Impact of multi-factor coupling on the corrosion behavior of 254SMo stainless steel in an aggressive oilfield environment containing CO2 and H2S
Source abstract
Abstract
The passivity and corrosion behavior of 254SMo stainless steel in aggressive oilfield environments containing both carbon dioxide (CO 2 ) and hydrogen sulfide (H 2 S) were investigated using weight-loss and surface analyses. The results indicated that the corrosion rate increased with the increase in temperature, CO 2/H 2 S partial pressures, tensile stress and flow rate. Compressive stress led to a reduction in sulfide compound contents and promoted the formation of protective oxide films, while tensile stress had an opposite effect. Furthermore, a synergistic effect of stress and flow was observed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Insights into the effect of H2S on the corrosion behavior of N80 steel in supercritical CO2 environment10.1016/j.jmrt.2023.08.277 ↗
2. Hydrogen assisted cracking and CO2 corrosion behaviors of low-alloy steel with high strength used for armor layer of flexible pipe10.1016/j.apsusc.2018.01.223 ↗
3. A thermodynamic and kinetic study of the formation and evolution of corrosion product scales on 13Cr stainless steel in a geothermal environment10.1016/j.corsci.2020.108640 ↗
4. Synchrotron-based near ambient-pressure X-ray photoelectron spectroscopy and electrochemical studies of passivation behavior of N- and V-containing martensitic stainless steel10.1016/j.corsci.2023.111018 ↗
5. The development of a mechanistic-chemometrics model with multi-degree of freedom for pitting corrosion of HP-13Cr stainless steel under extremely oilfield environments10.1016/j.corsci.2021.109237 ↗
6. Investigation of the failure mechanism of the TG-201 inhibitor: Promoting the synergistic effect of HP-13Cr stainless steel during the well completion10.1016/j.corsci.2020.108448 ↗
7. Investigation of the rotation speed on corrosion behavior of HP-13Cr stainless steel in the extremely aggressive oilfield environment by using the rotating cage test10.1016/j.corsci.2018.10.011 ↗
8. Effect of the flow velocity on the corrosion behavior of UNS S41426 stainless steel in the extremely aggressive oilfield environment for the Tarim area10.5006/2813 ↗
9. Evolution and characterization of the film formed on super 13Cr stainless steel in CO2-saturated formation water at high temperature10.1016/j.corsci.2019.108277 ↗
10. Electrochemical corrosion，hydrogen permeation and stress corrosion cracking behavior of E690 steel in thiosulfate-containing artificial seawater.10.1016/j.corsci.2018.08.048 ↗
11. Influence of dissolved oxygen concentration on the oxide film formed on alloy 690 in high temperature water10.1016/j.corsci.2012.12.003 ↗
12. Stress and deformation characteristics of completion and testing tubing string with expansion joints for ultra-deep HTHP gas wells10.1016/j.ngib.2019.06.005 ↗
13. Influence of pH on the passivation behavior of 254SMo stainless steel in 3.5% NaCl solution10.1016/j.corsci.2006.10.032 ↗
14. Understanding the passivation behavior and film chemistry of four corrosion-resistant alloys in the simulated flue gas condensates
15. Characterization of the passive properties of 254SMo stainless steel in simulated desulfurized flue gas condensates by electrochemical analysis, XPS and ToF-SIMS10.1016/j.corsci.2019.108405 ↗
16. Pitting and crevice corrosion of superaustenitic stainless steels10.1002/maco.200303746 ↗
17. The transpassive dissolution mechanism of highly alloyed stainless steels: I. Experimental results and modelling procedure10.1016/S0010-938X(02)00073-2 ↗
18. Full depth profile of passive films on 316L stainless steel based on high resolution HAXPES in combination with ARXPS10.1016/j.apsusc.2012.02.099 ↗
19. Electrochemical behaviour of 254SMo stainless steel in comparison with 316L stainless steel and Hastelloy C276 in HCl media10.1179/000705900101501371 ↗
20. Role of alloyed molybdenum on corrosion resistance of austenitic Ni-Cr-Mo-Fe alloys in H2S-Cl- environments10.1016/j.corsci.2015.05.053 ↗
21. Role of alloyed copper on corrosion resistance of austenitic stainless steel in H2S-Cl- environment10.1016/j.corsci.2013.12.013 ↗
22. The surface characterization and passive behavior of Type 316L stainless steel in H2S-containing conditions10.1016/j.apsusc.2017.06.214 ↗
23. A direct measurement of wall shear stress in multiphase flow—Is it an important parameter in CO2 corrosion of carbon steel pipelines？Corros.
24. Effects of flow velocity on the corrosion behaviour of super 13Cr stainless steel in ultra-HTHP CO2-H2S coexistence environment10.1016/j.corsci.2022.110235 ↗
25. The development of a mechanistic-chemometrics model with multi-degree of freedom for pitting corrosion of HP-13Cr stainless steel under extremely oilfield environments10.1016/j.corsci.2021.109237 ↗
26. Investigation of the failure mechanism of the TG-201 inhibitor: Promoting the synergistic effect of HP-13Cr stainless steel during the well completion10.1016/j.corsci.2020.108448 ↗
27. ASTM · 2003
28. Insights into the effect of H2S on the corrosion behavior of N80 steel in supercritical CO2 environment10.1016/j.jmrt.2023.08.277 ↗
29. Investigation of the rotation speed on corrosion behavior of HP-13Crstainless steel in the extremely aggressive oilfield environment by using the rotating cage test10.1016/j.corsci.2018.10.011 ↗
30. Bridge for the thermodynamics and kinetics of electrochemical corrosion: Modeling on dissolution, ionization, diffusion and deposition in metal/solution interface10.1016/j.corsci.2021.109763 ↗
31. Bridge for the thermodynamics and kinetics of electrochemical corrosion: Designing of the high corrosion-resistant magnesium alloy10.1016/j.corsci.2023.111428 ↗
32. An investigation on the continuous and uniform thin membrane passive film formed on sputtered nanocrystalline stainless steel10.1016/j.corsci.2015.11.031 ↗
33. Why CoCrFeMnNi HEA could not passivate in chloride solution? - A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying10.1016/j.corsci.2022.110396 ↗
34. Sn microalloying enhances corrosion resistance of stainless steel by accelerating heterogeneous nucleation of passive film10.1016/j.corsci.2022.110279 ↗
35. Bridge for the thermodynamics and kinetics of electrochemical corrosion: designing a corrosion-resistant HP-13Cr stainless steel by Cu alloying for use in an H2S-containing geothermal environment10.1016/j.corsci.2023.111784 ↗
36. Effect of alloying ratios and Cu-addition on corrosion behaviour of CoCrFeNiMo high-entropy alloys in superheated steam containing CO2, H2S and HCl10.1016/j.corsci.2020.109083 ↗
37. Temperature change induce crack mode transition of 316L stainless steel in H2S environment revealed by dislocation configuration10.1016/j.corsci.2021.109896 ↗
38. Stability of passive film and pitting susceptibility of 2205 duplex stainless steel in CO2/H2S-containing geothermal environment10.1016/j.corsci.2022.110832 ↗
39. Effect of flow velocity on the corrosion behavior of super 13Cr stainless steel in ultra-HTHP CO2-H2S coexistence environment10.1016/j.corsci.2022.110235 ↗
40. Corrosion of low alloy steel and stainless steel in supercritical CO2/H2O/H2S systems10.1016/j.corsci.2016.06.003 ↗
41. Effect of H2S on corrosion in polluted waters: a review10.1179/174327806X132204 ↗
42. The effect of H2S concentration on the corrosion behavior of carbon steel at 90°C10.1016/j.corsci.2010.02.004 ↗
43. Hydrogen embrittlement susceptibility of Ti-6Al-4V alloys fabricated by electron beam melting in simulated deep-sea environment10.5006/4280 ↗
44. Stress corrosion cracking of 1Cr17Ni2 countersunk screw during the COVID-19 epidemic prevention
45. Effect of pulsed current cathodic protection on pipeline steel API 5L X65 corrosion mitigation: an investigation and machine learning-assisted modeling10.1016/j.corcom.2023.01.005 ↗
46. Influence of a small velocity variation on the evolution of the corrosion products and corrosion behaviour of super 13Cr SS in a geothermal CO2 containing environment10.1016/j.corsci.2020.108983 ↗
47. Effects of alternating current on microbiologically synergistic corrosion of pipeline steel X80 applied by elastic stress10.1016/j.corcom.2023.08.001 ↗
48. Understanding the non-steady electrochemical mechanism on SCC of 304 SS under applied polarization potentials10.1016/j.corsci.2023.111686 ↗
49. Comparison of the characteristics of corrosion scales covering 3Cr steel and X60 steel in CO2-H2S coexistence environment.10.1016/j.jngse.2020.103371 ↗