Hydrogen-assisted fatigue crack propagation behavior of selective laser–melted Inconel 718 alloy
Source abstract
Abstract
Hydrogen-assisted fatigue crack propagation behavior of selective laser melted Inconel 718 alloy was investigated under in situ electrochemical hydrogen charging, and by multi-scale microstructural analysis. Results suggest that hydrogen significantly increases the fatigue crack growth rate (FCGR), and such an effect is intensified for the post-heat-treatment sample by an acceleration of 2.8 times. Rapid hydrogen diffusion along grain boundaries, and planar-dislocation-slip-induced local hydrogen concentration induced abundant of intergranular cracking, and a decrease of deformation expansion. The suppressed dislocation emission and mobility by hydrogen significantly confine the plastic deformation ahead of the crack tip, thus accelerated the FCGR in the presence of hydrogen.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Alloy 718 for oilfield applications10.1007/s11837-012-0238-z ↗
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
3. Study of the effect of hydrogen charging on the tensile properties and microstructure of four variant heat treatments of nickel alloy 71810.1016/j.ijhydene.2017.02.149 ↗
4. Heat treatment of Alloy 718 made by additive manufacturing for oil and gas applications10.1007/s11837-018-03321-7 ↗
5. Hierarchically heterogeneous microstructure enables ultrahigh-strength and good ductility in selective laser melted eutectic high-entropy alloys10.1016/j.jmrt.2023.03.224 ↗
6. A process parameters review on selective laser melting-based additive manufacturing of single and multi-material: microstructure, physical properties, tribological, and surface roughness
7. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: Influence of orientation and temperature10.1016/j.ijfatigue.2020.105739 ↗
8. Comparative study on the microstructure evolution of selective laser melted and wrought IN718 superalloy during subsequent heat treatment process and its effect on mechanical properties10.1016/j.msea.2020.139735 ↗
9. The effect of subsequent heat treatment on the evolution behavior of second phase particles and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting10.1016/j.msea.2020.139931 ↗
10. Microstructural evolution and corrosion behaviors of Inconel 718 alloy produced by selective laser melting following different heat treatments
11. Effect of electrochemical charging on the hydrogen embrittlement susceptibility of alloy 71810.1016/j.actamat.2019.08.020 ↗
12. Hydrogen embrittlement of 718 under cathodic polarization10.1016/j.corsci.2019.108361 ↗
13. Pronounced transition of crack initiation and propagation modes in the hydrogen-related failure of a Ni-based superalloy 718 under internal and external hydrogen conditions10.1016/j.corsci.2019.108186 ↗
14. Hydrogen-assisted failure of laser melting additive manufactured IN718 superalloy10.1016/j.corsci.2019.108171 ↗
15. Defect tolerance and hydrogen susceptibility of the fatigue limit of an additively manufactured Ni-based superalloy 71810.1016/j.ijfatigue.2020.105740 ↗
16. Investigation of hydrogen embrittlement properties of Ni-based alloy 718 fabricated via laser powder bed fusion10.1016/j.ijhydene.2022.04.045 ↗
17. Hydrogen-assisted failure in Inconel 718 fabricated by laser powder bed fusion: The role of solidification substructure in the embrittlement10.1016/j.scriptamat.2021.114308 ↗
18. Hydrogen embrittlement behavior of selective laser-melted Inconel 718 alloy10.1016/j.jmrt.2022.12.196 ↗
19. Effects of hydrogen and load frequency on the fatigue crack propagation behavior of selective laser melted Inconel 718 alloy10.1016/j.ijfatigue.2022.106848 ↗
20. Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments10.1016/j.msea.2017.12.043 ↗
21. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
22. About metastable cellular structure in additively manufactured austenitic stainless steels
23. Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment10.1016/j.jmapro.2019.02.029 ↗
24. Microstructure characteristics and mechanical behaviour of a selective laser melted Inconel 718 alloy10.1016/j.jmrt.2019.12.075 ↗
25. Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 71810.1016/j.matchar.2019.01.018 ↗
26. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing10.1016/j.matdes.2017.03.004 ↗
27. Hydrogen-assisted fatigue crack-propagation in a Ni-based superalloy 718, revealed via crack-path crystallography and deformation microstructures10.1016/j.corsci.2020.108814 ↗
28. Interpretation of hydrogen-assisted fatigue crack propagation in BCC iron based on dislocation structure evolution around the crack wake10.1016/j.actamat.2018.06.041 ↗
29. Hydrogen-affected fatigue crack propagation at various loading frequencies and gaseous hydrogen pressures in commercially pure iron10.1016/j.ijfatigue.2018.12.009 ↗
30. Recent Advances on High-Entropy Alloys for 3D Printing10.1002/adma.201903855 ↗
31. Grain Structure Control of Additively Manufactured Metallic Materials10.3390/ma10111260 ↗
32. Single-crystal laser deposition of superalloys: processing–microstructure maps10.1016/S1359-6454(00)00367-0 ↗
33. A promising new class of high-temperature alloys: Eutectic high-entropy alloys10.1038/srep06200 ↗
34. Additive manufactured high entropy alloys: A review of the microstructure and properties10.1016/j.matdes.2022.110875 ↗
35. Effect of TaC on microstructure and mechanical properties of 316L stainless steel by selective laser melting10.1016/j.matchar.2023.112990 ↗
36. Hot deformation and microstructure evolution of selective laser melted 718 alloy pre-precipitated with δ phase10.1016/j.msea.2022.143633 ↗
37. Improving the hydrogen embrittlement resistance of a selective laser melted high-entropy alloy via modifying the cellular structures10.1016/j.corsci.2021.109695 ↗
38. Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting10.1016/j.msea.2019.01.109 ↗
39. Evolution of Relationships Between Dislocation Microstructures and Internal Stresses of AISI 316L During Cyclic Loading at 293 K and 573 K (20 °C and 300 °C)10.1007/s11661-013-1981-7 ↗
40. Statistical analysis of dislocations and dislocation boundaries from EBSD data10.1016/j.ultramic.2017.04.005 ↗
41. Fine subgrain structure adjacent to fatigue cracks10.1016/0001-6160(72)90008-9 ↗
42. Recent Advances on High-Entropy Alloys for 3D Printing10.1002/adma.201903855 ↗
43. Influence of gaseous hydrogen on plastic strain in vicinity of fatigue crack tip in Armco pure iron10.1051/matecconf/201816503006 ↗
44. Dislocation dynamics analysis of hydrogen embrittlement in alpha iron based on atomistic investigations
45. Atomistic study of the competitive relationship between edge dislocation motion and hydrogen diffusion in alpha iron10.1557/jmr.2011.106 ↗
46. Atomic mechanism and prediction of hydrogen embrittlement in iron10.1038/nmat3479 ↗
47. In situ electrochemical microcantilever bending test: A new insight into hydrogen enhanced cracking10.1016/j.scriptamat.2017.01.019 ↗
48. Hydrogenated vacancies lock dislocations in aluminium10.1038/ncomms13341 ↗
49. Equilibrium aspects of hydrogen-induced cracking of steels10.1016/0001-6160(74)90061-3 ↗
50. Testing of the decohesion theory of hydrogen-induced crack propagation10.1016/0036-9748(72)90126-3 ↗
51. Hydrogen-induced intergranular fracture of steels10.1016/S0013-7944(00)00124-7 ↗
52. Hydrogen permeation behavior in IN718 and GH761 superalloys10.1007/BF02651595 ↗
53. Gaseous hydrogen embrittlement of a Ni-free austenitic stainless steel containing 1 mass% nitrogen: Effects of nitrogen-enhanced dislocation planarity10.1016/j.ijhydene.2020.02.014 ↗
54. Twinning behavior and hydrogen embrittlement of a pre-strained twinning-induced plasticity (TWIP) steel10.1016/j.corsci.2021.109791 ↗
55. Effect of manganese content on the hydrogen embrittlement of twinning-induced plasticity (TWIP) steels under hydrogen charging and hydrogen environment10.1016/j.msea.2022.144289 ↗
56. Contribution of triple junctions to the diffusion anomaly in nanocrystalline materials10.1016/j.scriptamat.2007.03.057 ↗
57. Accelerated diffusion of hydrogen along grain boundaries in nickel10.1016/1359-6454(95)00446-7 ↗
58. First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel10.1016/j.actamat.2015.07.031 ↗
59. Hydrogen diffusion in ultrafine-grained palladium: Roles of dislocations and grain boundaries10.1016/j.actamat.2016.01.069 ↗
60. Effects of interstitial C and N on hydrogen embrittlement behavior of non-equiatomic metastable FeMnCoCr high-entropy alloys10.1016/j.corsci.2021.109933 ↗
61. A new mechanism in hydrogen-enhanced fatigue crack growth behavior of a 1900-MPa-class high-strength steel10.1007/s10704-012-9760-9 ↗