Effects of surface finishes, heat treatments and printing orientations on stress corrosion cracking behavior of laser powder bed fusion 316L stainless steel in high-temperature water
Source abstract
Abstract
Stress corrosion cracking (SCC) of laser powder bed fusion 316 L stainless steel in oxygenated high-temperature water environments with chloride addition at 288 °C was studied. The influences of surface finishes (as-built, mechanically polished, Hirtisation® and shot peened), heat treatments (solution annealing at 1066 and 1150 °C and hot isostatic pressing) and the printing orientations on SCC were evaluated. Hirtisation resulted in a lower SCC susceptibility than as-built or polished surface while shot peening showed the lowest apparent SCC resistance. A high annealing temperature decreases SCC resistance. The effect of printing orientation is material and environment dependent.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Efficient additive manufacturing production of oxide- and nitride-dispersion-strengthened materials through atmospheric reactions in liquid metal deposition10.1016/j.matdes.2016.08.084 ↗
2. The origin of high-density dislocations in additively manufactured metals10.1080/21663831.2020.1751739 ↗
3. About metastable cellular structure in additively manufactured austenitic stainless steels
4. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
5. Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel10.1007/s11665-013-0784-8 ↗
6. Selective laser melting of stainless steel 316L with low porosity and high build rates10.1016/j.matdes.2016.05.035 ↗
7. Roadmap for Regulatory Acceptance of Advanced Manufacturing Methods in the Nuclear Energy Industry, Nuclear Energy Institute, 2019.
8. Westinghouse, Westinghouse Creates and Installs Industry’s First 3D-Printed Fuel Debris Filter for Nuclear Power Plants, November 2022. [Online]. 〈https://info.westinghousenuclear.com/news/westinghouse-creates-and-installs-industrys-first-3d-printed-fuel-debris-filter-for-nuclear-power-plants〉.
9. A review of stress corrosion cracking of austenitic stainless steels in PWR primary water
10. Advanced Manufacturing of Nuclear Components, Report No. 2022/004, World Nuclear Association, 2022.
11. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L10.1016/j.jallcom.2018.01.098 ↗
12. Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting
13. Numerical Analysis of Molten Pool Behavior and Spatter Formation with Evaporation During Selective Laser Melting of 316L Stainless Steel10.1007/s11663-019-01641-w ↗
14. Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels10.1016/j.ijplas.2019.05.009 ↗
15. Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting10.1016/j.msea.2018.01.103 ↗
16. R. Belles, W. Poore, T. Harrison, M. Muhlheim and T. Muth, A Survey of Additive Manufacturing Capabilities, ORNL/TM-2018/1013, 2018.10.2172/1484113 ↗
17. Cross-testing laser powder bed fusion production machines and powders: Variability in mechanical properties of heat-treated 316L stainless steel
18. Localised electrochemical processes on laser powder bed fused 316 stainless steel with various heat treatments in high-temperature water
19. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
20. Corrosion fatigue crack growth of laser additively-manufactured 316L stainless steel in high temperature water10.1016/j.corsci.2017.08.023 ↗
21. Mechanical anisotropy of additively manufactured stainless steel 316L: an experimental and numerical study
22. R. Rebak and X. Lou, Environmental Cracking and Irradiation Resistant Stainless Steels by Additive Manufacturing, doi: 10.2172/1431212., United States, 2018.10.2172/1431212 ↗
23. Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion, ASTM F3184, Annual Book of ASTM Standards, West Conshohocken, PA 19428-2959, United States, 2016.
24. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion
25. Investigation of the strengthening mechanism in 316L stainless steel produced with laser powder bed fusion
26. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting10.1016/j.msea.2019.01.110 ↗
27. Anisotropy in the microstructure and mechanical property for the bulk and porous 316L stainless steel fabricated via selective laser melting10.1016/j.matlet.2018.09.152 ↗
28. Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
29. On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatments
30. Corrosion performance of additively manufactured stainless steel parts: a review
31. On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing10.1016/j.corsci.2017.09.017 ↗
32. Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels10.1016/j.jnucmat.2018.10.044 ↗
33. TEM investigations of the oxide layers formed on a 316L alloy in simulated PWR environment10.1007/s10853-012-6975-0 ↗
34. Effects of surface treatments on environmentally-assisted cracking susceptibility of Alloy 182 in BWR environment
35. Stress corrosion cracking initiation susceptibility of alloy 182 with different surface treatments
36. Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: a comparative study bringing insights into the impact of microstructure on their passivity
37. EIS comparative study and critical Equivalent Electrical Circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel
38. Additively manufactured 316L stainless steel with improved corrosion resistance and biological response for biomedical applications
39. The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid10.1016/j.apsusc.2018.10.150 ↗
40. Stress corrosion cracking of 316L manufactured by laser powder bed fusion in 6% ferric chloride solution
41. SCC behaviour of laser powder bed fused 316L stainless steel in high-temperature water at 288
42. Surface Treatment of 3D-Printed Metal Parts, RENA Technologies, 2024. [Online]. 〈https://www.rena.com/en/technology/process-technology/hirtisation〉.
43. Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens, ASTM G30 - 97 (Reapproved 2016), 2016.
44. Effect of chloride and oxygen on stress corrosion cracking of stainless steels: review of literature
45. Corrosion pitting and environmentally assisted small crack growth10.1098/rspa.2014.0254 ↗
46. O. Chopra, W. Soppet and W. Shack, Effects of Alloy Chemistry, Cold Work, and Water Chemistry on Corrosion Fatigue and Stress Corrosion Cracking of Nickel Alloys and Welds, NUREG/CR-6721, ANL-01/07, Argonne National Laboratory, Argonne, IL, USA, 2001.10.2172/925005 ↗
47. High temperature oxidation behavior of AISI 304L stainless steel - Effect of surface working operations10.1016/j.apsusc.2012.10.018 ↗
48. Effects of dissolved hydrogen and surface condition on theintergranular stress corrosion cracking initiation and short crackgrowth behavior of non-sensitized 316 stainless steel in simulated PWR primary water10.1016/j.corsci.2017.02.003 ↗
49. Effects of laser shock peening on SCC behavior of Alloy 600 in tetrathionate solution10.1016/j.corsci.2014.10.045 ↗
50. MRP-267, Revision 1: Materials Reliability Program: Technical Basis for Primary Water Stress Corrosion Cracking Mitigation by Surface Stress Improvement, EPRI Report, 2012.
51. Mechanistic understanding of the localized corrosion behavior of laser powder bed fused 316L stainless steel in pressurized water reactor primary water
52. Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment10.1016/j.msea.2019.04.111 ↗
53. Effect of hydrogen on electrochemical behavior of additively manufactured 316L in pressurized water reactor primary water
54. Corrosion of 316L stainless steel produced by laser powder bed fusion and powder metallurgy in pressurized water reactor primary coolant10.1016/j.mtla.2024.102055 ↗
55. Microstructural investigation of the effect of hot-isostatic-pressing treatment on a laser powder bed fused type 316L stainless steel
56. Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing
57. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering10.1016/S1359-6454(02)00064-2 ↗
58. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting10.1149/2.0551706jes ↗
59. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel10.1016/j.scriptamat.2017.07.037 ↗