Corrosion behaviour of Fe-25Cr alloy in wet CO2 gas at 650 °C: Effects of chloride deposits and Si+Mn alloying addition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Carbon dioxide separation from flue gases: a technological review emphasizing reduction in greenhouse gas emissions10.1155/2014/828131 ↗
2. Effect of coal ash on the performance of alloys in simulated oxy-fuel environments10.1016/j.fuel.2013.09.021 ↗
3. Water vapour effects on corrosion of Fe–Cr and Fe–Cr–Ni alloys containing cerium and manganese in CO2 gas at 818°C10.1016/j.corsci.2014.08.029 ↗
4. Water vapour effects on corrosion of Fe-Cr and Fe-Cr-Ni alloys containing cerium and manganese in CO2 gas at 818oC10.1016/j.corsci.2014.08.029 ↗
5. Corrosion behaviour of Ni-Cr alloys in wet CO2 atmosphere at 700 and 800 °C10.1016/j.corsci.2018.10.029 ↗
6. Corrosion of Fe-9Cr-(Mn, Si) alloys in CO2-H2O-SO2 gases10.1016/j.corsci.2015.05.040 ↗
7. High temperature corrosion of Fe-Cr-(Mn/Si) alloys in CO2-H2O-SO2 gases10.1016/j.corsci.2016.07.026 ↗
8. Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler10.1021/ef060306c ↗
9. The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits10.1016/0010-938X(95)00011-8 ↗
10. Deposition and high temperature corrosion in a 10 MW straw fired boiler10.1016/S0378-3820(97)00062-3 ↗
11. The influence of sulfur additions on the corrosive environments in a waste-fired CFB boiler10.4028/www.scientific.net/MSF.522-523.563 ↗
12. Impact of oxyfuel atmospheres H2O/CO2/O2 and H2O/CO2 on the oxidation of ferritic–martensitic and austenitic steels10.1016/j.corsci.2011.03.015 ↗
13. Corrosion behavior of heat-resistant materials in high-temperature carbon dioxide environment10.1007/s11837-018-2975-0 ↗
14. FactSage 8.1 Thermochemical Software and Database (accessed July 2021). 2021.
15. Control of M23C6 carbides in 0.45C–13Cr martensitic stainless steel by means of three representative heat treatment parameters10.1016/S0921-5093(97)00491-7 ↗
16. Carburization of Fe‐Cr alloys during oxidation in dry carbon dioxide10.1149/1.2426622 ↗
17. Corrosion of 9Cr steel in CO2 at intermediate temperature I: mechanism of void-induced duplex oxide formation10.1007/s11085-011-9271-5 ↗
18. Corrosion of 9Cr steel in CO2 at intermediate temperature II: mechanism of carburization10.1007/s11085-011-9272-4 ↗
19. Type 304 stainless steel vs flowing CO2 at atmospheric pressure and 1100–1800 F10.5006/0010-9312-21.3.84 ↗
20. Carburisation of ferritic Fe–Cr alloys by low carbon activity gases10.1016/j.corsci.2011.05.013 ↗
21. Mechanism of breakaway oxidation of Fe–Cr and Fe–Cr–Ni alloys in dry and wet carbon dioxide
22. Effects of cerium and manganese on corrosion of Fe–Cr and Fe–Cr–Ni alloys in Ar–20CO2 gas at 818°C10.1016/j.corsci.2013.06.046 ↗
23. Effects of cerium and manganese on corrosion of Fe–Cr and Fe–Cr–Ni alloys in Ar–20CO2 and Ar–20CO2–20H2O gases at 650°C10.1016/j.corsci.2015.08.012 ↗
24. The oxidation behaviour of the 9% Cr steel P92 in CO2-and H2O-rich gases relevant to oxyfuel environments10.3139/146.110271 ↗
25. The mechanism of corrosion of Fe-9% Cr alloys in carbon dioxide10.1007/BF00603476 ↗
26. A model for mild steel oxidation in CO210.1007/BF00610578 ↗
27. A study on the solubility and distribution of carbon in oxides10.1016/0038-1098(85)91021-X ↗
28. Kinetics of breakaway oxidation of Fe–Cr and Fe–Cr–Ni alloys in dry and wet carbon dioxide10.1016/j.corsci.2013.08.008 ↗
29. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
30. Reaktionstypen bei der Oxydation von Legierungen. Zeitschrift für Elektrochemie
31. The transition from internal to external oxidation and the formation of interruption bands in silver-indium alloys10.1016/0001-6160(61)90103-1 ↗
32. J. Takada, M.J.Joms Adachi, Determ. Diffus. Coeff. Oxyg. α-iron Intern. Oxid. Meas. Fe-Si Alloy., 21, 6, 1986, pp. 2133–2137.10.1007/BF00547959 ↗
33. Diffusion of chromium in α‐iron10.1002/pssa.2210900219 ↗
34. Young · 2016
35. Effects of silicon and water vapour on corrosion of Fe–20Cr and Fe–20Cr–20Ni alloys in CO2 at 650° C10.1007/s11085-016-9681-5 ↗
36. Effect of hydrogen chloride on corrosion behaviour of Fe–Cr alloys in wet CO2 gas at 650 °C10.1007/s11085-020-09978-3 ↗
37. Non-steady state carburisation of martensitic 9–12% Cr steels in CO2 rich gases at 550° C10.1016/j.corsci.2014.07.024 ↗
38. Thermo-Calc 2021b TCFE11: Steels/Fe-Alloys v11.0 database (accessed Septempber 2021). 2021.
39. Volume and grain boundary diffusion of 14C in α‐Fe10.1002/pssa.2211270109 ↗
40. Computer simulation of carbon diffusion and vacancy–carbon interaction in α-iron10.1016/j.actamat.2006.05.029 ↗
41. Solute diffusion in alpha- and gamma-iron10.1007/BF02642019 ↗
42. Effects of temperature variations on oxidation of iron–20% chromium alloys at 1200 K in Ar–20% O2–Cl2 gas mixtures10.1002/(SICI)1521-4176(199905)50:5<253::AID-MACO253>3.0.CO;2-C ↗
43. The role of alloying elements in commercial alloys for corrosion resistance in oxidizing‐chloridizing atmospheres. Part I: literature evaluation and thermodynamic calculations on phase stabilities10.1002/maco.200390129 ↗
44. The role of alloying elements in commercial alloys for corrosion resistance in oxidizing‐chloridizing atmospheres. Part II: experimental investigations10.1002/maco.200303673 ↗
45. The corrosion behaviour of iron in hydrogen chloride gas and gas mixtures of hydrogen chloride and oxygen at high temperatures10.1016/0010-938X(81)90023-8 ↗
46. In‐situ corrosion investigation at Masnedø CHP plant–a straw‐fired power plant10.1002/(SICI)1521-4176(199910)50:10<579::AID-MACO579>3.0.CO;2-M ↗
47. Effect of hydrogen chloride on corrosion behaviour of Fe-Cr alloys in wet CO2 gas at 650 degrees C10.1007/s11085-020-09978-3 ↗
48. Alkali induced high temperature corrosion of stainless steel: the influence of NaCl, KCl and CaCl210.1007/s11085-012-9293-7 ↗
49. High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment10.1016/S0010-938X(01)00058-0 ↗
50. Sharobem · 2017
51. Atom probe study of impurity segregation at grain boundaries in chromia scales grown in CO2 gas10.1016/j.corsci.2017.12.024 ↗
52. Penetration of protective chromia scales by carbon10.1016/j.scriptamat.2014.01.009 ↗
53. Anion transport in growing Cr2O3 scales10.4028/www.scientific.net/MSF.43.207 ↗
54. Diffusion of cations in chromia layers grown on iron-base alloys10.1007/BF00665632 ↗
55. Cation tracer diffusion in Cr2O3 and Cr2O3–0.09 wt% Y2O310.1111/j.1151-2916.1987.tb04910.x ↗
56. High-Temperature corrosion of iron at 900oC in atmospheres containing HCl and H2O10.1023/A:1010356010096 ↗
57. Modelling of the degradation of martensitic stainless steels by the Boudouard reaction10.1016/j.corsci.2020.108699 ↗
58. Effects of silicon on high temperature corrosion of Fe-Cr and Fe-Cr-Ni alloys in carbon dioxide10.1007/s11085-013-9467-y ↗
59. Corrosion behaviour of Ni-Cr alloys in wet CO2 atmosphere at 700 and 800 degrees C10.1016/j.corsci.2018.10.029 ↗