Corrosion evolution of 2205 duplex stainless steel in hot concentrated seawater under intermittent vacuum and boiling conditions
Source abstract
Abstract
Abstract Long-term corrosion behavior of 2205 duplex stainless steel was investigated in the hot concentrated artificial seawater under intermittent vacuum boiling and atmosphere conditions during the immersion of more than one year by using electrochemical impedance spectroscopy (EIS). Compared to the atmosphere state, the passive film formed on specimen surface is thinner and the induction time for pitting corrosion decreases notably under intermittent vacuum boiling condition. However, the pit propagation is retarded by the lower dissolved oxygen content and violent boiling of solution. The vacuum boiling of solution has opposite effect on the initiation and stable growth processes of pitting corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Advanced MED process for most economical sea water desalination10.1016/j.desal.2005.02.026 ↗
2. Forty-year design life the next target Material selection and operating conditions in thermal desalination plants10.1016/S0011-9164(01)00179-5 ↗
3. Cavitation corrosion of duplex stainless steel in seawater10.5006/1.3280438 ↗
4. Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution10.1016/S0921-5093(00)00899-6 ↗
5. Passivation degradation of Alloy 800 in boiling solution containing thiosulphate10.1016/j.electacta.2017.03.037 ↗
6. Erosion–corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles10.1016/j.corsci.2006.08.023 ↗
7. Effect of cavitation on the corrosion behaviour of welded and non-welded duplex stainless steel in aqueous LiBr solutions10.1016/j.corsci.2005.09.009 ↗
8. Effect of temperature, chloride and dissolved oxygen concentration on the open circuit and transpassive potential values of 316L stainless steel at high-temperature pressurized water10.1016/j.nucengdes.2017.06.048 ↗
9. Effects of pH and dissolved oxygen on electrochemical behavior and oxide films of 304SS in borated and lithiated high temperature water10.1016/j.corsci.2012.03.022 ↗
10. Effects of dissolved oxygen on electrochemical and semiconductor properties of 316L stainless steel10.1016/j.jnucmat.2010.10.010 ↗
11. Duplex — a new generation of stainless steels for desalination plants10.1016/j.desal.2006.02.051 ↗
12. Corrosion behavior of some highly alloyed stainless steels in seawater10.1016/0011-9164(94)00086-7 ↗
13. Assessment of lower-alloy stainless steels for use in desalination plant10.1016/0011-9164(91)85135-H ↗
14. Evaporators made of solid duplex stainless steel. A new approach to reduced costs10.1016/0011-9164(94)00075-1 ↗
15. Stainless steels for desalination plants10.1016/j.desal.2005.02.050 ↗
16. Long-term behaviour of AISI 304L passive layer in chloride containing medium10.1016/j.electacta.2005.06.040 ↗
17. De-alloying of 316 stainless steel in the presence of a mixture of metal-oxidizing bacteria10.1016/j.corsci.2011.08.043 ↗
18. Long-term corrosion behaviour of stainless reinforcing steel in mortar exposed to chloride environment10.1016/j.corsci.2012.11.035 ↗
19. Electrochemical corrosion characteristics of type 316L stainless steel in hot concentrated seawater10.1016/j.corsci.2013.12.004 ↗
20. Corrosion studies of austenitic and duplex stainless steels in aqueous lithium bromide solution at different temperatures10.1016/j.corsci.2004.05.025 ↗
21. Effect of temperature on the corrosion resistance and pitting behaviour of Alloy 31 in LiBr solutions10.1016/j.corsci.2008.03.016 ↗
22. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
23. The electrochemical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride10.1016/j.electacta.2012.01.025 ↗
24. Pit growth studies in stainless steel foils. II. Effect of temperature, chloride concentration and sulphate addition10.1016/S0010-938X(01)00134-2 ↗
25. Electrochemical investigations of pitting corrosion behaviour of type UNS S31603 stainless steel in thiosulfate-chloride environment10.1023/B:JACH.0000005579.84264.73 ↗
26. Effect of chloride ions on the corrosion behaviour of steel in 0.1M citrate10.1016/j.electacta.2005.05.011 ↗
27. Pitting potentials and inhibition potentials of iron and nickel for different aggressive and inhibiting anions10.1016/0010-938X(77)90002-6 ↗
28. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium10.1016/j.corsci.2010.12.019 ↗
29. Critical pitting temperature (CPT) assessment of 2205 duplex stainless steel in 0.1M NaCl at various molybdate concentrations10.1016/j.corsci.2010.08.008 ↗
30. Influence of sigma phase formation on pitting corrosion of an aged UNS S31803 duplex stainless steel10.5006/0768 ↗
31. Pitting corrosion resistance of sensitized type 2205 duplex stainless steel in hot concentrated seawater10.1007/s10008-019-04372-9 ↗
32. Franc · 2006
33. Effect of cavitation on corrosion behavior of 20SiMn low-alloy steel in 3% sodium chloride solution10.5006/1.3277590 ↗
34. Interaction of mechanical and electrochemical factors in erosion–corrosion of carbon steel10.1016/j.electacta.2005.04.032 ↗
35. Effect of laser surface melting on the corrosion and cavitation erosion behaviors of a manganese–nickel–aluminium bronze10.1016/j.msea.2004.01.016 ↗
36. Electrochemical characterisation of a martensitic stainless steel in a neutral chloride solution10.1016/j.electacta.2012.09.011 ↗
37. Repassivation of the damage generated by cavitation on UNS N08031 in a LiBr solution by means of electrochemical techniques and Confocal Laser Scanning Microscopy10.1016/j.corsci.2010.06.018 ↗
38. In situ surface enhanced Raman spectroscopic study on the effect of dissolved oxygen on the corrosion film on low carbon steel in 0.01 M NaCl solution10.1016/S0013-4686(01)00442-X ↗
39. The effect of oxygen on the open-circuit passivity of Fe-18Cr10.1016/0010-938X(86)90039-9 ↗
40. Effect of ozone on corrosion behavior of mild steel in seawater10.1016/j.corsci.2011.10.020 ↗
41. Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: Effects of oxygen, acid concentration and surface roughness10.1016/j.electacta.2008.10.038 ↗
42. Port · 1990 · 219
43. Effects of dissolved oxygen on passive behavior of stainless alloys10.1016/j.corsci.2005.05.048 ↗
44. Electrochemical corrosion behavior of 2205 duplex stainless steel in hot concentrated seawater under vacuum conditions10.1016/j.corsci.2019.108383 ↗
45. The effect of chloride concentration on early stages of pitting for type 304 stainless steel revealed by the AC impedance method10.1016/S0010-938X(96)00127-8 ↗
46. Pitting corrosion mechanism of Type 304 stainless steel under a droplet of chloride solutions10.1016/j.corsci.2006.08.016 ↗
47. Application of localised electrochemical techniques to study kinetics of initiation and propagation during pit growth10.1016/S0013-4686(99)00154-1 ↗
48. Effect of bacterial biofilm on 316 SS corrosion in natural seawater by EIS10.1016/S0010-938X(98)00100-0 ↗
49. Multi-effect distillation plants state of the art10.1016/S0011-9164(99)00154-X ↗
50. A generic statistical methodology to predict the maximum pit depth of a localized corrosion process10.1016/j.corsci.2011.03.026 ↗
51. Effects of applied potential on stable pitting of 304 stainless steel10.1016/j.corsci.2015.01.034 ↗
52. Effect of dissolved oxygen on electrochemical corrosion behavior of 2205 duplex stainless steel in hot concentrated seawater10.1016/j.jmst.2020.06.030 ↗
53. Applications of Kramers—Kronig transforms in the analysis of electrochemical impedance data—III. Stability and linearity10.1016/0013-4686(90)80010-L ↗
54. In-situ electrochemical impedance spectroscopy investigations on the early stage corrosion behavior of Zircaloy-4 in high-temperature lithiated water10.1016/j.corsci.2020.109223 ↗
55. Electrochemical impedance spectroscopy (EIS) as a new tool for investigating methods of corrosion protection10.1016/0013-4686(90)80007-B ↗
56. Effect of time on the characteristics of passive film formed on stainless steel10.1016/j.apsusc.2017.03.155 ↗
57. ICDD, PDF-2 Database, Release 2004, International Centre for Diffraction Data, Newtown Square, PA, USA, (2004).
58. Studies of scale formation and optimization of antiscalant dosing in multi-effect thermal desalination units10.1016/j.desal.2007.01.036 ↗
59. Unmasking chloride attack on the passive film of metals10.1038/s41467-018-04942-x ↗
60. Direct evidence of passive film growth on 316 stainless steel in alkaline solution10.1016/j.matchar.2017.05.013 ↗
61. Degradation in pitting resistance of 316L stainless steel under hydrostatic pressure10.1016/j.electacta.2016.05.169 ↗
62. Observation of passive films on Fe–20Cr–xNi (x=0, 10, 20wt%) alloys using TEM and Cs-corrected STEM–EELS10.1016/j.corsci.2013.10.023 ↗
63. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
64. The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides10.1016/j.electacta.2011.02.094 ↗
65. A comparative study of primary and secondary passive films formed on AM355 stainless steel in 0.1 M NaOH10.1016/j.apsusc.2017.08.151 ↗
66. A comparative study of critical pitting temperature (CPT) of stainless steels by electrochemical impedance spectroscopy (EIS), potentiodynamic and potentiostatic techniques10.1016/j.corsci.2012.02.026 ↗
67. Szklarska-Smialowska · 2005 · 27
68. Electrochemical impedance spectroscopy as a monitoring tool for passivation and localized corrosion of aluminum alloys10.1002/maco.19880391102 ↗
69. Pitting and passivation of Al alloys and Al‐based metal matrix composites10.1149/1.2086442 ↗
70. Application of EIS to localized corrosion10.1016/0013-4686(90)80018-J ↗
71. Application of impedance technique to localized corrosion10.1016/0010-938X(88)90002-9 ↗
72. Cao · 2008 · 186
73. Electrochemical corrosion characteristics of type 316 stainless steel in simulated anode environment for PEMFC10.1016/S0013-4686(03)00113-0 ↗
74. Inhibitive effect of sodium eperuate on zinc corrosion in alkaline solutions10.1016/j.corsci.2008.04.019 ↗
75. Mechanistic investigation of hydrogen-enhanced anodic dissolution of X-70 pipe steel and its implication on near-neutral pH SCC of pipelines10.1016/j.electacta.2007.07.015 ↗
76. The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride10.1016/j.corsci.2010.11.010 ↗
77. Photocathodic protection effect of TiO2 films for carbon steel in 3% NaCl solutions10.1016/j.electacta.2004.12.031 ↗
78. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
79. EIS study of potentiostatically formed passive film on 304 stainless steel10.1016/j.electacta.2011.07.072 ↗
80. Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments10.1016/j.corsci.2010.06.016 ↗
81. From Bacon to barriers: a review on the passivity of metals and alloys10.1007/s100080100219 ↗
82. On the role of Cr in the passivity of stainless steel10.1149/1.2108450 ↗
83. Element-resolved corrosion analysis of stainless-type glass-forming steels10.1126/science.1230081 ↗
84. Transport processes and the mechanism of pitting of metals10.1149/1.2132857 ↗
85. An assessment of the corrosion behaviour of high-grade alloys in seawater at elevated temperature and under a high velocity impinging flow10.1016/0010-938X(96)00180-1 ↗