NaCl-induced hot-corrosion behavior and mechanism of TiSiCN/Ag nanocomposite coatings by arc ion plating
Source abstract
Abstract
TiSiCN/Ag nanocomposite coatings were deposited on the surface of titanium alloys by multi-arc ion plating. Under thermal-salt coupling, the coatings` hot corrosion behavior was studied. The corrosion resistance of titanium alloys can be greatly enhanced by the TiSiCN/Ag nanocomposite coatings. The reason is that the introduction of Ag can prevent the growth of columnar crystals and obtain a dense nanocomposite coating, thus reducing the invasion channels of Cl - and O 2. Secondly, Ag can efficiently bind Cl - and prevent its diffusion, protecting the coating and titanium substrate from Cl - damage.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Cutting performance and wear behavior of AlTiN and TiAlSiN-Coated carbide tools during dry milling of Ti-6Al-4V10.1007/s40195-020-01010-6 ↗
2. Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-β titanium alloy10.1016/j.msea.2010.11.004 ↗
3. Hot workability of titanium and titanium aluminide alloys-an overview10.1016/S0921-5093(97)00776-4 ↗
4. Studies on corrosion resistance of thick Ti/TiN multilayer coatings under solid NaCl-H2O-O2 at 450 ℃10.1016/j.ceramint.2020.04.267 ↗
5. NaCl induced corrosion of Ti-6Al-4V alloy at high temperature10.1016/j.corsci.2016.04.016 ↗
6. Erosion performance and characterization of nanolayer (Ti,Cr)N hard coatings for gas turbine engine compressor blade applications10.1016/j.surfcoat.2011.07.063 ↗
7. Effect of streaming water vapor on the corrosion behavior of Ti60 alloy under a solid NaCl deposit in water vapor at 600 °C10.1016/j.corsci.2019.108177 ↗
8. Corrosion behaviors of nitride coatings on titanium alloy in NaCl-Induced hot corrosion10.1007/s40195-021-01264-8 ↗
9. Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation10.1016/j.jmst.2019.11.017 ↗
10. Oxidation behavior of a nanocrystalline coating with low Ta content at high temperature10.1016/j.corsci.2020.109182 ↗
11. Hot corrosion behavior of Cr2AlC MAX phase and CoNiCrAlY compounds at 950 degrees C in presence of Na2SO4+V2O5 molten salts10.1016/j.ceramint.2020.09.077 ↗
12. A new insight into the NaCl-induced hot corrosion mechanism of TiN coatings at 500 degrees C10.1016/j.corsci.2020.108794 ↗
13. Elastic properties and stacking fault energies of borides, carbides and nitrides from first-principles calculations10.1007/s40195-019-00873-8 ↗
14. Corrosion behavior and adhesion of ion-plated TiN films on AISI 304 steel10.1016/S0254-0584(00)00255-8 ↗
15. Microstructure evolution and corrosion resistance of multi interfaces Al-TiAlN nanocomposite films on AZ91D magnesium alloy10.1016/j.surfcoat.2018.09.019 ↗
16. Influence of CrN-coating thickness on the corrosion resistance behaviour of aluminium-based bipolar plates10.1016/j.jpowsour.2010.11.069 ↗
17. Corrosion behavior of nanolayered TiN/NbN multilayer coatings prepared by reactive direct current magnetron sputtering process10.1016/j.tsf.2004.01.096 ↗
18. The corrosion resistance and wear resistance of thick TiN coatings deposited by arc ion plating10.1016/S0257-8972(01)01284-1 ↗
19. High corrosion resistance and surface conductivity of (Ti1-xCrx)N coating for titanium bipolar plate10.1016/j.corsci.2022.110256 ↗
20. Influence of the negative bias in ion plating on the microstructural and tribological performances of Ti-Si-N coatings in seawater10.1016/j.surfcoat.2015.09.005 ↗
21. High Si content TiSiN films with superior oxidation resistance10.1016/j.surfcoat.2020.126087 ↗
22. Study of NaCl-induced hot-corrosion behavior of TiN single-layer and TiN/Ti multilayer coatings at 500 °C10.1016/j.corsci.2021.109838 ↗
23. Cyclic oxidation behaviour of Ti/TiAlN composite multilayer coatings deposited on titanium alloy10.1016/j.corsci.2020.108476 ↗
24. The improved corrosion and tribocorrosion properties of TiSiN/Ag by thermal treatment10.1016/j.surfcoat.2020.125437 ↗
25. Bioinspired nanoheterogeneous alternating multiarched architecture: toward a superior strength-toughness integration10.1021/acsami.2c07899 ↗
26. High temperature oxidation and hot corrosion behaviors of PEO and PEO/polysilazane preceramic-based dual-layer coatings on Ti-6Al-4V alloy10.1016/j.corsci.2023.111076 ↗
27. Synthesis of a new orthorhombic form of diamond in varying-C VN films: microstructure, mechanical and tribological properties10.1016/j.apsusc.2019.03.126 ↗
28. Lai, First principles calculation of intermetallic compounds in FeTiCoNiVCrMnCuAl system high entropy alloy10.1016/S1003-6326(11)61338-1 ↗
29. Multi-arc ion plating and DC magnetron sputtering integrated technique for high-performance Al,C-co-doped δ-TiN quaternary films10.1016/j.corsci.2021.109261 ↗
30. Effect of chromium on erosion-corrosion properties of ZrO2-Al2O3 particles reinforced Fe-based composites in artificial seawater slurries10.1016/j.corsci.2022.110138 ↗
31. NaCl-induced hot-corrosion behavior of TiAlN single-layer and TiAlN/Ti multilayer coatings at 500 °C, Materials Today
32. NaCl-induced hot corrosion of a titanium aluminide alloy10.1016/0921-5093(95)03345-9 ↗
33. F.C. Thompson, F.M. Kustas, G.A. Crawford, Oil-lubricated sliding wear performance of TiSiCN-coated ductile iron, Wear, 514–515 (2023) 204567.10.1016/j.wear.2022.204567 ↗
34. Tribocorrosion performance of nano-layered coating in artificial seawater10.1016/j.apsusc.2019.05.119 ↗
35. Raman chemical imaging of tribological nitride coated (TiN, TiAlN) surfaces10.1016/S0043-1648(02)00058-3 ↗
36. Effect of carbon addition on tribological performance of TiSiN coatings produced by cathodic arc physical vapour deposition10.1016/j.surfcoat.2020.126781 ↗
37. Conversion of AgCl nanocubes to Ag/AgCl nanohybrids via solid-liquid reaction for surface-enhanced Raman scattering detection10.1049/mnl.2014.0091 ↗
38. Hot corrosion behaviour of Ti-6Al-4V modified by ultrasonic shot peening10.1016/j.matdes.2016.07.133 ↗
39. Synergistic corrosion behavior of coated Ti60 alloys with NaCl deposit in moist air at elevated temperature10.1016/j.corsci.2007.06.007 ↗
40. The hydrogen embrittlement of titanium-based alloys10.1007/s11837-005-0115-0 ↗
41. Hot corrosion behaviour of (γ+α2)-Ti-46Al-8Nb (at%) and α-Ti-6Al-1Mn (at%) alloys10.1016/j.corsci.2016.11.006 ↗
42. Corrosion behavior of pure Cr with a solid NaCl deposit in O−2 plus water vapor10.1023/A:1004690518225 ↗
43. Corrosion behaviour of aluminide coatings on Ti-based alloy in the marine environment at high temperature10.1016/j.corsci.2022.110750 ↗
44. Effect of stress loading on hot salt corrosion behavior of TiAlTaN/CrAlN multilayer coatings10.1016/j.corsci.2023.111286 ↗
45. AgCl-induced hot salt stress corrosion cracking in a titanium alloy10.1016/j.corsci.2021.109497 ↗