Chlorine-induced high-temperature corrosion of the Pt-modified aluminide coating in simulated marine environment
Source abstract
Abstract
The corrosion behavior of a single phase Pt-modified aluminide coating in the marine environment was investigated through a novel cyclically alternate corrosion test. The results showed that the multilayer oxide scale with loose structure was formed on the coating. NaCl and water vapor were verified to play important roles in enhancing the aggressivity during the corrosion test, in which the presence of NaCl increased cracking and spallation tendency of the oxide scale, and the addition of water vapor accelerated the oxidation rate and promoted internal oxidation to the coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. High-temperature oxidation and hot corrosion of Ni-based single crystal superalloy in the incubation stage10.1016/j.corsci.2023.111026 ↗
2. High temperature corrosion mechanism of Ni–W–6B–28Cr–13Al alloy in simulated MSW incineration environment10.1016/j.jmrt.2022.11.175 ↗
3. Effect of oxygen doping on the corrosion behavior of nanocrystalline coating under the synergy of solid NaCl deposit and water vapor10.1016/j.jmst.2022.09.023 ↗
4. Progress in coatings for gas turbine airfoils10.1016/S0257-8972(98)00667-7 ↗
5. Effect of Pt and Al content on the long-term, high temperature oxidation behavior and interdiffusion of a Pt-modifed aluminide coating deposited on Ni-base superalloys10.1016/j.surfcoat.2006.07.246 ↗
6. Hot corrosion studies on Ni-base superalloy at 650 °C under marine-like environment conditions using three salt mixture (Na2SO4 + NaCl + NaVO3)10.1016/j.corsci.2016.01.008 ↗
7. Oxidation and hot corrosion behaviors of Mo-doped NiMoAlY alloys at 750 °C10.1016/j.corsci.2022.110262 ↗
8. Synergistic Effect of NaCl and water vapour on the corrosion of 1Cr–11Ni–2W–2Mo–V Steel at 500–700 °C10.1023/A:1018854202982 ↗
9. The selection of materials for marine gas turbine engines
10. Corrosion behavior of a sputtered K38G nanocrystalline coating with a solid NaCl deposit in wet oxygen at 600 to 700 °C10.1023/A:1016072726338 ↗
11. Failure of first stage gas turbine blades10.1016/j.engfailanal.2003.08.010 ↗
12. Corrosion behaviour of aluminide coatings on Ti-based alloy in the marine environment at high temperature10.1016/j.corsci.2022.110750 ↗
13. High temperature alloy chlorination at 850 °C10.1002/maco.200604013 ↗
14. Effect of titanium element on high temperature chlorine corrosion properties of 904 L alloy10.1016/j.corsci.2022.110915 ↗
15. Corrosion behavior of Ti60 alloy under continuous NaCl solution spraying at 600 °C10.1016/j.jmst.2022.01.032 ↗
16. High-temperature corrosion of austenitic alloys in HCl and H2S containing atmospheres under reducing conditions10.1016/j.corsci.2022.110214 ↗
17. Influence of water vapor on the chlorine-induced high-temperature corrosion behavior of nickel aluminide coatings10.1016/j.corsci.2021.109689 ↗
18. AlxCoCrFeNi high entropy alloys with superior hot corrosion resistance to Na2SO4 + 25% NaCl at 900 °C10.1016/j.corsci.2021.109479 ↗
19. Protection of 304 stainless steel by nano-modified silicone coating in cyclically alternate corrosion environment10.1016/j.corsci.2021.109712 ↗
20. single-phase Pt-modifed aluminide coating and the enhanced hot corrosion resistance10.1016/j.corsci.2018.02.006 ↗
21. Breaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloys10.1016/j.corsci.2021.109594 ↗
22. Hot corrosion properties of composite coatings in the presence of NaCl at 700 and 900 °C10.1016/j.corsci.2013.01.004 ↗
23. Chlorine-induced high-temperature corrosion characteristics of Ni-Cr alloy cladding layer and Ni-Cr-Mo alloy cladding layer10.1016/j.corsci.2023.111102 ↗
24. Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part I: NaCl–KCl binary system10.1016/j.solmat.2020.110659 ↗
25. Ni-Mo-Cr alloy corrosion in molten NaCl-KCl-MgCl2 salt and vapour10.1016/j.corsci.2020.109183 ↗
26. Studies on corrosion behavior of a single-crystal superalloy and its sputtered nanocrystalline coatings with solid NaCl deposit in O2 + 38 vol% H2O environment at 700 °C10.1016/j.corsci.2019.108187 ↗
27. Revealing of corrosion behavior of GH4169 under the alternate environment of intermediate temperature NaCl spraying and marine atmosphere10.1016/j.jmrt.2022.12.081 ↗
28. Corrosion behaviour of iron and nickel aluminide coatings under the synergistic effect of NaCl and water vapour10.1016/j.corsci.2021.109484 ↗
29. Oxidation of Fe-10Cr in O2 and in O2 + H2O environment at 600 °C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
30. Oxidation of an austenitic stainless steel with or without alloyed aluminum in O2 + 10% H2O environment at 800 °C10.1016/j.corsci.2017.03.015 ↗
31. High-temperature corrosion behaviour of Pt-modifed aluminide coating with solid NaCl deposit in O2 + 10 vol% H2O and the influence of pre-oxidation treatment10.1016/j.corsci.2022.110421 ↗
32. Effect of water vapor content on corrosion performance of aluminide coatings on TP347H in a simulated biomass combustion environment10.1016/j.jmrt.2022.07.170 ↗
33. Measurement of the stress in oxide scales formed by oxidation of alumina-forming alloys10.1007/BF01046985 ↗
34. The effect of water vapor on the oxidation of alloys that develop alumina scales for protection10.1007/s11661-999-0128-3 ↗
35. High temperature chloride corrosion behavior of AlFe2.5NiMoNbCr high-entropy alloy10.1016/j.corsci.2022.110139 ↗
36. KCl-induced corrosion of the FeCrAl alloy Kanthal AF at 600 °C and the effect of H2O10.1007/s11085-014-9506-3 ↗
37. Effects of an oxygen potential gradient and water vapor on mass transfer in polycrystalline alumina at high temperatures10.1016/j.actamat.2018.03.021 ↗
38. Oxidation behavior of Al/Y co-modified nanocrystalline coatings with different Al content on a nickel-based single-crystal superalloy10.1016/j.corsci.2020.108700 ↗
39. Characterization of alumina scales grown on a 2nd generation single crystal Ni superalloy during isothermal oxidation at 1050, 1100 and 1150 °C10.1007/s11085-014-9487-2 ↗
40. 18O/SIMS Characterization of the growth mechanism of doped and undoped-Al2O310.1007/BF00665610 ↗
41. Evolution of micro-pores in Ni–Cr alloys via molten salt dealloying10.1038/s41598-022-20286-5 ↗
42. Corrosion behaviors and protective layer stabilization mechanism of 316 stainless steel in NaCl–KCl–NaF reciprocal salts at high temperatures10.1016/j.corsci.2022.110893 ↗
43. Effects of laser shock processing on θ-Al2O3 to α-Al2O3 transformation and oxide scale morphology evolution in (γ′+β) two-phase Ni-34Al-0.1Dy alloys10.1016/j.jmst.2021.09.028 ↗
44. Co-doping effect of Hf and Y on improving cyclic oxidation behavior of (Ni,Pt)Al coating at 1150 °C10.1016/j.corsci.2020.109093 ↗
45. Enhanced oxidation and corrosion inhibition of 1Cr11Ni2W2MoV stainless steel by nano-modified silicone-based composite coatings at 600 °C10.1016/j.corsci.2020.108599 ↗
46. Corrosion behavior of pure Cr with a solid NaCl deposit in O2 plus water vapor10.1023/A:1004690518225 ↗
47. Studies on the corrosion behavior of Fe-20Cr alloy in NaCl solution spray at 600 °C10.1016/j.corsci.2018.01.033 ↗