Response of NiCrAl-bentonite abradable seal coatings to thermal/salt corrosion
Source abstract
Abstract
The growing need for engine services in marine environments has resulted in increasing salt and coupled corrosion of abradable seal coatings (ASCs). In this study, the response of NiCrAl-bentonite ASCs to thermal/salt corrosion was assessed. The results indicated that NiCrAl-bentonite ASCs could provide excellent protection for TC4 alloys in marine environments. NiCrAl-bentonite ASCs retained their low hardness and high strength and exhibited good abradability in chloride-rich environments. Compared with the Al-, Ni-, and YSZ-based coatings, the proposed coating demonstrated improved synergy between strength and hardness/abradability. This research provides valuable insights into the reliable use of NiCrAl-bentonite ASCs in marine environments.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Oxidation and hot corrosion behavior of NiCrAlYSi+NiAl/cBN abrasive coating10.1016/j.corsci.2020.108486 ↗
2. Mouritz · 2012
3. Combustion behavior and mechanism of Ti-25V–15Cr compared to Ti-6Al-4V alloy10.1016/j.corsci.2021.109957 ↗
4. Combustion behaviour and mechanism of TC4 and TC11 alloys10.1016/j.corsci.2020.108564 ↗
5. Combustion behavior and mechanisms of Ti2AlNb compared to an α + β Ti alloy10.1016/j.corsci.2021.109868 ↗
6. S. Wilson, Thermally sprayed abradable coating technology for sealing in gas turbines, 6th International Conference on the Future of Gas Turbine Technology, 2012.
7. Corrosion behaviour of NiCrFeAl-hBN seal coatings in oxidation environments at a high temperature10.1007/s12598-020-01480-8 ↗
8. Self-lubricating epoxy-based composite abradable seal coating eliminating adhesive transfer via hierarchical design10.1016/j.jmst.2021.07.017 ↗
9. High temperature abradable sealing coating for SiCf/SiC ceramic matrix composites10.1016/j.ceramint.2022.09.141 ↗
10. Design and characterization of BSAS-polyester abradable environmental barrier coatings (A/EBCs) on SiC/SiC composites10.1016/j.surfcoat.2023.129617 ↗
11. Fabrication and characterization of Yb2Si2O7-based composites as novel abradable sealing coatings10.1016/j.ceramint.2021.05.029 ↗
12. Experimental Investigation of the mechanical behavior of an AlSi-PE abradable coating at high strain rates for a large range of temperatures10.1007/s40870-020-00242-y ↗
13. Mechanical characterisation of AlSi-hBN, NiCrAl-Bentonite, and NiCrAl-Bentonite-hBN freestanding abradable coatings10.1016/j.surfcoat.2010.11.044 ↗
14. A study on YSZ abradable seal coatings prepared by atmospheric plasma spray and mixed solution precursor plasma spray10.1007/s11666-021-01178-y ↗
15. Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying10.1016/j.surfcoat.2020.126045 ↗
16. Fabrication and characterization of 8YSZ ceramic based abradable seal coatings by atmospheric plasma spraying10.1016/j.ceramint.2020.07.119 ↗
17. Tribological performance and phase transition of MAX-phase/YSZ abradable seal coating produced by air plasma spraying10.1016/j.ceramint.2021.10.210 ↗
18. Corrosion mechanism of an Al-BN abradable seal coating system in chloride solution10.1016/j.corsci.2013.11.007 ↗
19. Galvanic corrosion performance of an Al–BN abradable seal coating system in chloride solution10.3390/coatings11010009 ↗
20. Effect of the corrosion of seal coatings used in aero engines on their high-speed wear behaviour10.1007/s11666-020-01116-4 ↗
21. An abradable and anti-corrosive CuAl-Ni/C seal coating for aero-engine10.1016/j.cej.2023.145665 ↗
22. Corrosion mechanism of CuAl-NiC abradable seal coating system—the influence of porosity, multiphase, and multilayer structure on the corrosion failure10.1016/j.jmst.2021.01.068 ↗
23. Corrosion behavior of an abradable seal coating system10.1007/s11666-014-0115-0 ↗
24. Study on salt spray corrosion of Ni–graphite abradable coating with 80Ni20Al and 96NiCr–4Al as bonding layers10.1016/j.surfcoat.2011.03.007 ↗
25. The effect of Al content on the galvanic corrosion behaviour of coupled Ni/graphite and Ni-Al coatings10.1016/j.corsci.2011.02.019 ↗
26. Improvement of thermally sprayed abradable coating by microstructure control10.1016/j.surfcoat.2006.03.047 ↗
27. Wear mechanisms at the blade tip seal interface10.1016/j.wear.2018.03.009 ↗
28. Thermal shock failure behavior of TiZrNiCuBe metallic glass/NiCrAl-bentonite abradable flame-retardant composite coatings10.1007/s11666-021-01273-0 ↗
29. Enhanced mechanical, electrochemical, and passive performance of laser-clad NiCrAl coating by laser remelting10.1007/s11665-021-06027-1 ↗
30. The iron effect on hot corrosion behaviour of MCrAlX coating in the presence of NaCl at 900 ℃10.1016/j.jallcom.2019.152381 ↗
31. Hot corrosion properties of composite coatings in the presence of NaCl at 700 and 900 °C10.1016/j.corsci.2013.01.004 ↗
32. High temperature corrosion behavior of Ni and Co base HVOF coatings exposed to NaCl-KCl salt mixture10.1016/j.surfcoat.2021.127277 ↗
33. Efficient prediction of corrosion behavior in ternary Ni-based alloy systems: Theoretical calculations and experimental verification10.1016/j.jmst.2023.05.042 ↗
34. Improving fire retardancy of Ti alloys with a refractory ceramic barrier layer10.1016/j.corcom.2023.02.002 ↗
35. Critical firing conditions for titanium alloys by molten droplet ignition10.1016/j.corcom.2022.10.003 ↗
36. Lightweight epoxy-based abradable seal coating with high bonding strength10.1016/j.jmst.2020.05.077 ↗
37. Improving erosion resistance of plasma-sprayed ceramic coatings by elevating the deposition temperature based on the critical bonding temperature10.1007/s11666-017-0633-7 ↗
38. Erosion wear behaviour and model of abradable seal coating10.1016/S0043-1648(01)00681-0 ↗
39. Tribological characterization of plasma-sprayed CoNiCrAlY-BN abradable coatings10.1007/s11666-013-9998-4 ↗
40. Abradable coatings for small turboprop engines: a case study of nickel-graphite coating10.1007/s11666-019-00838-4 ↗
41. Preparation and performance of an abradable NiCrFeAlBN-YSZ-NiCrAl layered seal coating for aircraft engines10.1007/s11666-020-01082-x ↗
42. Thermochemical stability of Yb2Si2O7 environmental barrier coatings during thermal cycling and water vapor corrosion at 1350° C10.1007/s11666-023-01603-4 ↗
43. Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray10.1016/j.corsci.2018.04.018 ↗
44. Birks · 2006
45. Critical scale grain size for optimal lifetime of TBCs10.1016/j.jmst.2021.12.007 ↗
46. Improving the oxidation resistance of Si coatings by isolated-particle healing10.1016/j.corcom.2022.03.006 ↗
47. Suppressing the phase-transition-induced cracking of SiO2 TGOs by lattice solid solution10.1016/j.jeurceramsoc.2023.01.042 ↗
48. High temperature oxidation and tribological behaviors of NiCrAl-graphite self-lubricating composites10.1007/s40195-020-01188-9 ↗
49. Hot corrosion properties of composite coatings in the presence of NaCl at 700 and 900 ℃10.1016/j.corsci.2013.01.004 ↗
50. High speed rub wear mechanism in IN-718 vs. NiCrAl–bentonite10.1016/j.surfcoat.2007.05.054 ↗
51. Investigation of abradable seal coating performance using scratch testing10.1016/j.surfcoat.2007.07.076 ↗
52. Excellently abradable seal coating with spherical closed-pore for next-generation aero-engine application10.1016/j.matlet.2021.131024 ↗
53. Corrosion resistance of Ti3Al/BN abradable seal coating10.1007/s40195-014-0133-4 ↗
54. Effect of scanning speeds on electrochemical corrosion resistance of laser cladding TC4 alloy10.1088/1674-1056/28/2/026802 ↗
55. Effect of pre-oxidation on the electrochemical corrosion behavior of Ni-based coating reinforced by ceramic particles10.1016/j.ceramint.2023.02.178 ↗
56. Investigating the anisotropic mechanical properties of plasma sprayed yttria-stabilised zirconia coatings10.1016/j.surfcoat.2014.10.031 ↗
57. Effects of blade material characteristics on the high-speed rubbing behavior between Al-hBN abradable seal coatings and blades10.1016/j.wear.2018.06.003 ↗
58. TGO growth and kinetic study of single and double layered TBC systems10.1016/j.surfcoat.2021.127135 ↗
59. Oxidation and hot corrosion resistance of HVOF/EB-PVD thermal barrier coating system10.1016/j.surfcoat.2021.126862 ↗
60. Oxidation behaviour of a CoNiCrAlY/h-BN based abradable coating10.1016/j.corsci.2019.02.030 ↗
61. Improved high-temperature oxidation resistance of TC4 alloy by electrodeposited SiO2 coating10.1016/j.corcom.2021.10.002 ↗
62. Ni coatings for corrosion protection of Mg alloys prepared by an in-situ micro-forging assisted cold spray: Effect of powder feedstock characteristics10.1016/j.corsci.2021.109397 ↗
63. Effects of Ni addition on corrosion behaviors of laser cladded FeSiBNi coating in 3.5% NaCl solution10.1016/j.jallcom.2019.05.012 ↗
64. Popov · 2015
65. Investigation of oxidation and hot corrosion behavior of molybdenum coatings produced by high-velocity oxy-fuel coating method10.1016/j.surfcoat.2022.128641 ↗
66. Design of novel NiSiAlY alloys in marine salt-spray environment: Part II. Al-Ni-Si-Y thermodynamic dataset10.1016/j.jmst.2021.01.088 ↗