Consequences of mobile and trapped hydrogen on the dissolution kinetics and pitting processes of an austenitic stainless steel
Source abstract
Abstract
The effect of cathodic hydrogen charging on corrosion behaviour of an AISI 316 L austenitic stainless steel in acidified sodium chloride is studied. A large set of electrochemical and physico-chemical methods allows to demonstrate that the oxide initial growth steps are little affected while the dissolution kinetics increase drastically in relation to hydrogen oxidation. This effect is mainly reversible with hydrogen desorption, highlighting the role of mobile hydrogen. Defects induced by hydrogen could be responsible for a small irreversibility. Hydrogen promotes the pitting processes, but seems to have few impacts on the passive film composition and thickness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. The effect of absorbed hydrogen on the corrosion of steels: review, discussion, and implications10.5006/2242 ↗
2. Perspectives on hydrogen uptake, diffusion and trapping10.1016/j.ijhydene.2015.06.147 ↗
3. Hydrogen embrittlement in different materials: a review10.1016/j.ijhydene.2018.09.201 ↗
4. The role of plasticity and hydrogen flux in the fracture of a tempered martensitic steel: a new design of mechanical test until fracture to separate the influence of mobile from deeply trapped hydrogen10.1016/j.actamat.2019.12.045 ↗
5. X. Feaugas, D. Delafosse, Chapter 9. Hydrogen and Crystal Defects Interactions: Effects on Plasticity and Fracture. In: "Mechanics - Microstructure - Corrosion" Coupling. Christine Blanc and Isabelle Aubert. ISTE; 2018. p. 199–219.10.1016/B978-1-78548-309-7.50009-0 ↗
6. Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel10.1016/j.actamat.2012.09.004 ↗
7. Thermodynamics of impurity-enhanced vacancy formation in metals10.1063/1.4974530 ↗
8. Hydrogen solubility and vacancy concentration in nickel single crystals at thermal equilibrium: New insights from statistical mechanics and ab initio calculations10.1016/j.jallcom.2015.09.252 ↗
9. Hydrogen–vacancy interactions in Ni–H solid solutions10.1016/j.jpcs.2006.02.021 ↗
10. A relation between the vacancy concentration and hydrogen concentration in the Ni–H, Co–H and Pd–H systems10.1016/j.jallcom.2005.02.077 ↗
11. Increase in dislocation density in cold-deformed Pd using H as a temporary alloying addition10.1016/j.scriptamat.2013.01.005 ↗
12. Hydrogen-induced γ→ɛ transformation and the role of ɛ-martensite in hydrogen embrittlement of austenitic steels10.1016/j.msea.2008.07.003 ↗
13. Hydrogen induced martensitic transformation and twin formation in stainless steels10.1051/jphyscol:1982478 ↗
14. The behaviour of 316L stainless steel in hydrogen10.1007/BF00563051 ↗
15. Hydrogen-induced phase transformations in type 304L stainless steels10.5006/0010-9312-24.4.110 ↗
16. Ab initio based understanding of the segregation and diffusion mechanisms of hydrogen in steels10.1007/s11837-014-1055-3 ↗
17. Temperature-dependent diffusion coefficients from ab initio computations: Hydrogen, deuterium, and tritium in nickel10.1103/PhysRevB.77.134305 ↗
18. A potentiostatic double-step method for measuring hydrogen atom diffusion and trapping in metal electrodes-I. Theory10.1016/0001-6160(87)90233-1 ↗
19. The diffusion and trapping of hydrogen in steel10.1016/0001-6160(70)90078-7 ↗
20. The effects of hydrogen on anodic dissolution and passivation of iron in alkaline solutions10.1016/j.corsci.2015.09.013 ↗
21. Hydrogen effects on pitting corrosion and semiconducting properties of nitrogen-containing type 316L stainless steel10.1016/j.electacta.2009.06.003 ↗
22. Hydrogen-facilitated anodic dissolution of austenitic stainless steels10.5006/1.3284854 ↗
23. The effect of permeated hydrogen on the pitting of 304 stainless steel10.1016/S0010-938X(97)00178-9 ↗
24. Hydrogen effects on the passive film formation and pitting susceptibility of nitrogen containing type 316L stainless steels10.1016/j.corsci.2005.05.003 ↗
25. The hydrogen-enhanced effects of chloride ions on the passivity of type 304 stainless steel10.1016/S0013-4686(00)00492-8 ↗
26. Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment10.1016/j.corsci.2019.108425 ↗
27. Effects of hydrogen and stress on the electrochemical and passivation behaviour of 304 stainless steel in simulated PEMFC environment10.1016/j.electacta.2018.10.028 ↗
28. On the estimation of the diffusion coefficient and distribution of hydrogen in stainless steel10.1016/j.scriptamat.2020.05.040 ↗
29. F. Martin, X. Feaugas, A. Oudriss, D. Tanguy, L. Briottet, J. Kittel, Chapter 8. State of Hydrogen in Matter: Fundamental Ad/Absorption, Trapping and Transport Mechanisms. In: "Mechanics - Microstructure - Corrosion" Coupling. Christine Blanc and Isabelle Aubert. ISTE; 2018. p. 171–197.10.1016/B978-1-78548-309-7.50008-9 ↗
30. Trap-governed hydrogen diffusivity and uptake capacity in ultrahigh-strength AERMET 100 steel10.1007/s11661-002-0032-6 ↗
31. Hydrogen trapping in martensitic steel investigated using electrochemical permeation and thermal desorption spectroscopy10.1016/j.scriptamat.2011.07.042 ↗
32. A classification of hydrogen traps in steel10.1007/BF02812023 ↗
33. On the implication of mobile hydrogen content on the surface reactivity of an austenitic stainless steel10.1016/j.electacta.2021.139684 ↗
34. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
35. Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation10.1016/S0749-6419(03)00076-7 ↗
36. Electrochemical hydrogen permeation tests under galvanostatic hydrogen charging conditions conventionally used for hydrogen embrittlement study
37. Effects of hydrogen on passive film and corrosion of AISI 310 stainless steel10.1016/S0010-938X(98)00147-4 ↗
38. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
39. Passivity of AISI 321 stainless steel in 0.5M H2SO4 solution studied by Mott-Schottky analysis in conjunction with the point defect model10.1016/j.arabjc.2012.02.015 ↗
40. XPS studies on passive film formed on stainless steel in a high-temperature and high-pressure methanol solution containing chloride ions10.1016/j.corsci.2008.07.006 ↗
41. XPS study of passive films formed on molybdenum-implanted austenitic stainless steels10.1002/sia.740190175 ↗
42. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: Influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
43. Surface composition of stainless steels during anodic dissolution and passivation studied by ESCA10.1149/1.2113683 ↗
44. Passivation-induced physicochemical alterations of the native surface oxide film on 316L austenitic stainless steel10.1149/2.0321911jes ↗
45. Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions10.1016/j.corsci.2006.11.001 ↗
46. J.F. Moulder, W.F. Stickle, E.P. Sobol, K.D. Bomben, Handbook of X-Ray Photoelectron Spectroscopy, Jill Chastain, Perkin-Elmer Corporation, 1992.
47. X-ray photoelectron spectroscopy studies of chromium compounds10.1002/sia.1983 ↗
48. Fukai · 2005
49. An atomistically-informed phase-field model for quantifying the effect of hydrogen on the evolution of dislocations in FCC metals10.1016/j.ijplas.2021.102937 ↗
50. The influence of hydrogen on cyclic plasticity of oriented nickel single crystal. Part II: Stability of edge dislocation dipoles10.1016/j.ijplas.2020.102667 ↗
51. The effect of absorbed hydrogen on the dissolution of steel10.1016/j.heliyon.2016.e00209 ↗
52. Diagnostic experimental results on the hydrogen embrittlement of austenitic steels10.1016/S1359-6454(02)00524-4 ↗
53. Effects of hydrogen on semiconductivity of passive films and corrosion behavior of 310 stainless steel10.1149/1.1391899 ↗
54. Investigation of the effect of hydrogen on the passive film on iron by surface analysis techniques10.1149/1.1538226 ↗
55. New interpretation of the effect of hydrogen on the ion distributions and structure of passive films on microalloyed steel10.1149/1.1737383 ↗
56. Hydrogen-facilitated anodic dissolution-type stress corrosion cracking of pipeline steels in near-neutral pH solution10.5006/1.3283971 ↗
57. Hydrogen in chromium: influence on corrosion potential and anodic dissolution in neutral NaCl solution10.1016/S0010-938X(00)00154-2 ↗
58. Electrochemical investigation of the effects of hydrogen on the stability of the passive film on iron10.1016/S0013-4686(01)00882-9 ↗
59. Quantitative analysis of repassivation kinetics of ferritic stainless steels based on the high field ion conduction model10.1016/S0013-4686(99)00415-6 ↗
60. Repassivation behavior of 316L stainless steel in borate buffer solution: Kinetics analysis of anodic dissolution and film formation10.1016/j.apsusc.2015.09.018 ↗
61. Theory of the oxidation of metals10.1088/0034-4885/12/1/308 ↗
62. Kinetics of Oxide Growth of Passive Films on Transition Metals
63. The mechanism of oxide film formation on austenitic stainless steels in high temperature water10.1016/S0010-938X(97)00140-6 ↗
64. Electrochemical behaviour of high nitrogen stainless steel in acidic solutions10.1016/j.corsci.2009.02.026 ↗
65. Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode technique10.1016/j.matchemphys.2005.10.016 ↗
66. Repassivation studies on an austenitic stainless steel in chloride solutions10.1016/0010-938X(75)90016-5 ↗
67. The growth kinetics of passive films and the role of defects10.1016/0010-938X(89)90028-0 ↗
68. Oxide film growth kinetics on metals and alloys: I. Physical model10.1149/2.036306jes ↗
69. The passivity of Type 316L stainless steel in borate buffer solution10.1016/j.jnucmat.2008.06.014 ↗
70. Chloride-induced alterations of the passive film on 316L stainless steel and blocking effect of pre-passivation10.1016/j.electacta.2019.135159 ↗
71. The mechanism of pitting initiation and propagation at deformation bands intersection of cold-rolled metastable stainless steel in acidic ferric chloride solution10.1007/s10853-019-03922-w ↗
72. Influence of cold working on the pitting corrosion resistance of stainless steels10.1016/j.corsci.2006.08.021 ↗
73. Effects of U‐bending on pitting corrosion of 304L stainless steel10.1002/srin.202000328 ↗
74. Effect of plastic deformation on pitting mechanism of SS30410.1007/s11661-019-05394-8 ↗
75. Influence of elastic deformation on initiation of pits on duplex stainless steels10.1149/1.1647995 ↗
76. Chapter 12 - Effect of stress/strain fields on electrochemical activity: metallurgy/stress interaction and surface reactivity
77. Pitting corrosion of metals: a review of the critical factors10.1149/1.1838615 ↗
78. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
79. Constant-phase-element behavior caused by resistivity distributions in films10.1149/1.3499565 ↗
80. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
81. Passive film of 18-8 stainless steel structure and its function10.1016/0010-938X(73)90031-0 ↗
82. High frequency impedance spectroscopy study of passive films formed on AISI 316 stainless steel in alkaline medium10.1016/j.jelechem.2004.01.015 ↗
83. Correlation between predictive and descriptive models to characterize the passive film – study of pure chromium by electrochemical impedance spectroscopy10.1016/j.electacta.2015.05.179 ↗
84. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
85. Questions on the kinetics of evolution on oxide-covered metals10.1149/1.2123954 ↗
86. The composition and properties on type 304 stainless steel on exposure to lithiated water at 100–350 °C10.1016/0010-938X(91)90110-B ↗
87. Comparison of different methods for measuring the passive film thickness on metals10.1016/j.electacta.2015.12.173 ↗
88. The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride10.1016/j.corsci.2010.11.010 ↗
89. EIS study of potentiostatically formed passive film on 304 stainless steel10.1016/j.electacta.2011.07.072 ↗
90. On the intrinsic coupling between constant-phase element parameters α and Q in electrochemical impedance spectroscopy10.1016/j.electacta.2012.04.020 ↗
91. Constant-phase-element behavior caused by resistivity distributions in films10.1149/1.3499564 ↗
92. The electronic structure of passive films formed on stainless steels10.1016/0010-938X(95)00084-W ↗
93. Investigation of the passivation process of plastically deformed 316L stainless steel using the high frequency capacitance obtained by EIS10.1002/maco.201810094 ↗
94. Stability of passive stainless steel in relation to the potential of passivation treatment10.1016/S0010-938X(70)80027-0 ↗
95. Selective dissolution and surface enrichement of alloy components of passivated Fe18Cr and Fe18Cr3Mo single crystals10.1016/0010-938X(79)90026-X ↗
96. Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless steel surfaces10.1039/C4FD00231H ↗
97. Influence of the chemical composition of stainless steels on the electronic structure of passive films formed in artificial sea water10.4152/pea.200403263 ↗
98. Passive films on stainless steels-chemistry, structure and growth - Olsson.pdf10.1016/S0013-4686(02)00841-1 ↗
99. Resistance to pitting and chemical composition of passive films of a Fe-17%Cr alloy in chloride-containing acid solution10.1149/1.2059166 ↗
100. A round robin on combined electrochemical and AES/ESCA characterization of the passive films on Fe-Cr and Fe-Cr-Mo alloys10.1016/0010-938X(88)90026-1 ↗