Short-term oxidation behavior of 304 stainless steel in N2-21 vol％O2 environment between 900 and 1200 °C
Source abstract
Abstract
Oxidation behavior and microstructure evolution of 304 stainless steel at 900–1200 °C in N 2-21 vol％O 2 were investigated. At 900 °C, Cr 2O 3 protective oxide is formed on the surface of the steel. With the increase in temperature (1100 °C), an inner oxide layer is formed consisting of two phases (Fe, Cr) 3O 4 oxide and remaining Ni-Fe metallic. The oxide scale formed at 1200 °C has a unique morphology consisting of the inner Cr-rich oxidation region, middle gap region, outer porous Fe 3O 4 oxide region, and outermost dense Fe 2O 3 oxide scale. A discontinuous SiO 2 layer appears in the oxide scale.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Comparative mechanical improvement of stainless steel 304 through three methods10.1088/1757-899X/367/1/012023 ↗
2. An evaluation of fracture properties of type-304 austenitic stainless steel at high deformation rate using the small punch test10.1016/j.ijmecsci.2018.05.056 ↗
3. Mechanical behavior of 304 Austenitic stainless steel processed by cryogenic rolling
4. High temperature oxidation behavior of AISI 304 and AISI 430 stainless steels10.1590/S1516-14392006000400009 ↗
5. The influence of implanted yttrium on the cyclic oxidation behaviour of 304 stainless steel10.1016/j.apsusc.2005.05.054 ↗
6. Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steels10.1590/S1516-14392003000200012 ↗
7. Oxidation of AISI 304L stainless steel surface with atomic oxygen10.1016/S0169-4332(02)00647-5 ↗
8. Characterization of the oxides formed at 1000 °C on the AISI 304 stainless steel by X-ray diffraction and infrared spectroscopy10.1016/j.apsusc.2007.09.018 ↗
9. The oxidation of iron-chromium-manganese alloys at 900 °C10.1007/BF00938460 ↗
10. N. Birks, G.H. Meier, F.S. Pettit, Introduction to the High Temperature Oxidation of Metals, Cambridge Univ. Pr. 2006.10.1017/CBO9781139163903 ↗
11. Corrosion properties and mechanisms of austenitic stainless steels and Ni-base alloys in supercritical water containing phosphate, sulfate, chloride and oxygen10.1007/s11085-018-9855-4 ↗
12. Effect of temperature on oxidation resistance and isothermal oxidation mechanism of novel wear-resistant Fe-Cr-B-Al-C-Mn-Si alloy10.1016/j.corsci.2020.108620 ↗
13. High temperature oxidation behaviour of Fe-15.7 wt% Cr-8.5 wt% Mn in oxygen without and with water vapour at 700 °C10.1016/j.corsci.2018.11.023 ↗
14. High temperature oxidation of AISI 430 stainless steel in Ar-H2O at 800 °C10.1016/j.corsci.2020.108489 ↗
15. Oxidation of 310 steel in H2O/O2 mixtures at 600 °C: the effect of water-vapour-enhanced chromium evaporation10.1016/S0010-938X(02)00056-2 ↗
16. Effect of addition of 4% Al on the high temperature oxidation and nitridation of a 20Cr-25Ni austenitic stainless steel10.1007/s11085-014-9503-6 ↗
17. The effect of silicon addition on the high temperature oxidation of a Fe-Cr alloy10.4028/www.scientific.net/MSF.461-464.117 ↗
18. Effect of yttrium on the cyclic oxidation behaviour of HP40 heat-resistant steel at 1373 K10.1016/j.corsci.2010.09.039 ↗
19. Effects of alloyed Si on the oxidation behaviour of Co-29Cr-6Mo alloy for solid-oxide fuel cell interconnects10.1016/j.corsci.2015.02.036 ↗
20. The effects of the minor alloying elements Al, Si and Mn on the cyclic oxidation of Ni-Cr-W-Mo alloys10.1016/j.corsci.2014.02.015 ↗
21. Effect of cold rolling on the oxidation resistance of T91 steel in oxygen-saturated stagnant liquid lead-bismuth eutectic at 450 °C and 550 °C10.1016/j.jnucmat.2016.04.046 ↗
22. Effect of shot peening on high temperature oxidation behaviour of boiler steel: experimental results and simulation10.1179/174327809X419177 ↗
23. Effect of shot peening on the oxidation resistance of TP304H and HR3C steels in water vapor10.1007/s11085-011-9270-6 ↗
24. Effect of surface conditions and alloying elements on the early oxidation behaviour of two austenitic alloys in the pure steam environment10.1016/j.apsusc.2021.150314 ↗
25. Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water10.1016/j.corsci.2011.12.007 ↗
26. The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel10.1016/S0924-0136(03)00785-4 ↗
27. Influence of peening on the corrosion properties of AISI 304 stainless steel10.1016/j.corsci.2009.08.008 ↗
28. Improving the high-temperature oxidation resistance of Fe-18Cr-8Ni austenitic stainless steel by cold-rolling treatments10.1016/j.jmrt.2022.05.121 ↗
29. High temperature oxidation behaviour of AISI 321 stainless steel with an ultrafine-grained surface at 800 °C in Ar-20 vol% O210.1016/j.corsci.2019.108282 ↗
30. Grain-size effects on the high-temperature oxidation of modified 304 austenitic stainless steel10.1007/s11085-012-9347-x ↗
31. Effect of grain size on the oxidation of Fe-13Cr-5Ni alloy at 973 K in Ar-21 vol%O210.1016/j.corsci.2014.11.020 ↗
32. Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air10.1016/j.actamat.2005.07.019 ↗
33. Grain-size effects on the high-temperature oxidation behaviour of chromium steels10.1007/s11085-010-9192-8 ↗
34. The high-temperature oxidation of bulk nanocrystalline 304 stainless steel in air10.1016/j.corsci.2013.03.008 ↗
35. Oxidation of an austenitic stainless steel with or without alloyed aluminum in O2+10% H2O environment at 800 °C10.1016/j.corsci.2017.03.015 ↗
36. High-temperature oxidation behavior of modified 4Al alumina-forming austenitic steel: effect of cold rolling10.1016/j.jmst.2020.08.013 ↗
37. Oxidation of a Fe-18Cr-8Ni austenitic stainless steel at 850 °C in O2: microstructure evolution during breakaway oxidation10.1016/j.corsci.2016.10.029 ↗
38. Oxidation of AISI 304 and AISI 439 stainless steels10.1016/j.msea.2006.10.022 ↗
39. Thermodynamic and kinetics aspects of high temperature oxidation on a 304L stainless steel10.1007/s11085-013-9465-0 ↗
40. Delta ferrite is ubiquitous in type 304 stainless steel: consequences for magnetic characterization10.1016/j.jmmm.2018.02.092 ↗
41. Solidification cracking in austenitic stainless steel welds10.1007/BF02706438 ↗
42. Self-diffusion in austenitic Fe-Cr-Ni alloys10.1088/0305-4608/10/3/009 ↗
43. Effect of Cr and Ni contents on the oxidation behavior of ferritic and austenitic model alloys in air with water vapor10.1023/B:OXID.0000032334.75463.da ↗
44. Oxidation behaviour of Super 304H stainless steel in supercritical water10.1080/1478422X.2018.1459064 ↗
45. The development of silicon-containing oxides during the oxidation of iron-chromium-base alloys10.1002/maco.19870380910 ↗
46. Superior high-temperature oxidation resistance of nanocrystalline 304 austenitic stainless steel containing a small amount of Si10.1016/j.scriptamat.2021.114155 ↗
47. Early stages of scale formation during oxidation of γ/ γ′ strengthened single crystal ternary Co-base superalloy at 900 °C10.1016/j.corsci.2018.02.020 ↗
48. Kinetics-based approach to quantifying the extent of metastable stable phase transformation in thermally-grown Al2O3 scales10.1007/s11085-013-9365-3 ↗
49. Oxidation behaviours of electron beam physical vapour deposition fabricated microcrystalline Ni-23.5Cr-2.66Co-1.44Al superalloy sheet at 1000 °C
50. Transition from the linear to the parabolic rate law during the oxidation of iron to wüstite in CO-CO2 mixtures10.1016/0001-6160(64)90051-3 ↗
51. C. Wagner, Diffusion and High Temperature Oxidation of Metals, Atom Movements, ASM Seminar, Cleveland, 1951.
52. Concentration profiles in the underlying alloy during the oxidation of iron-chromium alloys10.1016/0001-6160(67)90066-1 ↗