Comparative analysis of the anticorrosive properties of trivalent chromium conversion coatings formed on 2024-T3 and 2024-T351 aluminium alloys
Source abstract
Abstract
The anticorrosive properties of the trivalent chromium process (TCP) coatings were studied for a 2024 aluminium alloy (AA2024) in both T3 and T351 metallurgical states. Better corrosion resistance was measured for the TCP coated AA2024-T3 compared to AA2024-T351, which was clearly related to the surface copper coverage measured after the pre-treatments for the different samples. The differences were explained considering the reactivity of both the S-phase coarse intermetallics (IMCs) and intergranular Cu-rich precipitates during deoxidation.Large S-phase IMCs and numerous intergranular Cu-rich precipitates constituted critical metallurgical parameters for the anticorrosive properties of the TCP coatings
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A.S.M. International · 1990
2. Muster · 2007
3. Hughes · 2011
4. Corrosion of AA2024-T3 part II: co-operative corrosion10.1016/j.corsci.2010.09.030 ↗
5. European Chemical Agency · 2013
6. Matzdorf · 2002
7. Bares · 2013
8. Characterization of trivalent chromium process coating on AA2024-T310.1016/j.surfcoat.2012.03.046 ↗
9. A Zr- and Cr(III)-containing conversion coating on Al alloy 2024-T3 and its self-repairing behavior10.1002/maco.201609067 ↗
10. Influence of the alloy microstructure and surface state on the protective properties of trivalent chromium coatings grown on a 2024 aluminium alloy10.1016/j.surfcoat.2018.03.046 ↗
11. Mapping the initial corrosion activity of aluminium alloy 2024‐T3 in diluted substitute ocean water by localized electrochemical impedance spectroscopy10.1002/maco.201810109 ↗
12. How complex is the microstructure of AA2024-T3?10.1016/j.corsci.2009.05.001 ↗
13. A consistent description of intermetallic particle composition: an analysis of ten batches of AA2024-T310.1002/sia.5207 ↗
14. Characterization of intergranular corrosion defects in a 2024 T351 aluminium alloy10.1016/j.corsci.2017.02.020 ↗
15. Influence of the microstructure on the corrosion behaviour of 2024 aluminium alloy coated with a trivalent chromium conversion layer10.1016/j.corsci.2018.07.007 ↗
16. Hatch · 1984
17. The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy10.1016/S0010-938X(97)86099-4 ↗
18. Corrosion behavior of commercial aluminum alloy processed by equal channel angular pressing10.1155/2013/983261 ↗
19. Effect of hot extrusion and subsequent T6 treatment on the microstructure evolution and tensile properties of an Al-6Si-2Cu-0.5Mg alloy10.1016/j.msea.2017.10.052 ↗
20. The study of AA2024 de-alloying using luminol electrogenerated chemiluminescence imaging10.1149/2.0481911jes ↗
21. Influence of surface pretreatments on the quality of trivalent chromium process coatings on aluminum alloy10.1016/j.apsusc.2017.06.246 ↗
22. Influence of copper on trivalent chromium conversion coating formation on aluminum10.1149/2.0261712jes ↗
23. Experimental and modeling studies of the oxygen reduction reaction on AA2024-T310.1149/1.1949047 ↗
24. Effect of surface pretreatment on the underpaint corrosion of AA2024-T3 at various temperatures10.5006/1.3280663 ↗
25. Formation of a trivalent chromium conversion coating on AA2024-T351 alloy10.1149/2.0771602jes ↗
26. Evaluation of modified zirconium/trivalent chromium conversion coatings by accelerated corrosion and electrochemical techniques
27. Trivalent chromium conversion coating formation on aluminium10.1016/j.surfcoat.2015.09.024 ↗
28. Copper accumulation during cleaning of Al-Cu alloys
29. Effect of copper content on chromate conversion coating protection of 7xxx-T6 aluminum alloys10.5006/1.3287823 ↗
30. Copper accumulation during cleaning of Al–Cu alloys
31. Investigation of dealloying of S phase (Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging10.1016/j.corsci.2015.11.013 ↗
32. Corrosion of AA2024-T3 part I: localised corrosion of isolated IM particles10.1016/j.corsci.2010.09.009 ↗
33. Study of localized corrosion in AA2024 aluminium alloy using electron tomography10.1016/j.corsci.2012.02.001 ↗
34. Influence of post-treatment time of trivalent chromium protection coating on aluminium alloy 2024-T3 on improved corrosion resistance10.1016/j.surfcoat.2019.04.051 ↗
35. Influence of copper on the morphology of porous anodic alumina10.1016/j.corsci.2005.10.017 ↗
36. Influence of pre- and post-treatments on formation of a trivalent chromium conversion coating on AA2024 alloy10.1016/j.tsf.2016.08.044 ↗
37. Size-dependent role of S phase in pitting initiation of 2024Al alloy10.1016/j.corsci.2016.01.016 ↗
38. Probing corrosion initiation at interfacial nanostructures of AA2024-T310.1016/j.corsci.2016.12.006 ↗
39. Role of microstructure in corrosion initiation of a highly-deformed AA2024 wire10.1016/j.corsci.2018.08.052 ↗
40. Nucleation and growth mechanisms of trivalent chromium conversion coatings on 2024-T3 aluminium alloy10.1016/j.corsci.2019.04.035 ↗
41. Identification of the metallurgical parameters explaining the corrosion susceptibility in a 2050 aluminium alloy10.1016/j.corsci.2015.10.020 ↗