Permeating hydrogen generated from the elemental sulfur corrosion of low carbon steel
Source abstract
Abstract
Permeating hydrogen generated from the elemental sulfur corrosion of low carbon steel was investigated using a double cell system and its effect on the mechanical properties of steel was also discussed. Results show that elemental sulfur corrosion of low carbon steel is accompanied by significant hydrogen permeation, e. g., permeating hydrogen current reaches 12.3 μA/cm 2 in CO 2 -containing environment at 80 °C. The hydrogen permeation process are greatly affected by the structure and composition of the corrosion product, the environmental temperature and gas composition. This permeating hydrogen enhances the brittleness of the low carbon steel and tends to cause hydrogen-induced cracking.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Problems associated with sour gas in the oilfield industry and their solutions10.1021/acs.energyfuels.5b00952 ↗
2. Electrochemical corrosion behavior of carbon steel under dynamic high pressure H2S/CO2 environment10.1016/j.corsci.2012.08.007 ↗
3. Determination of elemental sulfur deposition rates for different natural gas compositions10.1016/j.petrol.2015.10.011 ↗
4. Effect of flow velocity on pipeline steel corrosion behavior in H2S/CO2 environment with sulfur deposition10.1080/1478422X.2018.1476818 ↗
5. Corrosion of iron and steel by aqueous suspensions of sulfur
6. The corrosion of carbon steel by wet elemental sulfur10.1016/S0010-938X(78)80037-7 ↗
7. Hydrolysis of elemental sulfur in water and its effect on the corrosion of mild steel10.1179/000705982798274336 ↗
8. Effect of elemental sulfur on corrosion in sour gas systems10.5006/1.3585257 ↗
9. Effect of environmental factors on downhole sour gas corrosion
10. Interactive effects of H2S and elemental sulfur on corrosion of steel
11. Hydrogen embrittlement during the corrosion of steel by wet elemental sulfur10.1016/0010-938X(95)00088-2 ↗
12. Effect of elemental sulfur and sulfide on the corrosion behavior of Cr-Mo low alloy steel for tubing and tubular components in oil and gas industry10.3390/ma10040430 ↗
13. Investigation of elemental sulfur corrosion mechanisms
14. Stress corrosion cracking of L360NS pipeline steel in sulfur environment10.1016/j.petlm.2017.03.006 ↗
15. Hydrogen induced cracking (HIC) testing of low alloy steel in sour environment: Impact of time of exposure on the extent of damage10.1016/j.corsci.2009.11.044 ↗
16. Effect of hydrostatic pressure on the corrosion behaviour of Ni-Cr-Mo-V high strength steel10.1016/j.corsci.2010.04.025 ↗
17. Effect of immersion time on the hydrogen content and tensile properties of A350LF2 steel exposed to hydrogen sulphide environments10.1016/j.corsci.2012.11.038 ↗
18. Hydrogen as a carrier of renewable energies toward carbon neutrality: State-of-the-art and challenging issues10.1007/s12613-022-2449-9 ↗
19. Hydrogen effect on phase angle shift in electrochemical impedance spectroscopy during corrosion fatigue crack emanation10.1016/j.ijhydene.2021.09.205 ↗
20. Hydrogen embrittlement of X80 pipeline steel in H2S environment: Effect of hydrogen charging time, hydrogen-trapped state and hydrogen charging-releasing-recharging cycles10.1007/s12613-019-1870-1 ↗
21. Welding heat input effect on the hydrogen permeation in the X80 steel welded joints10.1016/j.matchemphys.2011.11.036 ↗
22. Synergistic effect of erosion and hydrogen on properties of passive film on 2205 duplex stainless steel10.1016/j.jmst.2020.08.004 ↗
23. Internal and surface damage of multiphase steels and pure iron after electrochemical hydrogen charging10.1016/j.corsci.2011.05.060 ↗
24. Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas10.1016/j.ijhydene.2016.06.259 ↗
25. Hydrogen permeation and corrosion behavior of high strength steel MCM 430 in cyclic wet–dry SO2 environmen10.1016/S0010-938X(03)00141-0 ↗
26. Electrochemical corrosion, hydrogen permeation and stress corrosion cracking behavior of E690 steel in thiosulfate-containing artificial seawater10.1016/j.corsci.2018.08.048 ↗
27. Effects of environmental conditions on hydrogen permeation of X52 pipeline steel exposed to high H2S-containing solutions10.1016/j.corsci.2014.07.061 ↗
28. Electrochemical impedance spectroscopy of iron corrosion in H2S solutions10.1016/j.electacta.2018.06.052 ↗
29. Effect of sulfate-reducing bacteria on hydrogen permeation and stress corrosion cracking behavior of 980 high-strength steel in seawater10.1016/j.jmst.2021.02.039 ↗
30. Sulfur-bearing capacity of hydrogen sulfide gas10.2118/5669-PA ↗
31. Corrosion tests of nickel coatings prepared from a Watts-type bath10.1007/s11998-011-9343-0 ↗
32. NACE Standard RP0775–99 Item No.21017, Preparation, Installa-tion, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations. (1999).
33. GB/T 228.1, Chinese National Standard for Tensile Stress-Strain Test. (2010).
34. Structural and gas sensing properties of greigite (Fe3S4) and pyrrhotite (Fe1−xS) nanoparticles10.1016/j.matchemphys.2017.06.012 ↗
35. Effect of aqueous Fe (II) on Sb (V) sorption on soil and goethite10.1016/j.chemosphere.2015.12.078 ↗
36. Pyrite FeS2 nanobelts as high-performance anode material for aqueous pseudo capacitor10.1016/j.electacta.2016.10.181 ↗
37. Descostes · Appl. Surf. Sci. · 2000 · 165 · 28810.1016/S0169-4332(00)00443-8 ↗
38. Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds10.1002/sia.1984 ↗
39. Compositional and structural alteration of pyrrhotite surfaces in solution: XPS and XRD studies10.1016/0169-4332(92)90382-8 ↗
40. Oxidation of pyrite surfaces: A photoelectron spectroscopic study10.1016/0169-4332(93)90007-X ↗
41. Preparation and characterization of ultramarine blue pigments from fly ash by using the X-ray photoelectron spectroscopy (XPS) for the determination of chemical states of sulphur in chromophores10.1016/j.micromeso.2019.04.039 ↗
42. Photo corrosion of cadmium sulfide: analysis by photoelectron spectroscopy10.1016/0169-4332(87)90152-8 ↗
43. XPS study of the reaction of chromium (VI) with mackinawite (FeS)10.1002/sia.1303 ↗
44. X-ray photoelectron spectra of crystal and thin film cadmium sulphide
45. Comparative XPS study between experimentally and naturally weathered pyrites10.1016/j.apsusc.2009.06.028 ↗
46. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
47. Exploiting XPS for the identification of sulfides and polysulfides10.1039/C5RA14915K ↗
48. Structural, acidic and redox properties of V2O5-TiO2-SO42- catalysts10.1016/j.apcata.2007.09.023 ↗
49. Effect of sulfate-reducing bacteria and cathodic potential on stress corrosion cracking of X70 steel in sea-mud simulated solution10.1016/j.msea.2018.02.007 ↗
50. Concept of the occluded corrosion cell10.5006/0010-9312-26.8.349 ↗
51. The study of under deposit corrosion of carbon steel in the flowback water during shale gas production10.1016/j.apsusc.2020.146534 ↗
52. Study of the electrochemical permeation of hydrogen in iron10.1016/j.corsci.2008.10.024 ↗
53. A study on the influential factors of stress corrosion cracking in C110 casing pipe10.3390/ma15030801 ↗
54. Hydrogen-induced cracking behaviors of Incoloy alloy 82510.1007/s12613-010-0110-5 ↗