Influence of temperature on the corrosion testing of anodized aerospace alloys
Source abstract
Abstract
Abstract Corrosion testing of anodized aerospace alloys is often performed by immersion and salt spray tests, according to specific international standards. The two tests differ not only in the physical exposure conditions but also in the standard testing temperature. In this work, the individual effects of temperature and exposure type on the protective performance of different anodic oxides are considered. It is found that the testing temperature has a significant effect on the overall corrosion behavior of the anodized alloy during the immersion test, but it has a reduced effect during the salt spray test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. The study of thin films by electrochemical impedance spectroscopy
2. A review on anodizing of aerospace aluminum alloys for corrosion protection
3. Effect of anodizing parameters on film morphology and corrosion resistance of AA2099 aluminum-lithium alloy10.1149/2.1081607jes ↗
4. Exploring the use of an AC-DC-AC technique for the accelerated evaluation of anticorrosion performance of anodic films on aluminium alloys
5. FESEM and EIS study of sealed AA2024 T3 anodized in sulfuric acid electrolytes: influence of tartaric acid10.1149/1.2969277 ↗
6. Corrosion in high-temperature and supercritical water and aqueous solutions: a review10.1016/S0896-8446(03)00031-7 ↗
7. Key issues related to modelling of internal corrosion of oil and gas pipelines – a review10.1016/j.corsci.2007.06.006 ↗
8. Factors controlling corrosion in high-temperature aqueous solutions: a contribution to the dissociation and solubility data influencing corrosion processes10.1016/S0896-8446(99)00009-1 ↗
9. The solubility of nitrogen, oxygen and argon in water and seawater10.1016/0011-7471(70)90037-9 ↗
10. New measurements of oxygen solubility in pure and natural water110.4319/lo.1966.11.2.0264 ↗
11. The solubility of gases in distilled water and sea water-II. Oxygen10.1016/0011-7471(69)90021-7 ↗
12. The solubility of oxygen in pure water and sea-water10.1002/jctb.5010050201 ↗
13. The solubility of oxygen in brines from 0 to 300 °10.1021/i260074a018 ↗
14. Dependence on temperature, pH, and Cl− in the uniform corrosion of aluminum alloys 2024-T3, 6061-T6, and 7075-T610.1016/j.electacta.2016.03.125 ↗
15. The aluminum chemistry and corrosion in alkaline solutions10.1016/j.jnucmat.2008.11.009 ↗
16. Effect of pH on thickness and ion content of the oxide film on aluminum in NaCl media10.1149/1.1376118 ↗
17. Hydrated oxide film growth on aluminium alloys immersed in warm water10.1016/j.surfcoat.2004.10.011 ↗
18. Corrosion testing of anodized aerospace alloys: comparison between immersion and salt spray testing using electrochemical impedance spectroscopy10.1149/1945-7111/ab74e3 ↗
19. Structural features of self-organized nanopore arrays formed by anodization of aluminum in oxalic acid at relatively high temperatures10.1016/j.electacta.2009.01.046 ↗
20. Self-ordering behavior of anodic porous alumina via selenic acid anodizing10.1016/j.electacta.2014.06.078 ↗
21. Investigation of intrinsic mechanisms of aluminium anodization processes by analyzing the current density10.1039/c2ra01050j ↗
22. Role of tartaric acid on the anodizing and corrosion behavior of AA 2024 T3 aluminum alloy10.1149/1.3077602 ↗
23. Cyclic oxidation processes during anodizing of Al–Cu alloys10.1016/j.electacta.2007.05.052 ↗
24. The effect of different carboxylic acids on the sulfuric acid anodizing of AA202410.1016/j.surfcoat.2019.125283 ↗
25. Effect of postreatment on the corrosion behaviour of tartaric-sulphuric anodic films10.1016/j.electacta.2009.03.083 ↗
26. Application of EIS to in situ characterization of hydrothermal sealing of anodized aluminum alloys: comparison between hexavalent chromium-based sealing, hot water sealing and cerium-based sealing10.1149/2.0231610jes ↗
27. Reducing the energy cost of protective anodizing10.1007/s10800-011-0295-y ↗
28. Graded anodic film morphologies for sustainable exploitation of aluminium alloys in aerospace10.4028/www.scientific.net/AMR.38.48 ↗
29. Corrosion behavior of anodized Al-Cu-Li alloy: the role of intermetallic particle-introduced film defects10.1016/j.corsci.2019.108110 ↗
30. Anodising of 2024-T3 aluminium alloy in electrolyte of sulphuric− boric−phosphoric mixed acid containing cerium salt as corrosion inhibitor10.1016/S1003-6326(17)60079-7 ↗
31. Barsoukov · 2018
32. Hoar · 1962
33. Characterization of porous aluminium oxide films from a.c. impedance measurements10.1023/A:1003481418291 ↗
34. AC-Impedance measurements on corroded porous aluminum oxide films10.1149/1.2108756 ↗
35. Evaluation of anodized aluminum surfaces with electrochemical impedance spectroscopy10.1149/1.2095786 ↗
36. Characterization of anodized and sealed aluminium by EIS10.1016/S0010-938X(02)00137-3 ↗
37. Molybdate/sulfuric acid anodising of 2024-aluminium alloy: influence of inhibitor concentration on film growth and on corrosion resistance10.1016/S0257-8972(03)00511-5 ↗
38. EIS characterisation of anodic films formed on 2024 aluminium alloy, in sulphuric acid containing molybdate or permanganate species10.1016/j.corsci.2004.06.019 ↗
39. Effects of pore parameters on performance of anodic film on 2024 aluminum alloy10.1016/j.matchemphys.2019.04.008 ↗
40. Enhancing aluminum corrosion resistance by two-step anodizing process10.1016/j.surfcoat.2013.08.046 ↗
41. Changes in cold sealed aluminium oxide films during ageing10.1023/A:1003569330080 ↗
42. Evaluation of the corrosion resistance of anodized aluminum 6061 using electrochemical impedance spectroscopy (EIS)10.1016/j.corsci.2008.09.008 ↗
43. A study on the self-sealing process of anodic films on aluminum by EIS10.1016/j.surfcoat.2005.10.031 ↗
44. Anodising of Al 2024-T3 in a modified sulphuric acid/boric acid bath for aeronautical applications10.1016/S0010-938X(02)00082-3 ↗
45. Effect of acid traces on hydrothermal sealing of anodising layers on 2024 aluminium alloy10.1016/j.electacta.2010.07.089 ↗
46. The effect of exposure conditions on performance evaluation of post-treated anodic oxides on an aerospace aluminium alloy: comparison between salt spray and immersion testing10.1016/j.surfcoat.2020.126157 ↗