Microstructural evolution and oxidation behaviour of CF8A austenitic stainless steel during corrosion fatigue in a simulated pressurised water reactor environment
Source abstract
Abstract
Abstract The microstructural evolution and oxidation behaviour of CF8A stainless steel during corrosion fatigue (CF) crack initiation and propagation were investigated in a simulated pressurised water reactor environment. Under the action of alternating loads, the near-surface properties of the specimens deteriorate due to the formation of Cr-depleted zones and slip bands (SBs), and CF cracks tend to initiate from SBs on the surface of the specimens. As the CF cracks propagate, dynamic interactions are present between the stress state and the oxidation behaviour at the crack tip due to intense anodic dissolution and the redistribution of stresses and strains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Analysis of propagating temperature perturbations in the primary circuit of PWRs10.1016/j.anucene.2015.08.001 ↗
2. Materials challenges for advanced nuclear energy systems
3. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
4. Retarding effect of prior-overloading on stress corrosion cracking of cold rolled 316L SS in simulated PWR water environment10.1016/j.jnucmat.2017.10.005 ↗
5. Environmental fatigue crack propagation behavior of cast stainless steels under PWR condition10.4028/www.scientific.net/KEM.297-300.968 ↗
6. Microstructure of a domestically fabricated dissimilar metal weld joint (SA508-52M-309L-CF8A) in nuclear power plant10.1016/j.matchar.2018.12.011 ↗
7. A mechanistic study of the temperature dependence of the stress corrosion crack growth rate in SUS316 stainless steels exposed to PWR primary water10.1016/j.actamat.2016.05.010 ↗
8. Accelerated test for evaluation of intergranular stress corrosion cracking initiation characteristics of non-sensitized 316 austenitic stainless steel in simulated pressure water reactor environment10.1016/j.corsci.2016.11.019 ↗
9. Effects of chloride and oxygen on stress corrosion cracking of cold worked 316/316L austenitic stainless steel in high temperature water10.1016/j.corsci.2016.04.035 ↗
10. Effects of dissolved hydrogen and surface condition on the intergranular stress corrosion cracking initiation and short crack growth behavior of non-sensitized 316 stainless steel in simulated PWR primary water10.1016/j.corsci.2017.02.003 ↗
11. Effects of water chemistry and loading conditions on stress corrosion cracking of cold-rolled 316NG stainless steel in high temperature water10.1016/j.corsci.2010.09.018 ↗
12. The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment10.1016/j.corsci.2007.08.022 ↗
13. The effect of sensitization and fatigue loading frequency on corrosion fatigue of AA5083-H13110.1016/j.ijfatigue.2019.02.044 ↗
14. Effect of maximum stress intensity factor, loading mode, and temperature on corrosion fatigue cracking behavior of Inconel 617 in supercritical water10.1016/j.ijfatigue.2018.08.035 ↗
15. Effects of normal load on fretting corrosion fatigue of Alloy 690 in 285 °C pure water10.1016/j.corsci.2018.07.010 ↗
16. Effects of temperature on corrosion fatigue behavior of 316LN stainless steel in high-temperature pressurized water10.1016/j.corsci.2018.10.023 ↗
17. Corrosion fatigue crack initiation and initial propagation mechanism of E690 steel in simulated seawater10.1016/j.msea.2017.09.078 ↗
18. Modelling of corrosion fatigue crack initiation on martensitic stainless steel in high cycle fatigue regime10.1016/j.corsci.2018.01.034 ↗
19. Study on the mechanism of high-cycle corrosion fatigue crack initiation in X80 steel10.1016/j.corsci.2011.12.029 ↗
20. Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments10.1016/j.corsci.2010.06.016 ↗
21. Characteristic surface oxide film cracking behavior of a Fe-Ni-Cr Alloy under in-phase and out-of-phase thermo-mechanical fatigue10.1007/s11595-007-6850-z ↗
22. Periodic oxide cracking on Fe2.25Cr1Mo produced by high-temperature fatigue tests with a compression hold10.1007/BF02657319 ↗
23. Changes in electrolytic reaction rates due to elastic stress and stress-induced surface patterns10.1016/j.electacta.2013.08.085 ↗
24. Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: Stress assisted grain boundary oxidation or dynamic embrittlment?10.1016/j.corsci.2018.05.001 ↗
25. Interface morphology development during stress corrosion cracking: part I. Via surface diffusion10.1007/BF02642562 ↗
26. Modelling the electrochemical crack size effect on stress corrosion crack growth rate10.1016/j.corsci.2017.06.016 ↗
27. Failure of metals II: fatigue10.1016/j.actamat.2015.05.050 ↗
28. Interaction of hot corrosion fatigue and load dwell periods on a nickel-base single crystal superalloy10.1016/j.ijfatigue.2018.07.029 ↗
29. Modeling for corrosion fatigue crack initiation life based on corrosion kinetics and equivalent initial flaw size theory10.1016/j.corsci.2018.07.031 ↗
30. TM0274 · 1995
31. Creep-fatigue crack growth behavior of G115 steel under different hold time conditions10.1016/j.ijfatigue.2018.07.010 ↗
32. Corrosion fatigue and microstructural characterisation of Type 316 austenitic stainless steels tested in PWR primary water10.1016/j.corsci.2017.10.022 ↗
33. Corrosion fatigue crack growth behaviour of austenitic stainless steels under light water reactor conditions10.1016/j.corsci.2011.10.005 ↗
34. Stress corrosion cracking behavior of cold-drawn 316 austenitic stainless steels in simulated PWR environment10.1016/j.corsci.2016.08.014 ↗
35. Corrosion behavior of alumina-forming and oxide dispersion strengthened austenitic 316 stainless steel in supercritical water10.1016/j.corsci.2018.04.026 ↗
36. Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water10.1016/j.corsci.2017.06.019 ↗
37. Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining10.1016/j.actamat.2018.04.002 ↗
38. Advanced FIB sample preparation techniques for high resolution TEM investigations of HEMT structures10.1016/j.microrel.2014.07.101 ↗
39. Focused high- and low-energy ion milling for TEM specimen preparation10.1016/j.microrel.2015.07.005 ↗
40. Corrosion fatigue behavior and crack-tip characteristic of 316LN stainless steel in high-temperature pressurized water10.1016/j.jnucmat.2019.02.040 ↗
41. The roles of internal and external hydrogen in the deformation and fracture processes at the fatigue crack tip zone of metastable austenitic stainless steels10.1016/j.scriptamat.2018.08.003 ↗
42. Plane strain deformation near a crack tip in a power-law hardening material10.1016/0022-5096(68)90013-6 ↗
43. Dislocation nucleation from a crack tip: an analysis based on the peierls concept10.1016/S0022-5096(05)80012-2 ↗
44. The effect of deformation twins on the quasi-cleavage crack propagation in twinning-induced plasticity steels10.1016/j.actamat.2018.03.004 ↗
45. Critical temperature determination of detectable Cr diffusion enhancement by nanostructure through structural evolution analysis of the oxide films at 25–450 °C on 304 stainless steel10.1016/j.apsusc.2017.04.133 ↗
46. Effect of irradiation on corrosion of 304 nuclear grade stainless steel in simulated PWR primary water10.1016/j.corsci.2017.08.010 ↗
47. Properties of oxide films formed on 316L SS and model alloys with modified Ni, Cr and Si contents in high temperature water10.1016/j.corsci.2016.02.001 ↗
48. The effect of high-temperature water chemistry and dissolved zinc on the cobalt incorporation on type 316 stainless steel oxide10.1016/j.corsci.2018.05.041 ↗
49. Low valence cation doping of bulk Cr2O3: charge compensation and oxygen vacancy formation10.1021/acs.jpcc.6b05575 ↗
50. The effects of strain and vacancy defects on the electronic structure of Cr2O310.1016/j.commatsci.2017.12.012 ↗
51. Pourbaix Diagrams for the Ternary System of Iron-Chromium-Nickel10.5006/1.3283945 ↗
52. Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: Competing failure modes10.1016/j.actamat.2018.03.035 ↗
53. Gutman · 1989
54. Crack initiation during high cycle fatigue of an austenitic steel10.1016/0956-7151(90)90305-Z ↗
55. Influence of directional strength-to-stiffness on the elastic–plastic transition of fcc polycrystals under uniaxial tensile loading10.1016/j.actamat.2009.11.009 ↗
56. The role of structural defects in the growth of nickel oxide films10.1016/0001-6160(68)90002-3 ↗
57. Stress corrosion cracking characteristics of CF8A austenitic stainless steels and interactions between multiple cracks in a simulated PWR environment10.1016/j.conbuildmat.2019.01.090 ↗
58. Stacking fault energies of seven commercial austenitic stainless steels
59. The influence of crack tip morphology on crack propagation rates in corrosive environments10.1016/0010-938X(81)90074-3 ↗
60. Methods of physical simulation of electrochemical processes at the tip of a crack
61. Mechano-chemical anodic dissolution of austenitic stainless steel in hot chloride solution10.1098/rspa.1962.0142 ↗
62. A comparison of the scaling behavior iron-chromium and nickel-chromium alloys in oxygen10.1016/S0010-938X(66)80004-5 ↗
63. The mechanism and kinetics of corrosion product release from stainless steel in lithiated high temperature water10.1016/0010-938X(87)90068-0 ↗