Intelligentization of traditional sacrificial anode Zn by Mg-alloying for reinforcing steel
Source abstract
Abstract
Traditional sacrificial anode Zn was intelligentized by Mg-alloying to automatically detect chloride contamination and smartly protect reinforcing steel. The intelligence of the Zn-Mg alloys was investigated in a simulated concrete pore solution (SCPS) contaminated by different concentrations of chloride. The results showed that the Zn-11Mg, Zn-32Mg, Zn-43Mg and Zn-66Mg were more sensitive to chloride contamination and could provide more sufficient current to protect the steel according to the corrosivity of the contaminated solution than the Zn, Zn-6Mg, Zn-19Mg and Mg. The corrosion resistance and the anodic behavior of these alloys coupled with the steel were systematically analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Magnesium alloy anode as a smart corrosivity detector and intelligent sacrificial anode protector for reinforced concrete10.1016/j.corsci.2019.04.027 ↗
2. Corrosion inhibition of galvanized steel by M n O 4 - ion as a soluble inhibitor in simulated fresh concrete environment10.1016/j.conbuildmat.2020.119532 ↗
3. Effect of environmental temperature on efficiency of electrochemical chloride removal from concrete10.1016/j.conbuildmat.2018.10.187 ↗
4. Effect of ginger extract as green inhibitor on chloride-induced corrosion of carbon steel in simulated concrete pore solutions10.1016/j.jclepro.2018.12.299 ↗
5. Distribution of corrosion products at the steel-concrete interface: influence of mill scale properties, reinforcing steel type and corrosion inducing method10.1016/j.conbuildmat.2019.116854 ↗
6. Critical chloride content in reinforced concrete – a review10.1016/j.cemconres.2009.08.006 ↗
7. Cathodic prevention and cathodic protection of zinc mesh sacrificial anode for reinforced concrete in 15% salt water10.4028/www.scientific.net/AMM.665.167 ↗
8. A comparative investigation on cathodic protections of three sacrificial anodes on chloride-contaminated reinforced concrete10.1016/j.conbuildmat.2020.118476 ↗
9. Galvanic anodes for reinforced concrete structures: a review10.5006/2613 ↗
10. Improvement of intelligent corrosivity-detection and corrosion-protection for reinforcing steel10.1016/j.corsci.2021.109396 ↗
11. Monitoring results of galvanic anodes in steel reinforced concrete over 20 years10.1016/j.conbuildmat.2020.121309 ↗
12. The anodic surface film and hydrogen evolution on Mg10.1016/j.corsci.2015.05.047 ↗
13. Corrosion and passivation of magnesium alloys10.1016/j.corsci.2016.05.041 ↗
14. What activates the Mg surface – a comparison of Mg dissolution mechanisms10.1016/j.jmst.2020.03.060 ↗
15. The anodically polarized Mg surface products and accelerated hydrogen evolution
16. The effect of pH on the selective dissolution of Zn and Al from Zn–Al coatings on steel10.1016/j.corsci.2012.09.042 ↗
17. Characterization of corrosion products of Zn and Zn–Mg–Al coated steel in a marine atmosphere10.1016/j.corsci.2014.06.017 ↗
18. Influence of magnesium content on the corrosion resistance of the cut-edges of Zn–Mg-coated steel10.1016/j.corsci.2015.04.019 ↗
19. Effects of magnesium on the microstructure and corrosion resistance of Zn–55Al–1.6Si coating10.1016/j.conbuildmat.2014.08.023 ↗
20. Evaluation of the impact of corrosion of hot-dip galvanized reinforcement on bond strength with concrete – a review10.1016/j.conbuildmat.2016.11.096 ↗
21. Corrosion mechanisms of Zn(Mg,Al) coated steel: 2. The effect of Mg and Al alloying on the formation and properties of corrosion products in different electrolytes10.1016/j.corsci.2014.07.042 ↗
22. Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn–Al–Mg coatings10.1016/j.jallcom.2016.02.026 ↗
23. Effects of Mg on morphologies and properties of hot dipped Zn–Mg coatings10.1016/j.surfcoat.2014.06.067 ↗
24. Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn–Mg coating on steel10.1016/j.corsci.2009.03.005 ↗
25. Corrosion behavior of Zn-Mg alloys in saturated Ca(OH)2 solution10.1016/j.corsci.2018.03.032 ↗
26. Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy
27. O. Shcherban, S. Ilyenko, D. Matusch, J. Gröbner, V. Turkevich, M. Materials Science International Team, G. Effenberg, Mg-Zn Binary Phase Diagram Evaluation·Phase diagrams, crystallographic and thermodynamic data: Datasheet from MSI Eureka in SpringerMaterials (https://materials.springer.com/msi/docs/sm_msi_r_20_011446_01), MSI Materials Science International Services GmbH, n.d. 〈https://materials.springer.com/msi/docs/sm_msi_r_20_011446_01〉.
28. Understanding magnesium corrosion – a framework for improved alloy performance10.1002/adem.200310405 ↗
29. Influence of microstructure on the corrosion of diecast AZ91D
30. Enhancement of mechanical properties and corrosion resistance of Mg–Ca alloys through microstructural refinement by indirect extrusion10.1016/j.corsci.2014.01.041 ↗
31. Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys10.1149/1.3523229 ↗
32. The corrosion of Al-supersaturated Mg matrix and the galvanic effect of secondary phase nanoparticles10.1016/j.corsci.2021.109410 ↗
33. New insights on the corrosion mechanism of a peak-aged Mg–9Al–1Zn alloy in a chloride environment10.1016/j.jallcom.2020.155786 ↗
34. Characterization of corrosion interfaces by the scanning kelvin probe force microscopy technique10.1149/1.1359199 ↗
35. A burnished and Al-alloyed magnesium surface with improved mechanical and corrosion properties10.1016/j.corsci.2021.109395 ↗
36. Technical note: concerning the conversion of the constant phase element parameter Y 0 into a capacitance10.5006/1.3280607 ↗
37. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
38. A novel fabrication method of surface-porous Mg-Al alloy and its corrosion property
39. Effect of the electrolyte pH on the corrosion mechanisms of Zn-Mg coated steel10.1016/j.corsci.2016.02.041 ↗
40. Film breakdown and nano-porous Mg(OH) 2 formation from corrosion of magnesium alloys in salt solutions10.1149/2.0171504jes ↗
41. Transmission electron microscopy study of aqueous film formation and evolution on magnesium alloys10.1149/2.024406jes ↗
42. Tracer film growth study of the corrosion of magnesium alloys AZ31B and ZE10A in 0.01% NaCl solution10.1149/2.1211707jes ↗
43. Air permeability of the artificially synthesized Zn–Al–Mg alloy rusts10.1016/j.corsci.2006.12.008 ↗
44. Change of electrochemical property of reinforced concrete after electrochemical chloride extraction10.1007/s11595-006-4764-9 ↗