journal article·2012-10

Twinned formation in weld metal of titanium bearing nano precipitated high strength steel

Ping-Wei Hsu, Fang-Hsin Kao, Shing-Hoa Wang, Jer-Ren Yang, Horng-Yi Chang, Yao-Ming Wang, Qian-Xuan Lin

Materials Chemistry and Physics· Volume 136· Issue 2-3
Publisher page

Abstract

Abstract The weld metal of titanium-bearing nano precipitated high-strength steel reveals that the allotriomorphic ferrite on the prior austenite grain boundary coarsens with increased welding heat input. Besides the welding penetration with depth-to-width ratio increases with heat input, the solidified weld metal microstructures, depending on various heat inputs, exhibit the microstructure constituents of allotriomorphic ferrite, very little Widmanstatten ferrite, acicular ferrite, and bainite. Dislocations formed and multiplied with higher welding heat-input, in accordance to residual stress induced by the temperature gradient field. The dislocation morphology is intertwined at the highest welding heat-input (3.0 kJ mm−1). Twin martensite forms under different welding heat inputs, and very little TiC re-precipitates in ferrite grains during the welding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Jun · Scripta Mater. · 2003 · 49 · 108110.1016/j.scriptamat.2003.08.013 ↗
2. Onoro · J. Mater. Process. Technol. · 1997 · 68 · 6810.1016/S0924-0136(96)02541-1 ↗
3. Xue · Mater. Sci. Eng. A · 2003 · 354 · 16610.1016/S0921-5093(03)00007-8 ↗
4. Madhusudhan Reddy · J. Mater. Process. Technol. · 1998 · 74 · 2710.1016/S0924-0136(97)00245-8 ↗
5. Madhusudhan Reddy · J. Mater. Process. Technol. · 1996 · 57 · 2310.1016/0924-0136(95)02041-1 ↗
6. Zhang · Mater. Sci. Eng. A · 2002 · 333 · 32010.1016/S0921-5093(01)01857-3 ↗
7. Spanos · Metall. Mater. Trans. · 1995 · 26A · 327710.1007/BF02669455 ↗
8. Honeycombe · 1995
9. Bhadeshia · Acta Metall. · 1985 · 33 · 127110.1016/0001-6160(85)90238-X ↗
10. Svensson · Scand. J. Metall. · 1986 · 15 · 97
11. Yang · Weld. J. · 1990 · 69 · 305s
12. Shome · Metall. Mater. Trans. · 2006 · 37A · 215910.1007/BF02586136 ↗
13. Shi · J. Mater. Process. Technol. · 2008 · 207 · 3010.1016/j.jmatprotec.2007.12.049 ↗
14. Tiz-Pin Wang, Master thesis, National Taiwan Ocean University, 2010.
15. Wang · Mater. Lett. · 2011 · 65 · 39610.1016/j.matlet.2010.10.022 ↗
16. Hsu · Sci. Technol. Weld. Joining · 2011 · 16 · 51410.1179/1362171811Y.0000000038 ↗
17. Ren · Metall. Mater. · 2009 · 16 · 65
18. Beidokhti · Mater. Sci. Eng. A · 2009 · 507 · 16710.1016/j.msea.2008.11.064 ↗
19. Zhao · Mater. Sci. Eng. A · 2003 · 355 · 12610.1016/S0921-5093(03)00074-1 ↗
20. Dallam · Weld. J. · 1989 · 68 · 198s
21. Lee · J. Mater. Process. Technol. · 2007 · 183 · 18310.1016/j.jmatprotec.2006.10.008 ↗
22. Hess · Weld. J. · 1943 · 22 · 377s
23. Poorhadrai · Mater. Sci. Eng. A · 2006 · 435–436 · 37110.1016/j.msea.2006.07.055 ↗
24. Podder · Mater. Sci. Eng. A · 2010 · 527 · 212110.1016/j.msea.2009.11.063 ↗
25. Ikawa · Trans. Jpn. Weld. Soc. · 1980 · 11 · 3