High temperature oxidation of AISI 441 in simulated solid oxide fuel cell anode side conditions
Source abstract
Abstract
This study investigates the corrosion of AISI 441 in simulated anode conditions of solid oxide fuel cells (SOFCs). Several parameters such as temperature, humidity, surface condition, pre-oxidation temperature and environment, were investigated. Samples pre-oxidized at 800 ºC were protective at 550–900 ºC, while as-received samples showed protective behavior only at 900 ºC. Additional exposures performed at 600 ºC revealed the negative effect of increasing steam concentration, the beneficial effect of grinding, while pre-oxidation at 600 ºC did not improve the protectiveness. The role and the interplay of the aforementioned factors are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. O’hayre · 2006
2. Kendall · 2016
3. Role of solid oxide fuel cells in a balanced energy strategy10.1039/C1EE02445K ↗
4. Elcogen OY. Solid Oxide Fuel Cells: Opportunities for a clean energy future, 2019. 〈https://elcogen.com/wp-content/uploads/2019/04/elcogen-sofc-white-paper-2019.pdf〉, in.
5. Materials for intermediate-temperature solid-oxide fuel cells10.1146/annurev-matsci-070813-113426 ↗
6. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
7. Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques10.1016/j.ijhydene.2016.03.195 ↗
8. Recent development of SOFC metallic interconnect10.1016/S1005-0302(10)60049-7 ↗
9. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
10. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
11. Cr evaporation of metallic interconnects: a novel method for quantification, solid oxide
12. Investigation of chromium volatilization from FeCr interconnects by a denuder technique10.1149/1.3462987 ↗
13. The effect of temperature on chromium vaporization and oxide scale growth on interconnect steels for Solid Oxide Fuel Cells10.1016/j.jpowsour.2015.04.040 ↗
14. Does the conductivity of interconnect coatings matter for solid oxide fuel cell applications?10.1016/j.jpowsour.2018.02.060 ↗
15. Severe dual atmosphere effect at 600 degrees C for stainless steel 44110.1016/j.jpowsour.2015.10.001 ↗
16. Temperature dependence of corrosion of ferritic stainless steel in dual atmosphere at 600-800 degrees C10.1016/j.jpowsour.2018.04.088 ↗
17. The effect of pre-oxidation parameters on the corrosion behavior of AISI 441 in dual atmosphere10.1016/j.ijhydene.2018.05.165 ↗
18. The effect of metallic Co-coating thickness on ferritic stainless steels intended for use as interconnect material in intermediate temperature solid oxide fuel cells10.1007/s11085-017-9782-9 ↗
19. Co- and Ce/Co-coated ferritic stainless steel as interconnect material for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2017.01.045 ↗
20. Chromium vaporization from mechanically deformed pre-coated interconnects in solid oxide fuel cells10.1016/j.jpowsour.2015.07.085 ↗
21. Anomalous corrosion behavior of stainless steels under SOFC interconnect exposure conditions10.1149/1.1603012 ↗
22. High temperature oxidation/corrosion behavior of metals and alloys under a hydrogen gradient10.1016/j.ijhydene.2006.08.056 ↗
23. Oxidation behavior of stainless steel 430 and 441 at 800 degrees C in single (air/air) and dual atmosphere (air/hydrogen) exposures10.1016/j.ijhydene.2007.12.067 ↗
24. The effect of water vapor on selective oxidation of Fe-Cr alloys10.1007/s11085-007-9090-x ↗
25. Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments10.1016/j.corsci.2006.02.002 ↗
26. Enhanced internal oxidation as trigger for breakaway oxidation of Fe-Cr alloys in gases containing water vapor10.1016/j.scriptamat.2007.06.058 ↗
27. Temperature dependence of oxide scale formation on high-Cr ferritic steels in Ar-H2-H2O10.1016/j.corsci.2011.02.031 ↗
28. Temperature and gas composition dependence of internal oxidation kinetics of an Fe-10%Cr alloy in water vapour containing environments10.1002/maco.201005865 ↗
29. High temperature oxidation of Fe-Cr alloy in O2-H2-H2O atmospheres; microstructure and kinetics10.1016/S0921-5093(03)00527-6 ↗
30. The mechanism of the high-temperature oxidation of iron-chromium alloys in water vapor10.1149/1.2425963 ↗
31. Mechanisms of chromia scale failure during the course of 15-18Cr ferritic stainless steel oxidation in water vapour10.3184/096034005782750527 ↗
32. Effect of water vapor on high-temperature oxidation of FeCr alloys10.1007/s11837-009-0102-y ↗
33. The effect of hydrogen on the breakdown of the protective oxide scale in solid oxide fuel cell interconnects10.1016/j.corsci.2020.109112 ↗
34. K44M ferritic stainless steel as possible interconnect material for SOFC stack operating at 600 degrees C: characterization of the oxidation behaviour at early working stages10.1016/j.ijhydene.2015.01.083 ↗
35. Oxidation of binary FeCr alloys (Fe-2.25Cr, Fe-10Cr, Fe-18Cr and Fe-25Cr) in O2 and in O2 + H2O environment at 600 °C10.1007/s11085-010-9229-z ↗
36. Oxidation of Fe–10Cr in O2 and in O2+H2O environment at 600 °C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
37. Oxidation after breakdown of the chromium-rich scale on stainless steels at high temperature: internal oxidation10.1007/s11085-016-9610-7 ↗
38. Phase transformation behavior of oxide scale on plain carbon steel containing 0.4 wt% Cr during continuous cooling10.2355/isijinternational.ISIJINT-2018-365 ↗
39. The mechanism of phase transformation in thermally-grown FeO scale formed on pure-fe in air10.1007/s11085-013-9442-7 ↗
40. Phase transformation of thermally grown FeO formed on high-purity fe at low oxygen potential10.1007/s11085-020-09979-2 ↗
41. Mechanism of magnetite seam formation and its role for FeO scale transformation10.1007/s11085-016-9638-8 ↗
42. Isothermal transformation behavior of thermally-grown wustite10.1179/mht.2000.17.2.020 ↗
43. Effect of Mn on isothermal transformation of thermally grown FeO Scale Formed on Fe-Mn Alloys10.1007/s11085-016-9661-9 ↗
44. Effect of water vapor on the oxidation mechanisms of a commercial stainless steel for interconnect application in high temperature water vapor electrolysis10.1007/s11085-012-9338-y ↗
45. The Effect of H2 and H2O on the oxidation of 304l-stainless steel at 600 °C: general behaviour (Part I)10.1007/s11085-015-9597-5 ↗
46. Reaktionstypen bei der oxydation von legierungen, Zeitschrift für Elektrochemie
47. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
48. H. Tanei, Y. Kondo, Phase transformation of oxide scale and its control, in: Nippon Steel & Sumitomo Metal Technical Report 2016, pp. 87–91.
49. Initial oxidation and chromium diffusion. I. Effects of surface working on 9-20% Cr steels10.1016/j.corsci.2003.09.004 ↗
50. Effect of water vapour on growth and adherence of chromia scales formed on Cr in high and low PO2-environments at 1000 and 1050 degrees C10.3184/096034005782744443 ↗
51. Effects of water vapour on the oxidation of chromia formers10.4028/www.scientific.net/MSF.595-598.1189 ↗
52. Growth and adherence of chromia based surface scales on Ni-base alloys in high- and low-pO2 gases10.1016/j.msea.2007.05.035 ↗
53. Hydrogen in chromium: influence on the high-temperature oxidation kinetics in H2O oxide-growth mechanisms and scale adherence10.1023/A:1004610626903 ↗
54. Hydrogen in chromium: influence on the high-temperature oxidation kinetics in O2 oxide-growth mechanisms and scale adherence10.1023/A:1018866505708 ↗
55. Water vapour effects on the oxidation of chromia-forming alloys10.4028/www.scientific.net/MSF.696.200 ↗
56. Effect of in-situ gas changes on thermally grown chromia scales formed on Ni-25Cr alloy at 1000 °C in atmospheres with and without water vapour10.1179/0960340914Z.000000000108 ↗
57. Effect of specimen thickness on chromia scaling of Ni25Cr in N2-O2-H2O test gases at 1000 °C10.1179/0960340914Z.00000000092 ↗
58. What did we learn on the reactive element effect in chromia scale since Pfeil’s patent?10.1002/maco.201307310 ↗
59. Mechanisms of oxide scale formation on ferritic interconnect steel in simulated low and high pO2 service environments of solid oxide fuel cells10.1007/s11085-014-9481-8 ↗
60. Study of the growth mechanism of some oxide scales on alloy 230 in high temperature vapor electrolysis (HTVE) conditions10.4028/www.scientific.net/DDF.323-325.577 ↗
61. Internal oxidation in dry and wet conditions for oxygen permeability of Fe-Ni alloys at 1150 and 1100 °C10.1007/s11085-017-9724-6 ↗
62. Oxygen permeability measurements in Ni Using H2/H2O, CO/CO2 and Ni/NiO rhines pack atmospheres10.1007/s11085-014-9511-6 ↗
63. Effect of hydrogen on the internal oxidation of a Pd-Cr alloy in Dual-Atmosphere conditions10.1007/s11085-022-10104-8 ↗
64. Effect of pre-oxidation on the oxidation resistance of Crofer 22 APU10.1016/j.corsci.2018.04.016 ↗
65. Effect of pre-oxidation and environmental aging on the seal strength of a novel high-temperature solid oxide fuel cell (SOFC) sealing glass with metallic interconnect10.1016/j.jpowsour.2008.06.020 ↗
66. On the effect of surface treatment to improve oxidation resistance and conductivity of metallic interconnects for SOFC in operating conditions10.4028/www.scientific.net/MSF.595-598.753 ↗
67. Effects of alloy heat treatment on oxidation kinetics and scale morphology for Crofer 22 APU10.1016/j.jpowsour.2013.03.181 ↗
68. SOFC performance with Fe-Cr-Mn alloy interconnect10.1149/1.1864332 ↗
69. Oxidation behavior of coated and preoxidized ferritic steel in single and dual atmosphere exposures at 800 degrees C10.1016/j.surfcoat.2011.09.054 ↗
70. Study of ion diffusion in oxidation films grown on a model Fe-15%Cr alloy10.1016/j.ssi.2015.03.027 ↗
71. Effect of oxide grain structure on high-temperature oxidation of Cr10.1007/BF00611694 ↗
72. Growth kinetics and characterization of chromia scales formed on Ni-30Cr alloy in impure argon at 700 oC10.1007/s11085-020-09958-7 ↗
73. High temperature oxidation of chromium: kinetic modeling and microstructural investigation10.1016/j.ssi.2013.02.017 ↗
74. Protective and nonprotective behavior of 11% Cr steel in O2+H2O environment at 450-700 oC10.1149/1.1753584 ↗
75. Effect of cold work on the oxidation of iron in water vapour at 550 °C10.1016/S0010-938X(67)80016-7 ↗
76. Rate of oxidation of iron to wustite in water-hydrogen gas mixtures10.1021/j100885a052 ↗
77. The kinetic behaviour of metals in water vapour at high temperatures: can general rules be proposed?10.4028/www.scientific.net/MSF.369-372.231 ↗
78. On the theoretical and experimental control of defect chemistry and electrical and photoelectrochemical properties of hematite nanostructures10.1021/acsami.8b16911 ↗
79. Defects and cation diffusion in magnetite.6. point-defect relaxation and correlation in cation tracer diffusion10.1002/bbpc.19860900703 ↗
80. Oxidation of Ni-Cr alloy at intermediate oxygen pressures. I. Diffusion mechanisms through the oxide layer10.1016/j.corsci.2016.05.025 ↗