journal article·2021-07

High-temperature oxidation behaviour of refurbished (Ni,Pt)Al coating on Ni-based superalloy at 1100 °C

C.Y. Zhang, Z. Ma, S.Z. Dong, M.M. Xu, S. Li, C. Zhang, C.Y. Jiang, Z.B. Bao, S.L. Zhu, F.H. Wang

Corrosion Science· Volume 187
Publisher page

Abstract

Abstract A single-phase (Ni,Pt)Al coating was removed by soft chemical stripping method successfully after preceding oxidation at 1100 °C for 300 h, and a fresh one was refurbished subsequently. Oxidation behaviour of the refurbished (Ni,Pt)Al coating was studied in comparison with the virgin one at 1100 °C. The results show that the refurbished coating exhibited superior isothermal and cyclic oxidation resistance than the virgin one in terms of oxidation rate and surface rumpling. The effects of surface roughness and residual elements in the refurbished coating on oxidation rate, surface rumpling and interdiffusion behaviour were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Microstructural evolution of Pt-aluminide coating influenced by cycle oxidation service conditions10.1016/j.engfailanal.2012.10.012 ↗
2. Microstructure of Pt modified aluminide coatings on Ni-based superalloys without prior Pt diffusion10.1016/j.surfcoat.2004.04.094 ↗
3. Effect of platinum and pre-oxidation on the hot corrosion behavior of aluminide coating with NaCl at 1050 °C10.1088/2053-1591/abc4b2 ↗
4. Hot corrosion behaviour of single-phase platinum-modified aluminide coatings: effect of Pt content and pre-oxidation10.1016/j.corsci.2017.08.015 ↗
5. Thermal cycling behavior of EB-PVD TBCs on CVD platinum modified aluminide coatings10.1016/j.jallcom.2015.02.177 ↗
6. Effect of Hf addition in (Ni,Pt)Al bond coat on thermal cycling behavior of a thermal barrier coating system at 1100 °C10.1016/j.corsci.2019.108424 ↗
7. Effect of Pt and Al content on the long-term, high temperature oxidation behavior and interdiffusion of a Pt-modified aluminide coating deposited on Ni-base superalloys10.1016/j.surfcoat.2006.07.246 ↗
8. Microstructures and cyclic oxidation behaviour of Pt-free and low-Pt NiAl coatings on the Ni-base superalloy Rene-8010.1016/j.corsci.2011.10.037 ↗
9. Mechanical properties of thin surface layers affected by material removal processes10.1016/S0257-8972(01)01404-9 ↗
10. A. Scrivani, C. Giolli, B.A. Allegrini, Antonio, Method and equipment for removal of ceramic coatings by solid CO2 blasting, in, CN.
11. Removal of coatings from polymer substrates by solid particle blasting to enhance reuse or recycling10.1016/j.wear.2006.11.032 ↗
12. Controlled stripping of aluminide coatings on nickel superalloys through electrolytic techniques10.1007/s10800-008-9516-4 ↗
13. Dissolution and passivation of aluminide coatings on model and Ni-based superalloy10.1016/j.surfcoat.2018.10.090 ↗
14. Influence of the oxide scale features on the electrochemical descaling and stripping of aluminide coatings10.1016/j.surfcoat.2016.03.019 ↗
15. Oxidation performance of repaired aluminide coatings on austenitic steel substrates10.1016/j.surfcoat.2017.07.059 ↗
16. Refurbishment of thermally degraded diffusion Pt-aluminide (PtAl) bond coat on a Ni-base superalloy10.1016/j.surfcoat.2018.09.023 ↗
17. Soft chemical stripping of aluminide coatings and oxide products on Ni superalloys10.1016/j.surfcoat.2007.11.013 ↗
18. Chemical stripping methods for the removal of NiCrAlY thermal spray coatings
19. High temperature oxidation and interdiffusion behavior of recoated NiCoCrAlY coating on a nickel-based superalloy10.1016/j.corsci.2020.108894 ↗
20. Preparation and enhanced oxidation performance of a Hf-doped single-phase Pt-modified aluminide coating10.1016/j.corsci.2016.09.014 ↗
21. Co-doping effect of Hf and Y on improving cyclic oxidation behavior of (Ni,Pt)Al coating at 1150 °C10.1016/j.corsci.2020.109093 ↗
22. Transient-alumina transformations during the oxidation of magnetron-sputtered CoCrAl nanocrystalline coatings10.1023/A:1026015101783 ↗
23. Microstructural study of the theta-alpha transformation in alumina scales formed on nickel-aluminides10.1179/mht.2000.011 ↗
24. The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys10.1016/0010-938X(92)90002-K ↗
25. Energetics of formation of lamellar porous microstructures in γ-Al2O310.1007/BF00550379 ↗
26. Nucleation of alpha alumina in boehmite gel10.1557/JMR.1990.0278 ↗
27. Gitzen · 1970
28. Benefits of Zr addition to oxidation resistance of a single-phase (Ni,Pt)Al coating at 1373 K10.1016/j.jmst.2019.03.013 ↗
29. Influence of surface roughness on the oxidation behavior of a Ni-4.0Cr-5.7Al single crystal superalloy10.1016/j.apsusc.2018.01.226 ↗
30. Effect of surface roughness on early stage oxidation behavior of Ni-base superalloy IN 625
31. Microstructure of oxide scales on aluminide diffusion coatings after short time oxidation at 1050 °C10.1016/j.surfcoat.2003.09.002 ↗
32. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
33. 18O/SIMS characterization of the growth mechanism of doped and undoped α-Al2O310.1007/BF00665610 ↗
34. Characterization of alumina scales formed during isothermal and cyclic oxidation of plasma-sprayed TBC systems at 1150°C10.1023/A:1018870923397 ↗
35. Cyclic oxidation and rumpling behaviour of single phase β-(Ni,Pt)Al coatings with different thickness of initial Pt plating10.1016/j.corsci.2016.05.011 ↗
36. Improved Cr2O3 adhesion by Ce ion implantation in the presence of interfacial sulfur segregation10.1016/j.actamat.2006.07.047 ↗
37. Deformation and phase transformations during the cyclic oxidation of Ni-Al and Ni-Pt-Al10.1007/s11837-006-0068-y ↗
38. Role and behaviour of mu phase during deformation of a nickel-based single crystal superalloy10.1016/S0921-5093(98)00766-7 ↗
39. Secondary reaction zone formations in Pt-aluminised fourth generation Ni-base single crystal superalloys10.4028/www.scientific.net/AMR.278.78 ↗
40. Characterization of topologically close-packed phases in secondary reaction zone in a coated CMSX-4 single crystal Ni-based superalloy10.1007/s10853-012-6840-1 ↗