coating10.1016/j.solmat.2012.11.010 ↗
49. Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment10.1016/j.corsci.2019.01.004 ↗
50. Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions10.1016/j.jnucmat.2016.10.021 ↗
51. Effect of Mo and Mn additions on the corrosion behaviour of AISI 304 and 316 stainless steels in H2SO410.1016/j.corsci.2007.11.004 ↗
52. Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys10.1080/1478422X.2018.1443991 ↗