Cut-edge corrosion behavior assessment of newly developed environmental-friendly coating systems using the Scanning Vibrating Electrode Technique (SVET)
Source abstract
Abstract
Abstract Accelerated cut-edge corrosion performance of commercialized full waterborne coating systems containing enviro-friendly corrosion inhibitors was studied on 55 wt% Al, 44 wt% Zn and 1 wt% Si galvanized steel in 5 wt% NaCl solution at ambient temperature via the Scanning Vibrating Electrode Technique (SVET). At the same volume content (7–11 wt%), benzotriazole pigments had a better overall cut-edge corrosion performance than calcium ion exchanged silica pigments. It was due to benzotriazole’s superior cathodic protection of the cut-edge in comparison with calcium silicate. Furthermore, although both enviro-friendly inhibitors did not exhibit the same performance level as the conventional Cr(VI)-containing system, they exhibited promising results in inhibiting cut-edge corrosion in a fully commercialized waterborne coating system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Microstructural changes in zinc aluminium alloy galvanising as a function of processing parameters and their influence on corrosion10.1016/j.corsci.2004.11.011 ↗
2. Studying phosphate corrosion inhibition at the cut edge of coil coated galvanized steel using the SVET and EIS10.1016/j.porgcoat.2010.04.022 ↗
3. Corrosion control of galvanized steel using a phosphate/calcium ion inhibitor mixture10.1016/S0010-938X(02)00130-0 ↗
4. Characterization of black chromate conversion coating on the electrodeposited zinc–iron alloy10.1016/S0169-4332(03)00572-5 ↗
5. Incorporation of Cr in the passive film on Fe from chromate solutions10.1016/S0013-4686(02)00231-1 ↗
6. Evaluation of anti-corrosive pigments by pigment extract studies, atmospheric exposure and electrochemical impedance spectroscopy10.1016/0300-9440(94)00546-D ↗
7. Corrosion inhibition by chromate and phosphate extracts for iron substrates studied by EIS and SVET10.1016/j.corsci.2005.05.021 ↗
8. The influence of the calcium-ion in saline electrode-electrolyte Interfaces, 1 zinc corrosion10.1016/0376-4583(84)90079-7 ↗
9. Effect of calcium ions on pitting corrosion and inhibition performance in CO2 corrosion of N80 steel10.1016/j.corsci.2005.12.002 ↗
10. Corrosion inhibition of zinc by calcium exchanged beidellite clay mineral: a new smart corrosion inhibitor10.1016/j.corsci.2013.10.037 ↗
11. Synthesis and characterization of a new generation of inhibitive pigment based on zinc acetate/benzotriazole: solution phase and coating phase studies10.1016/j.dyepig.2015.07.013 ↗
12. A comparative study of the corrosion protective properties of chromium and chromium free passivation methods10.1016/j.surfcoat.2007.06.001 ↗
13. Cerium (III) inhibition of corrosion driven organic coating delamination studied using a scanning Kelvin probe technique10.1149/1.1457983 ↗
14. A smart coating established with encapsulation of zinc molybdate centred nanocontainer for active corrosion protection of mild steel: release kinetics of corrosion inhibitor10.1080/09276440.2018.1439631 ↗
15. Inhibitory properties of calcium exchanged silica epoxy paintings10.1016/S0010-938X(01)00037-3 ↗
16. Electrochemical impedance study of environmentally friendly pigments in organic coatings10.5006/1.3277540 ↗
17. Mechanisms of non-toxic anticorrosive pigments in organic waterborne coatings10.1016/j.porgcoat.2003.11.001 ↗
18. Specific features of the corrosion inhibition of an aluminium alloy by a nonchromate pigment mixture10.1007/s11003-009-9136-0 ↗
19. Smart release corrosion inhibitor pigments based on organic ion-exchange resins10.1016/j.corsci.2011.12.024 ↗
20. Paint systems formulated with ion-exchange pigments applied on carbon steel: effect of surface preparation10.1016/j.porgcoat.2010.09.035 ↗
21. Anticorrosive behaviour of alkyd paints formulated with ion-exchange pigments10.1016/j.porgcoat.2007.07.033 ↗
22. Determination of suitable corrosion inhibitor formulation for a potable water supply10.1108/00035590410560949 ↗
23. The effect of time evolution and timing of the electrochemical data recording of corrosion inhibitor protection of hot-dip galvanized steel10.1016/j.corsci.2020.108780 ↗
24. The mechanism of the anticorrosive action of calcium-exchanged silica10.1007/BF02699625 ↗
25. Chemical and structural changes of calcium ion exchange silica pigment in 0.5M NaCl and 0.5M Na2SO4 solutions
26. Electrochemistry and surface analysis of the effect of benzotriazole on the cut edge corrosion of galvanized steel10.1016/j.electacta.2010.03.072 ↗
27. Benzotriazole: an overview on its versatile biological behavior10.1016/j.ejmech.2014.09.089 ↗
28. Study of the inhibition ability of benzotriazole on the Zn-Mg coated steel corrosion in chloride electrolyte10.1016/j.corsci.2017.12.025 ↗
29. Inhibition of copper corrosion by 1,2,3-benzotriazole: a review10.1016/j.corsci.2010.05.002 ↗
30. An electrochemical study of the formation of Benzotriazole surface films on copper, zinc and copper-zinc alloys10.1023/A:1017503031045 ↗
31. Impedance and XPS study of benzotriazole films formed on copper, copper–zinc alloys and zinc in chloride solution10.1016/j.corsci.2008.04.016 ↗
32. Effects of organic inhibitors on corrosion of zinc in an aerated 0.5 M NaCl solution10.1016/S0010-938X(00)00174-8 ↗
33. Corrosion inhibition of zinc in tetra-n-butylammonium bromide aerated aqueous solution by benzotriazole and Na3PO410.1016/j.corsci.2010.11.007 ↗
34. Corrosion inhibition of zinc by benzotriazole with an electrochemical quartz crystal microbalance10.1149/1.1556016 ↗
35. Corrosion performance of Zn–Mg–Al coated steel in accelerated corrosion tests used in the automotive industry and field exposures10.1002/maco.201206959 ↗
36. Corrosion mechanisms of Zn(Mg,Al) coated steel: the effect of HCO3− and NH4+ ions on the intrinsic reactivity of the coating10.1016/j.electacta.2014.09.140 ↗
37. Application of EIS to assess the effect of rare earths small addition on the corrosion behaviour of Zn–5% Al (Galfan) alloy in neutral aerated sodium chloride solution10.1016/j.electacta.2008.08.063 ↗
38. Chemistry of the interaction between azole type corrosion inhibitor molecules and metal surfaces10.1016/j.matchemphys.2012.09.030 ↗
39. Organic corrosion inhibitors for aluminum and its alloys in chloride and alkaline solutions: a review10.1016/j.arabjc.2016.08.009 ↗
40. A review of inhibitors for the corrosion of transition metals in aqueous acids10.1016/j.molliq.2018.06.014 ↗
41. Inhibition of filiform corrosion on organic-coated AA2024-T3 by smart-release cation and anion-exchange pigments10.1016/j.electacta.2012.03.002 ↗
42. Polyoligomeric silsesquioxane (POSS)–hydrogenated polybutadiene polyurethane coatings for corrosion inhibition of AA202410.1016/j.porgcoat.2012.08.001 ↗
43. Interlayer intercalation and arrangement of 2-mercaptobenzothiazolate and 1,2,3-benzotriazolate anions in layered double hydroxides: In situ X-ray diffraction study10.1016/j.jssc.2015.10.023 ↗
44. Smart-release inhibition of corrosion driven organic coating failure on zinc by cationic benzotriazole based pigments10.1016/j.corsci.2019.04.005 ↗
45. Sheikholeslami · 2021
46. Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique10.1149/1.2918900 ↗
47. Inhibition of magnesium localised corrosion in chloride containing electrolyte10.1016/j.electacta.2010.03.023 ↗
48. The study of AA2024 de-alloying using luminol electrogenerated chemiluminescence imaging10.1149/2.0481911jes ↗
49. Localized currents and pH distribution studied during corrosion of MA8 Mg alloy in the cell culture medium10.1016/j.corsci.2020.108689 ↗
50. Novel smart and self-healing cerium phosphate-based corrosion inhibitor for AZ31 magnesium alloy10.1016/j.corsci.2020.108648 ↗
51. Localized corrosion of the Mg alloys with inhibitor-containing coatings: SVET and SIET studies10.1016/j.corsci.2015.10.015 ↗
52. A localized approach to study the effect of cerium salts as cathodic inhibitor on iron/aluminum galvanic coupling10.1016/j.corsci.2014.03.026 ↗
53. Mechanistic study on the cut-edge corrosion behaviors of Zn-Al-Mg alloy coated steel sheets in chloride containing environments10.1016/j.corsci.2019.108170 ↗
54. SECM imaging of the cut edge corrosion of galvanized steel as a function of pH10.1016/j.electacta.2014.11.192 ↗