Effects of silicon and manganese content on the oxidation behavior of FeMnSiCrNi alloys and the correlation between Mn-depleted zone, surface roughness and oxidation resistance
Source abstract
Abstract
Abstract Manganese and silicon effect on high-temperature cyclic oxidation was evaluated in three austenitic shape-memory FeMnSiCrNi alloys, including a novel high-silicon alloy (Fe-17Mn-8Si-10Cr-4Ni-NbC). Mass variation, Mn-depleted zone and metal/oxide interface roughness analyses were used to study the oxidation behavior. Renewed mass gain after spallation was observed for Fe12Mn5Si and Fe17Mn5Si alloys, while Fe17Mn8Si continuously lost mass, associated with low metal/oxide interface roughness and the ferritizing potential of Si. Low manganese availability led Fe12Mn5Si to suffer internal oxidation and iron oxide formation. Here, neither increasing silicon nor reducing manganese increased cyclic oxidation resistance of the alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Reconciling viability and cost-effective shape memory alloy options – a review of copper and iron based shape memory metallic systems
2. Effects of alloying additions on Fe-Mn-Si shape memory alloys10.2355/isijinternational.30.674 ↗
3. Oxidation behavior of an austenitic stainless FeMnSiCrNi shape memory alloy10.1016/j.corsci.2012.09.029 ↗
4. High temperature cyclic oxidation behavior of a low manganese Fe12Mn9Cr5Si4Ni-NbC shape memory stainless steels10.1016/j.jallcom.2020.158198 ↗
5. Kinetics oxidation and characterization of cyclically oxidized layers at high temperatures for FeMnSiCrNiCe and FeSiCrNi alloys10.1590/1980-5373-mr-2017-0098 ↗
6. Insights into high-temperature oxidation of Fe-Mn-Si-Cr-Ni shape memory stainless steels and its relationship to alloy chemical composition10.1016/j.corsci.2019.108269 ↗
7. The oxidation of Fe-19.6Cr-15.1Mn stainless steel10.1007/BF00751800 ↗
8. The oxidation of iron-chromium-manganese alloys at 900°C10.1007/BF00938460 ↗
9. Corrosion behavior of shape memory stainless steel in acid media10.1016/j.jallcom.2011.02.051 ↗
10. Characterization of passive films on shape memory stainless steels10.1016/j.corsci.2011.12.022 ↗
11. Influence of alloying elements on the corrosion properties of shape memory stainless steels10.1016/j.matchemphys.2012.01.049 ↗
12. High temperature oxidation resistance improvement in an FeMnSiCrNi alloy by Mn-depletion under vacuum annealing10.1016/j.matlet.2019.01.074 ↗
13. Anomalous cyclic oxidation behaviour of a Fe–Mn–Si–Cr–Ni shape memory alloy10.1016/j.corsci.2017.02.026 ↗
14. Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy - a finite element analysis10.1016/j.corsci.2018.11.018 ↗
15. Metal/oxide interface roughness evolution mechanism of an FeMnSiCrNiCe shape memory stainless steel under high temperature oxidation10.1016/j.corsci.2019.108228 ↗
16. International Organization for Standardization · 2012
17. International Organization for Standardization · 2012
18. Cyclic oxidation – guidelines for test standardisation, aimed at the assessment of service behaviour†
19. Oxidation of AISI 304 and AISI 439 stainless steels10.1016/j.msea.2006.10.022 ↗
20. Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance10.1016/j.msea.2013.10.014 ↗
21. Improvement of oxidation resistance of an Fe-Mn-Si-Cr shape memory alloy by annealing under vacuum10.2320/matertrans.46.1745 ↗
22. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
23. Microstructure and surface oxidation behavior of an austenitic Fe-Mn-Si-Cr-Ni-Co shape memory stainless steel at 800 °C in air10.1016/j.corsci.2019.108103 ↗
24. Sur 1’ oxydation du manganese dans l’air aux température élevées10.1016/0001-6160(59)90024-0 ↗
25. Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies10.1016/S0921-5093(01)01529-5 ↗
26. Infuence of temperature on the oxidation behaviour of an austenitic stainless FeMnSiCrNi shape memory alloy10.1007/s11085-019-09916-y ↗
27. Influence of minor additions to Fe-Mn-Al alloys in an oxidizing environment - role of a cerium oxide modified surface on silicon containing alloys
28. Initial stages of FeMnSiCrNi shape memory stainless steels oxidation mechanism at 800 °C10.1016/j.corsci.2021.109255 ↗
29. Stress effects in high temperature oxidation of metals10.1179/imr.1995.40.1.1 ↗
30. Thermal expansion of high-silicon cast iron
31. The effect of Mn-depleted surface layer on the corrosion resistance of shape memory Fe-Mn-Si-Cr alloys10.1007/s11661-997-0287-z ↗
32. Oxidation of stainless steels (AISI 304 and 316) at high temperature. Influence on the metallic substratum
33. Critical evaluation and thermodynamic modeling of the Mn–Cr–O system for the oxidation of SOFC interconnect10.1016/j.ssi.2006.01.012 ↗
34. The diffusion of chromium in a duplex alloy steel10.1179/030634576790431859 ↗
35. Diffusion of chromium, manganese, and iron in MnCr2O4 spinel10.1007/s11669-005-0051-2 ↗
36. Atomic mobilities, uphill diffusion and proeutectic ferrite growth in Fe–Mn–C alloys10.1016/j.calphad.2009.07.002 ↗
37. Test methods and data on the mechanical properties of protective oxide scales10.1179/mht.2001.004 ↗
38. Bond coatings with high rumpling resistance: design and characterization10.1016/j.surfcoat.2016.05.002 ↗
39. On the rumpling mechanism in nickel-aluminide coatings