Tribocorrosion performance of medium-manganese austenitic wear-resistant steel in simulated mine water
Source abstract
Abstract
The tribocorrosion properties of a modified medium-manganese austenitic wear-resistant steel (MMAS) and a wear-resistant steel (Hardox 450) were investigated under simulated mining conditions. The tribocorrosion results show that the wear rate of MMAS is significantly lower than those of Hardox 450. SEM results reveal that fatigue- and impact-corrosion spalling pits appear only in Hardox 450. The improvement of tribocorrosion performance of MMAS is owing to the enhanced surface hardness by strain-induced martensite transformation , good ability to form passive films and uniform corrosion. With the good wear- and corrosion-resistance, MMAS is expected to have an extensive application in various corrosion-wear environments.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels10.1016/j.wear.2014.06.003 ↗
2. Microstructure and abrasive wear behavior of medium carbon low alloy martensitic abrasion resistant steel10.1016/S1006-706X(14)60015-7 ↗
3. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods10.1016/j.wear.2009.08.005 ↗
4. Tribocorrosion behavior of plasma nitrided Hardox steels in NaCl solution10.1016/j.triboint.2018.01.023 ↗
5. Tunnel boring machine collision with an ancient boulder beach during the excavation of the Barcelona city subway L10 line: a case of adverse geology and resulting engineering solutions10.1016/j.enggeo.2015.11.010 ↗
6. Design and development of a novel sliding friction and wear tester with complex working conditions10.1038/s41598-021-86451-4 ↗
7. Case study: Wear analysis of the middle plate of a heavy-load scraper conveyor chute under a range of operating conditions10.1016/j.wear.2017.03.005 ↗
8. Influence of fracture toughness and microhardness on the erosive wear of cermet coatings deposited by thermal spray10.1007/s11661-017-4021-1 ↗
9. A comparison study of wear and fretting fatigue behavior between Cr-alloyed layer and Cr–Ti solid-solution layer10.1007/s40195-016-0449-3 ↗
10. Impact and rolling abrasive wear behavior and hardening mechanism for hot-rolled medium-manganese steel10.1115/1.4038414 ↗
11. Effects of impact energy on the wear resistance and work hardening mechanism of medium manganese austenitic steel10.1007/s40544-017-0158-6 ↗
12. The impact wear-resistance enhancement mechanism of medium manganese steel and its applications in mining machines10.1016/j.wear.2017.01.015 ↗
13. Research on the erosion-corrosion mechanism of 304 stainless steel pipeline of mine water in falling film flow10.1016/j.corsci.2022.110531 ↗
14. Influence of microstructure and manganese sulfides on corrosion resistance of selective laser melted 17-4 PH stainless steel in acidic chloride medium10.1016/j.corsci.2020.108585 ↗
15. Study on the formation of Mn-P coatings with significant corrosion resistance on Q235 carbon steels by adjusting the ratio of phosphorus to manganese10.1016/j.corsci.2020.108960 ↗
16. New insights into the corrosion behaviour of medium manganese steel exposed to a NaCl solution spray10.1016/j.conbuildmat.2020.119908 ↗
17. Pitting corrosion behaviour of austenitic stainless steels–combining effects of Mn and Mo additions10.1016/j.corsci.2008.04.005 ↗
18. Effects of alloying concentration on the aqueous corrosion and passivation of aluminum-manganese-molybdenum concentrated alloys10.1016/j.corsci.2022.110137 ↗
19. Cavitation erosion-corrosion behaviour of Fe-10Cr martensitic steel microalloyed with Zr in 3.5% NaCl solution10.1016/j.corsci.2021.109382 ↗
20. Degradation mechanisms in martensitic stainless steels: Wear, corrosion and tribocorrosion appraisal10.1016/j.triboint.2018.01.036 ↗
21. Exploring the sintering process parameters on erosion-corrosion characteristics of Fe-Cr-Ni steels in artificial mine water10.1016/j.triboint.2019.05.017 ↗
22. Mechanical properties and corrosion–abrasion wear behavior of low-alloy MnSiCrB cast steels containing Cu10.1007/s11661-010-0494-x ↗
23. Effect of chloride and sulfate ions on crevice corrosion behavior of low-pressure steam turbine materials10.1016/j.corsci.2017.12.017 ↗
24. An experimental framework for simulating stress corrosion cracking in cable bolts10.1016/j.tust.2018.03.004 ↗
25. Geochemical controls on the enrichment of fluoride in the mine water of the Shendong mining area, China10.1016/j.chemosphere.2021.131388 ↗
26. Tribological and corrosion behavior of HVOF-sprayed WC-Co-based composite coatings in simulated mine water environments10.1080/10402004.2014.971994 ↗
27. Erosion-corrosion characteristics of spark plasma sintered pure nickel in simulated mine water10.1016/j.triboint.2017.01.018 ↗
28. Fretting wear behaviors of steel wires in coal mine under different corrosive mediums10.1016/j.wear.2011.03.028 ↗
29. Dynamic changes of mechanical properties induced by friction in the Archard wear model10.1016/j.wear.2019.04.004 ↗
30. Density functional theory study on the effect of OH and Cl adsorption on the surface structure of α-Fe2O310.1016/j.comptc.2016.12.009 ↗
31. Effects of solution pH and Cl− on electrochemical behaviour of an Aermet100 ultra-high strength steel in acidic environments10.1016/j.corsci.2011.08.024 ↗
32. Preparation and characterization of the structure and corrosion behavior of wedge mold cast Fe43.2Co28.8B19.2Si4.8Nb4 bulk amorphous alloy10.1016/j.jallcom.2016.05.014 ↗
33. Corrosion behavior of Cr modified HRB400 steel rebar in simulated concrete pore solution10.1016/j.conbuildmat.2015.05.073 ↗
34. Corrosion behavior of low-Cr steel rebars in alkaline solutions with different pH in the presence of chlorides10.1016/j.jelechem.2017.09.016 ↗
35. Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution10.1016/j.apsusc.2016.08.074 ↗
36. Effect of composition and microstructure on electrical properties and CO 2 stability of donor-doped, proton conducting BaCe 1−(x+y) Zr x Nb y O 310.1039/c3ta12668d ↗
37. Organic matter characterization of shale rock by X-ray photoelectron spectroscopy: adventitious carbon contamination and radiation damage10.1021/acs.energyfuels.7b01143 ↗
38. Simultaneous removal of SO 2 and NO from flue gas with OH from the catalytic decomposition of gas-phase H2O2 over solid-phase Fe2(SO4)310.1016/j.cej.2017.08.097 ↗
39. Effect of cold deformation on the corrosion behaviour of UNS S31803 duplex stainless steel in simulated concrete pore solution10.1016/j.corsci.2017.05.021 ↗
40. Efficient one-pot synthesis of n-butyl levulinate from carbohydrates catalyzed by Fe 2 (SO4) 310.1016/j.jechem.2016.11.015 ↗
41. Selective oxidation of glycerol to formic acid catalyzed by Ru (OH) 4/r-GO in the presence of FeCl310.1016/j.apcatb.2014.02.034 ↗
42. MnCl2 doping increases phase stability of tin halide perovskites10.1016/j.mssp.2021.105908 ↗
43. Effects of dissolved oxygen on the start-up of manganese oxides filter for catalytic oxidative removal of manganese from groundwater10.1016/j.cej.2019.03.252 ↗
44. Thermal decomposition of (NH4) 2SO4 in presence of Mn3O410.1016/j.ijhydene.2010.11.011 ↗
45. The development of a finite element model to simulate the sliding interaction between two, three-dimensional, elastoplastic, hemispherical asperities10.1016/S0043-1648(00)00406-3 ↗