Regulating the oxidation resistance of Cu-5Ag alloy by heat treatment
Source abstract
Abstract
Abstract Improving the oxidation resistance without sacrificing the electrical conductivity of Cu is of great importance for researchers due to its widespread application. In this study, oxidation resistance of Cu-5 wt%Ag alloy under solution treatment (ST) and aging treatment (AT) were studied systematically. It has been confirmed that AT sample demonstrates considerably higher oxidation resistance than ST sample at elevated temperatures. The aging treatment enhanced the formation of a continuous Ag network along grain boundaries, which could act as a barrier for both inward diffusion of oxygen and outward diffusion of Cu along grain boundaries during oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Copper interconnect technology for the 22 nm node
2. Oxidation behavior of graphene-coated copper at intrinsic graphene defects of different origins10.1038/s41467-017-01814-8 ↗
3. Copper alloys: preparation, properties and applications
4. Kinetic hindrance during the surface oxidation of Cu(100)-c(10x2)-Ag10.1063/1.3020351 ↗
5. Surface coordination layer passivates oxidation of copper10.1038/s41586-020-2783-x ↗
6. Enhancing oxidation resistance of Cu during repeated melting by the in-situ formation of protective oxide films10.1016/j.matlet.2020.129234 ↗
7. Oxidation resistance of iron and copper foils coated with reduced graphene oxide multilayers10.1021/nn3017316 ↗
8. Effects of Y2O3 on the property of copper based contact materials10.1016/j.compositesb.2013.02.036 ↗
9. Ultrahigh oxidation resistance and high electrical conductivity in copper-silver powder10.1038/srep39650 ↗
10. Cu-Ag core-shell nanoparticles with enhanced oxidation stability for printed electronics10.1088/0957-4484/26/45/455601 ↗
11. Multilayer regulation of atomic boron nitride films to improve oxidation and corrosion resistance of Cu10.1021/acsami.7b06425 ↗
12. Kondo · 2014
13. Electroless silver coating on fine copper powder and its effects on oxidation resistance10.1016/S0167-577X(03)00252-0 ↗
14. Oxidation resistance of graphene coated Cu and CuNi alloy10.1021/nn103028d ↗
15. Atomically thin hexagonal boron nitride nanofilm for Cu protection: the importance of film perfection
16. Chemical and electrical characterisation of the segregation of Al from a CuAl alloy (90%: 10% wt) with thermal anneal10.1016/j.tsf.2015.12.056 ↗
17. Oxidation and protection in copper and copper alloy thin films10.1063/1.349344 ↗
18. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
19. Printable and flexible copper-silver alloy electrodes with high conductivity and ultrahigh oxidation resistance10.1021/acsami.7b05308 ↗
20. Composition effects on the early-stage oxidation kinetics of (001) Cu–Au alloys10.1063/1.2433714 ↗
21. High-temperature stability of copper nanoparticles through Cu@Ag nanostructures10.1007/s11051-019-4567-5 ↗
22. Oxidation behavior of Cu–Ag core–shell particles for solar cell applications10.1016/j.jallcom.2013.02.048 ↗
23. A microstructural study of preferential oxidation at the grain boundaries of Ni–Cr alloys10.1023/A:1014818117073 ↗
24. Heat-induced spinodal decomposition of Ag-Cu nanoparticles10.1039/C5CP00198F ↗
25. Materials studies of copper oxides obtained by low temperature oxidation of copper sheets10.1016/j.mssp.2020.105368 ↗
26. Facile synthesis of bimetallic Cu-Ag nanoparticles under microwave irradiation and their oxidation resistance10.1088/0957-4484/24/26/265602 ↗
27. Surface oxidation and reduction of CuO and Cu2O studied using XPS and XAES10.1002/(SICI)1096-9918(199611)24:12<811::AID-SIA191>3.0.CO;2-Z ↗
28. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
29. Self-assembled monolayers of alkanethiols on oxidized copper surfaces10.1021/jp992995h ↗
30. Air stable core–shell multilayer metallic nanoparticles synthesized by RAPET: fabrication, characterization and suggested applications10.1039/c2jm32528d ↗
31. Hirth · 1982
32. Microstructure evolution of Cu/Ag interface in the Cu–6wt.% Ag filamentary nanocomposite10.1016/j.actamat.2010.10.052 ↗
33. Swanson · 1953 · 539
34. Intragranular nucleation of tetrahedral precipitates and discontinuous precipitation in Cu-5wt%Ag10.1016/j.actamat.2018.10.055 ↗
35. Investigation of the role of oxygen induced segregation of Cu during Cu2O formation on Cu{100}, Ag/Cu{100} and Cu(Ag) alloy10.1016/j.susc.2005.03.035 ↗
36. CRC handbook of chemistry and physics
37. Oxygen surface diffusion in three-dimensional Cu2O growth on Cu(001) thin films10.1063/1.119220 ↗
38. The homogeneous nucleation mechanism of Cu2O on Cu (001)10.1016/S1359-6462(98)00026-8 ↗
39. Color of copper/copper oxide
40. From nucleation to coalescence of Cu2O islands during in situ oxidation of Cu (001)10.1063/1.1492007 ↗
41. On the growth and electrical characterization of CuO nanowires by thermal oxidation10.1063/1.3187833 ↗
42. Brief review of oxidation kinetics of copper at 350 °C to 1100 °C10.1007/s11661-006-1074-y ↗
43. Improving graphene diffusion barriers via stacking multiple layers and grain size engineering10.1002/adfm.201203179 ↗
44. Oxidation resistance of graphene-coated Cu and Cu/Ni alloy10.1021/nn103028d ↗
45. Oxygen adsorption on Cu(100): first-principles pseudopotential calculations10.1103/PhysRevB.70.245417 ↗
46. The adsorption and dissociation of O2 molecular precursors on Cu: the effect of steps10.1016/S0039-6028(03)00787-8 ↗
47. Phase diagrams for surface alloys10.1103/PhysRevB.56.5822 ↗