Novel internal oxidation behavior of new 17Cr2Ni2MoVNb steel
Source abstract
Abstract
The oxidation behavior of 17Cr2Ni2MoVNb steel in air was studied at different temperatures using advanced characterization techniques. The variation in oxidation products with temperature was revealed, and the selective oxidation mechanism at the front of the inner oxide layer was determined. Factors affecting the morphology, composition, and structure of the oxide near the interface were determined. A novel internal oxidation model with a multilayer core/shell structure induced by defects and interfaces was proposed, which was mainly controlled by the diffusion pathway of oxygen, thermodynamic properties, and intragranular defects.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Effect of cryogenic treatment on microstructure, mechanical properties and distortion of carburized gear steels10.3390/met11121940 ↗
2. Very high cycle fatigue properties of 18CrNiMo7-6 carburized steel with gradient hardness distribution10.3390/coatings11121482 ↗
3. Investigation of tooth wears from scuffing of heavy duty machine spur gears10.1016/j.mechmachtheory.2014.08.016 ↗
4. On the growth and electrical characterization of CuO nanowires by thermal oxidation10.1063/1.3187833 ↗
5. Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2020.125497 ↗
6. Effect of tempering temperatures on tensile properties and rotary bending fatigue behaviors of 17Cr2Ni2MoVNb steel10.3390/met8070507 ↗
7. Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening10.1016/j.ijfatigue.2020.105867 ↗
8. Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2019.03.061 ↗
9. Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys10.1016/j.jallcom.2014.11.012 ↗
10. Effect of cryogenic treatment on the microstructure and wear resistance of 17Cr2Ni2MoVNb Carburizing Gear Steel10.3390/coatings12020281 ↗
11. Effect of carburizing process on high cycle fatigue behavior of 18CrNiMo7-6 steel10.1016/j.jmrt.2021.12.074 ↗
12. Case internal oxidation and intergranular fracture of carburized splined-shaft10.1016/j.engfailanal.2012.01.016 ↗
13. Oxidation behavior of arc melted AlCoCrFeNi multi-component high-entropy alloys10.1016/j.jallcom.2016.02.257 ↗
14. Reduced internal oxidation by a rapid carburizing technology enhanced by pre-oxidation for 18CrNiMo7-6 gear steel10.1016/j.vacuum.2018.11.006 ↗
15. Effect of pre-oxidation on carburisation and metal dusting of nano-crystalline Ni–Cr Alloys10.1007/s11085-014-9472-9 ↗
16. Effect of pre-oxidization on the cyclic coking and carburizing resistance of HP40 alloy: With and without yttrium modification10.1016/j.corsci.2013.06.002 ↗
17. Wear analysis of treated duplex stainless steel material by carburizing process – a review10.1016/j.matpr.2020.02.608 ↗
18. Atmosphere influence on oxidation at high temperature of Ni–Cr–Si model alloys10.1007/s11085-021-10056-5 ↗
19. Effect of oxidation with lanthanum sol–gel coating on the 330Cb carburization at 900 °C10.1007/s11085-013-9390-2 ↗
20. Pre-oxidation effect on oxidation behavior of F91 in carbon dioxide at 550 °C10.1007/s11085-018-9850-9 ↗
21. Mechanism of LaFeO3 perovskite and gradient strain nanocrystalline improving carbon atom diffusion and tribological properties of carburizing steel10.1016/j.triboint.2022.107961 ↗
22. Cyclic carburizing behaviour of Al modified high Si-containing HP40 alloy10.1016/j.corsci.2012.10.035 ↗
23. Understanding the surface oxide evolution of T91 ferritic-martensitic steel in supercritical water through advanced characterization10.1016/j.actamat.2020.05.016 ↗
24. New insights into the oxidation mechanisms of a ferritic-martensitic steel in high-temperature steam10.1016/j.actamat.2020.05.052 ↗
25. Microstructural understanding of the oxidation of an austenitic stainless steel in high-temperature steam through advanced characterization10.1016/j.actamat.2020.05.010 ↗
26. Microstructure understanding of high Cr-Ni austenitic steel corrosion in high-temperature steam10.1016/j.actamat.2022.117634 ↗
27. AnT²COK, an analytical model for cyclic oxidation kinetics of hot-work tool steels in transient thermal cycling conditions10.1016/j.corsci.2018.11.009 ↗
28. Investigation on early formation and evolution of oxide scales on ferritic–martensitic steels in supercritical water10.1016/j.corsci.2018.02.036 ↗
29. Revealing the oxidation mechanism of 310S stainless steel in supercritical water via high-resolution characterization10.1016/j.corsci.2022.110212 ↗
30. Corrosion behavior of 9–12% Cr ferritic–martensitic steels in supercritical water10.1016/j.corsci.2009.12.032 ↗
31. Influence of temperature on the oxidation behaviour of a ferritic-martensitic steel in supercritical water10.1016/j.corsci.2016.10.020 ↗
32. The effect of grain-boundary diffusion on the oxidation of low-chromium steels10.4028/www.scientific.net/DDF.237-240.946 ↗
33. The influence of the rare earth element Ce on the high-temperature oxidation kinetics of Low-Cr steels10.1007/s11665-008-9248-y ↗
34. Corrosion of ferritic–martensitic steels in steam and supercritical water10.1016/j.jnucmat.2012.09.037 ↗
35. Effects of precipitation on the scale and grain growth in 9% Cr tempered martensite steel upon steam oxidation10.1016/j.matchar.2020.110497 ↗
36. Predictions and analyses on the growth behavior of oxide scales formed on ferritic–martensitic in supercritical water10.1007/s11085-019-09912-2 ↗
37. Water vapour effects on Fe–Cr alloy oxidation10.1007/s11085-009-9183-9 ↗
38. Oxidation of binary FeCr alloys (Fe–2.25Cr, Fe–10Cr, Fe–18Cr and Fe–25Cr) in O2 and in O2 + H2O environment at 600 °C10.1007/s11085-010-9229-z ↗
39. Influence of oxidation temperature and Cr content on the adhesion and microstructure of scale on low Cr steels10.1007/s11085-009-9167-9 ↗
40. Atomic origins of water-vapour-promoted alloy oxidation10.1038/s41563-018-0078-5 ↗
41. Y-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation resistance and structure stability at 1000 °C and 1100 °C10.1016/j.corsci.2020.109191 ↗
42. Mechanistic understanding of the temperature dependence of crack growth rate in alloy 600 and 316 stainless steel through high-resolution characterization10.1016/j.actamat.2018.11.039 ↗
43. High-resolution characterization of the internal and external oxidation of austenitic alloys in supercritical water10.1016/j.scriptamat.2021.113814 ↗
44. Effect of surface finishing on the oxidation characteristics of a Fe-21Cr-32Ni alloy in supercritical carbon dioxide10.1016/j.corsci.2021.110019 ↗
45. Microstructural investigation of the nodular corrosion of 304NG stainless steel in supercritical water10.1016/j.corsci.2020.108652 ↗
46. Effect of pre-oxidation on hot corrosion resistance of HR3C stainless steel in sulfate salt with or without Fe2O310.1016/j.corsci.2021.109789 ↗
47. Grain-size effects on the high-temperature oxidation behaviour of chromium steels10.1007/s11085-010-9192-8 ↗
48. A mechanistic study of SCC in Alloy 600 through high-resolution characterization10.1016/j.corsci.2018.01.004 ↗
49. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
50. Effect of Al content on high temperature oxidation resistance of AlxCoCrCuFeNi high entropy alloys (x=0, 0.5, 1, 1.5, 2)10.1016/j.vacuum.2019.108837 ↗
51. High-temperature oxidation behavior of the Crofer 22 APU steel coated with (La,Sr)(Co,Fe)O3 film prepared by pulsed laser deposition10.1016/j.tsf.2020.138316 ↗
52. Spalling resistance of thermally grown oxide based on NiCoCrAlY(Ti) with different oxide peg sizes10.1007/s12598-019-01339-7 ↗
53. Glass coatings on stainless steels for high-temperature oxidation protection: Mechanisms10.1016/j.corsci.2014.01.033 ↗
54. High-temperature oxidation behaviour of low-entropy alloy to medium-and high-entropy alloys10.1007/s10973-018-6963-y ↗
55. Thermally stimulated iron oxide transformations and magnetic behaviour of cerium dioxide/iron oxide reactive sorbents10.1016/j.matchar.2016.09.009 ↗
56. Transformation of magnetite (Fe3O4) and maghemite (γ–Fe2O3) to α–Fe2O3 from magnetic phase of glagah iron sand
57. Growth and branching of CuO nanowires by thermal oxidation of copper10.1016/j.jcrysgro.2005.11.111 ↗
58. Formation of modulated structures induced by oxygen vacancies in α-Fe2O3 nanowires10.1016/j.jcrysgro.2018.05.031 ↗
59. The origin of hematite nanowire growth during the thermal oxidation of iron10.1016/j.mseb.2011.12.034 ↗
60. Influence of fuel combustion on the corrosion behavior of pipeline steels in fire flooding technology10.1038/s41529-022-00230-8 ↗
61. Oxidation mechanism of T91 steel in liquid lead-bismuth eutectic: with consideration of internal oxidation10.1038/srep35268 ↗
62. Effect of heat treatment on phase stability and wear behavior of laser clad AlCoCrFeNiTi0.8 high-entropy alloy coatings10.1016/j.surfcoat.2020.125758 ↗
63. The characteristic of oxide scales on T91 tube after long-term service in an ultra-supercritical coal power plant10.1016/j.supflu.2012.08.015 ↗
64. Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy10.1016/j.matchemphys.2018.09.033 ↗
65. Effects of electron microscope parameters and sample thickness on high angle annular dark field imaging10.1155/2022/8503314 ↗
66. Novel strategy for space group determination in real space10.1016/j.jmst.2022.04.058 ↗
67. Electron ptychography of 2D materials to deep sub-angstrom resolution10.1038/s41586-018-0298-5 ↗
68. Oxidation behavior of ferritic–martensitic and ODS steels in supercritical water10.1016/j.jnucmat.2012.03.009 ↗
69. Estimation of the atomic radii of periodic elements using support vector machine10.15693/IJAISTAUG001/001 ↗
70. Hot corrosion behavior of electrodeposited SiO2 coating on TiAl alloy10.1016/j.corsci.2020.108827 ↗
71. In situ and time resolved study of the-transition in nanometric particles10.1016/j.jssc.2007.06.013 ↗
72. Oxidation behavior of 9Cr-4.5Al ODS steel in 600 °C supercritical water and the effect of pre-oxidation10.1016/j.corsci.2019.108380 ↗
73. Oxidation behaviour of super 304H stainless steel in supercritical water10.1080/1478422X.2018.1459064 ↗
74. The history of the point defect model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
75. The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073 K10.2320/matertrans.M2009212 ↗
76. Formation of chromium oxide on 316L austenitic stainless steel10.1116/1.580010 ↗
77. Diffusion of Ta and its influence on oxidation behavior of nanocrystalline coatings with different Ta, Y and Al contents10.1016/j.corsci.2017.07.017 ↗
78. Evolution in wear and high-temperature oxidation resistance of laser-clad AlxMoNbTa refractory high-entropy alloys coatings with Al addition content10.3390/coatings12020121 ↗
79. Chapter 3.3 – Ellingham diagram
80. Competition between thermodynamics, kinetics and growth mode in the early-stage oxidation of an equimolar CoCrFeNi alloy10.1016/j.actamat.2020.06.056 ↗
81. Barin · 1989
82. Effect of Mo and Ti on the microstructure and microhardness in AlCoFeNiMoTi high entropy alloys prepared by mechanical alloying and conventional sintering10.1016/j.apt.2020.02.008 ↗
83. Compositional effects on the high-temperature oxidation lifetime of MCrAlY type coating alloys10.1016/j.corsci.2015.03.011 ↗
84. The oxidation behavior of an equimolar FeCoNiCrMn high-entropy alloy at 950 °C in various oxygen-containing atmospheres10.1016/j.corsci.2016.03.020 ↗
85. Energetic landscape and diffusion of He in α-Fe grain boundaries from first principles10.1103/PhysRevB.87.134107 ↗
86. Effect of quenching temperature on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel10.3390/met8090735 ↗
87. Observation of internal oxidation in a 20% cold-worked Fe-17Cr-12Ni stainless steel through high-resolution characterization10.1016/j.scriptamat.2019.08.019 ↗
88. Selective oxidation of ternary Fe-Mn-Si alloys during annealing process10.1016/j.corsci.2020.108859 ↗
89. Birks · 2006
90. A study of the scale structure of hot-rolled steel strip by simulated coiling and cooling10.1023/A:1004637127231 ↗