Proton irradiation effects on the electron work function, corrosion and hardness of austenitic stainless steel phases
Source abstract
Abstract
Abstract The effects of proton irradiation on the electron work function of the 308 L austenitic stainless steel weld metal were investigated by scanning Kelvin probe force microscopy. The electron work function of ferrite increased, while austenite decreased after proton irradiation on the irradiated surface. The electron work function of the two phases decreased with irradiation depth. Softening of austenite and hardening of ferrite by irradiation with an obvious boundary between the irradiated and unirradiated regions on the polished cross-section surface were measured by nanoindentation. The corrosion morphology was consistent with the electron work function measured in the cross-section.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Changes in surface morphology and work function caused by corrosion in aluminum10.1016/j.jpcs.2012.01.025 ↗
2. Correlation between electron work functions of multiphase Cu-8Mn-8Al and de-alloying corrosion10.1016/j.apsusc.2018.01.018 ↗
3. Understanding the corrosion behavior of isomorphous Cu-Ni alloy from its electron work function10.1016/j.matchemphys.2016.02.009 ↗
4. Variations of functions and corrosion behaviors of deformed copper surfaces10.1016/j.apsusc.2004.07.017 ↗
5. Environmentally assisted crack growth in 308L stainless steel weld metal in simulated primary water10.1016/j.corsci.2016.12.011 ↗
6. Effect of surface state on the oxidation behavior of welded 308L in simulated nominal primary water of PWR10.1016/j.apsusc.2015.02.066 ↗
7. Irradiation-induced segregation at phase boundaries in austenitic stainless steel weld metal10.1016/j.scriptamat.2018.01.033 ↗
8. Effects of neutron-irradiation-induced intergranular phosphorus segregation and hardening on embrittlement in reactor pressure vessel steels10.1016/j.actamat.2008.05.026 ↗
9. Effect of neutron flux on the characteristics of irradiation-induced nanofeatures and hardening in pressure vessel steels10.1016/j.actamat.2015.11.027 ↗
10. Current understanding of radiation-induced degradation in light water reactor structural materials10.1080/00223131.2013.772448 ↗
11. Influences of interstitial and extrusion temperature on grain boundary segregation, Y-Ti-O nanofeatures, and mechanical properties of ferritic steels10.1016/j.actamat.2018.04.046 ↗
12. Effects of proton irradiation on nanocluster precipitation in ferritic steel containing fcc alloying additions10.1016/j.actamat.2012.02.008 ↗
13. Radiation-induced segregation in desensitized type 304 austenitic stainless steel10.1016/j.jnucmat.2011.06.024 ↗
14. Irradiation-induced microchemical changes in highly irradiated 316 stainless steel10.1016/j.jnucmat.2015.11.035 ↗
15. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
16. Radiation-induced segregation and phase stability in ferritic-martensitic alloy T 9110.1016/j.jnucmat.2010.12.052 ↗
17. Segregation behavior in proton- and heavy-ion-irradiated ferritic–martensitic alloys10.1016/j.actamat.2011.03.070 ↗
18. Radiation-induced solute segregation in metallic alloys10.1016/j.cossms.2015.11.001 ↗
19. Radiation-induced segregation on defect clusters in single-phase concentrated solid-solution alloys10.1016/j.actamat.2017.01.019 ↗
20. Was · 2017
21. Surface segregation and its relation to grain boundary segregation10.1080/14786437508226543 ↗
22. Study of nobility of chromium nitrides in isothermally aged duplex stainless steels by using SKPFM and SEM/EDS10.1016/j.corsci.2009.08.057 ↗
23. Study of the tribocorrosion behaviors of albumin on a cobalt-based alloy using scanning Kelvin probe force microscopy and atomic force microscopy10.1016/j.elecom.2016.01.015 ↗
24. Effect of annealing temperature on the corrosion behavior of duplex stainless steel studied by in situ techniques10.1016/j.corsci.2011.07.019 ↗
25. AFM study of austeno-ferritic stainless steel microstructure after cathodic hydrogen charging10.1016/j.jallcom.2005.02.084 ↗
26. Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS10.1016/j.corsci.2009.05.012 ↗
27. Scanning Kelvin probe force microscopy study of chromium nitrides in 2507 super duplex stainless steel—implications and limitations10.1016/j.electacta.2010.08.038 ↗
28. Duplex stainless steel passive film electrical properties studied by in situ current sensing atomic force microscopy10.1016/j.corsci.2013.08.031 ↗
29. Surface preparation effect on duplex stainless steel passive film electrical properties studied by in situ CSAFM10.1557/jmr.2015.245 ↗
30. Effect of irradiation on corrosion of 304 nuclear grade stainless steel in simulated PWR primary water10.1016/j.corsci.2017.08.010 ↗
31. Deformation microstructure of proton-irradiated stainless steels10.1016/j.jnucmat.2006.12.012 ↗
32. The effects of proton irradiation on the microstructural and mechanical property evolution of Inconel X-750 with high concentrations of helium10.1016/j.jnucmat.2017.04.045 ↗
33. The mechanism of hydrogen-induced pitting corrosion in duplex stainless steel studied by SKPFM10.1016/j.corsci.2012.04.010 ↗
34. Water adsorption behavior on metal surfaces and its influence on surface potential studied by in situ SPM10.1016/j.apsusc.2012.06.003 ↗
35. A Kelvin probe force microscopy study of hydrogen insertion and desorption into 2024 aluminum alloy10.1016/j.jallcom.2017.06.143 ↗
36. Studies of the nobility of phases using scanning Kelvin probe microscopy and its relationship to corrosion behaviour of Ni–Al bronze in chloride media10.1016/j.corsci.2014.11.039 ↗
37. In situ detection of differences in the electrochemical activity of Al2Cu IMPs and investigation of their effect on FFC by scanning Kelvin probe force microscopy10.1016/j.corsci.2012.02.006 ↗
38. An improved technique for determining hardness and elastic moduli using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Ferrite and austenite phase identification in duplex stainless steel using SPM techniques10.1016/j.apsusc.2013.09.041 ↗
40. Mechanism of (Mg,Al,Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion10.1016/j.corsci.2012.09.044 ↗
41. Effects of non-metallic inclusions on the initiation of pitting corrosion in 11% Cr ferritic stainless steel examined by micro-droplet cell10.1016/j.corsci.2006.08.017 ↗
42. Proton irradiation for radiation-induced changes in microstructures and mechanical properties of austenitic stainless steel10.1016/j.jnucmat.2018.11.017 ↗
43. Characterization of ion irradiation effects on the microstructure, hardness, deformation and crack initiation behavior of austenitic stainless steel:heavy ions vs protons10.1016/j.jnucmat.2018.01.013 ↗
44. Irradiation damage in 304 and 316 stainless steels: experimental investigation and modeling. Part II: Irradiation induced hardening10.1016/j.jnucmat.2003.12.008 ↗
45. Effect of irradiation defects on the work hardening behavior10.1016/j.scriptamat.2003.11.029 ↗
46. Nanoindentation and in situ microcompression in different dose regimes of proton beam irradiated 304 SS10.1016/j.jnucmat.2017.01.036 ↗
47. Investigation of the oxide film on 308L weld surface produced during welding process10.1016/j.matchar.2018.09.011 ↗
48. Carburization effects on the corrosion of Cr, Fe, Ni, W, and Mo in fluoride-salt cooled high temperature reactor (FHR) coolant10.1016/j.anucene.2018.05.013 ↗
49. Standard electrode potentials of the elements as a fundamental periodic property of atomic number10.1016/j.electacta.2007.03.022 ↗
50. Effects of alloying elements on the mechanical properties and corrosion behaviors of 2205 duplex stainless steels10.1361/105994901770345268 ↗
51. Controls of chromium and third element contents in nickel-base alloys for corrosion resistant alloys in hot HNO3-HF mixtures10.1016/j.jallcom.2010.06.175 ↗
52. In situ TEM study of G-phase precipitates under heavy ion irradiation in CF8 cast austenitic stainless steel10.1016/j.jnucmat.2015.04.042 ↗
53. Effect of heavy ion irradiation on microstructural evolution in CF8 cast austenitic stainless steel10.1016/j.jnucmat.2015.08.032 ↗
54. The microstructure and associated tensile properties of irradiated fcc and bcc metals10.1016/S0022-3115(99)00203-2 ↗
55. Riviere · 1969 · Vol.1
56. Work functions of the elements10.1063/1.323539 ↗
57. Experimental study on the diffusion of hydrogen along individual grain boundaries in nickel10.1016/j.elecom.2018.05.012 ↗
58. Methodology for determining void swelling at very high damage under ion irradiation10.1016/j.jnucmat.2016.05.026 ↗
59. The influence of hydrogen on void swelling in fusion reactor materials10.1016/0022-3115(88)90431-X ↗