Corrosion fatigue damage mechanism and life evaluation of Inconel Alloy 690TT steam generator tube in high temperature pressurized water
Source abstract
Abstract
Corrosion fatigue behavior of the actual Alloy 690TT steam generator (SG) tubes in high temperature water were systematically studied by using the designed boat-shaped specimen. Results demonstrated that the environmental fatigue correction coefficient of the SG tube in high temperature water was lower than that of round bar specimen in ANL model, which may be related to the internal surface oxide film rupture-persistent slip bands (PSBs) deformation zone preferential dissolution caused by the shape effect of SG tube. Moreover, the corrosion fatigue life of the actual SG tube was evaluated by the method of model correction.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Statistical modeling of fatigue crack growth rate in Inconel alloy 60010.1016/j.ijfatigue.2006.07.013 ↗
2. An investigation of the fatigue crack growth behavior of INCONEL 69010.1016/j.msea.2005.09.101 ↗
3. The effect of dissolved oxygen on fatigue behavior of alloy 690 steam generator tubes in borated and lithiated high temperature water10.1016/j.corsci.2015.10.032 ↗
4. Effects of dissolved oxygen on corrosion fatigue cracking of Alloy 690(TT) in pressurized water reactor environments10.1016/j.ijfatigue.2014.12.007 ↗
5. Low cycle fatigue behavior of alloy 690 in simulated PWR water-effects of dynamic strain aging and hydrogen10.1016/j.msea.2014.05.069 ↗
6. O.K. Chopra, W.J. Shack. Effect of LWR Coolant Environments on Fatigue Life of Reactor Materials. NUREG/CR-6909, ANL-06/08 (2007).
7. Environmental fatigue evaluation method for nuclear power plants, JNES-SS-1005, 2011.
8. Influence of cyclic strain rate on environmentally assisted cracking behavior of pressure vessel steel in high-temperature water10.1016/j.msea.2004.02.051 ↗
9. Corrosion fatigue crack growth behaviour of austenitic stainless steels under light water reactor conditions10.1016/j.corsci.2011.10.005 ↗
10. In-air and pressurized water reactor environment fatigue experiments of 316 stainless steel to study the effect of environment on cyclic hardening10.1016/j.jnucmat.2016.01.034 ↗
11. Synergistic effect of mechanical and environmental damages of 316LN stainless steel under different fatigue strain amplitudes in high-temperature pressurized water10.1016/j.msea.2018.11.081 ↗
12. US NRC Regulatory Guide 1.207, Guidelines for Evaluating Fatigue Analyses Incorporating the Life Reduction of Metal Components due to the Effect of the Light-water Reactor Environment for New Reactors, US-NRC, Washington DC, USA, March 2007.
13. The response of alloy 690 tubing in pressurized water reactor environment10.1016/j.matdes.2005.10.001 ↗
14. An investigation of the fatigue crack growth behavior of INCONEL 69010.1016/j.msea.2005.09.101 ↗
15. Fatigue crack initiation and propagation behavior of Inconel Alloy 690TT steam generator tube10.1016/j.msea.2021.141090 ↗
16. Cyclic deformation behavior and cracking mechanism of Inconel Alloy 690TT steam generator tube at elevated temperature10.1016/j.matchar.2022.111935 ↗
17. Fatigue life prediction of steam generator tubes by tube specimens with circular holes10.3390/met9030322 ↗
18. Low cycle fatigue behavior of steam generator tubes under axial loading10.3390/ma11101944 ↗
19. Corrosion fatigue behavior of Alloy 690 steam generator tube in borated and lithiated high temperature water10.1016/j.corsci.2014.08.027 ↗
20. High cycle fatigue behavior and numerical evaluation of Alloy 690TT steam generator tube10.1016/j.ijfatigue.2020.105662 ↗
21. Initiation and early growth mechanisms of corrosion fatigue cracks in stainless steels10.1007/BF01103528 ↗
22. Corrosion fatigue behavior of FV520B steel in water and salt-spray environments10.1016/j.engfailanal.2017.05.012 ↗
23. A microscopic study on the corrosion fatigue of ultra-fine grained and conventional Al–Mg alloy10.1016/j.corsci.2015.01.020 ↗
24. Effect of sigma phase on the low cycle fatigue property of Z3CN20.09M cast duplex stainless steel in high temperature water10.1002/maco.201407721 ↗
25. Role of welding residual strain and ductility dip cracking on corrosion fatigue behavior of Alloy 52/52M dissimilar metal weld in borated and lithiated high-temperature water10.1016/j.jmst.2019.10.012 ↗
26. Effect of grain boundary engineering on corrosion fatigue behavior of 316LN stainless steel in borated and lithiated high-temperature water10.1016/j.corsci.2019.01.036 ↗
27. Effect of hydride precipitation on the fatigue cracking behavior in a zirconium alloy cladding tube10.1016/j.ijfatigue.2019.105230 ↗
28. Effect of scratch depth on high cycle fatigue behavior of Alloy 690TT stream generator tube10.1016/j.jnucmat.2021.153400 ↗
29. Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy10.1016/j.actamat.2021.117179 ↗
30. The anisotropy of fatigue crack nucleation in an AA7075 T651 Al alloy plate10.1016/j.msea.2014.11.007 ↗
31. Internal oxidation of alloy 690 in hydrogenated steam10.1016/j.corsci.2014.11.006 ↗
32. Oxide properties of deformed Alloy 690TT in caustic solution at high temperature10.1016/j.corsci.2020.108806 ↗
33. The mechanism of oxide film formation on Alloy 690 in oxygenated high temperature water10.1016/j.corsci.2011.07.038 ↗
34. Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environment10.1016/j.corsci.2010.06.016 ↗
35. Changes in the surface compositions of Fe-Cr alloys caused by heating in a high vacuum10.1016/S0010-938X(78)80083-3 ↗
36. X-ray photoelectron spectroscopy and scanning tunneling microscopy study of passive films formed on (100) Fe-18Cr-13Ni single-crystal surfaces10.1149/1.1838366 ↗
37. Microstructural characteristics of Alloy 690TT subjected to fretting corrosion in high temperature water10.1016/j.corsci.2017.04.009 ↗
38. Microstructural evolution and oxidation behaviour of CF8A austenitic stainless steel during corrosion fatigue in a simulated pressurised water reactor environment10.1016/j.corsci.2019.108286 ↗
39. Effects of strain rate on low-cycle fatigue crack growth behavior of 316LN weld metal in high-temperature pressurized water10.1016/j.corsci.2022.110169 ↗
40. Study on corrosion fatigue behavior and mechanism of 6005A aluminum alloy and welded joint10.1108/ACMM-04-2021-2471 ↗
41. Corrosion fatigue crack growth behavior of 316NG heat affected zone in simulated pressurized water reactor environment10.1016/j.jnucmat.2020.152259 ↗
42. Corrosion fatigue tests in synthetic seawater with constant temperature liquid circulating system10.1016/j.ijfatigue.2020.105542 ↗
43. Corrosion fatigue behavior of additively manufactured biodegradable porous zinc10.1016/j.actbio.2020.02.001 ↗
44. Corrosion fatigue crack growth behavior of alloy 52 M in high-temperature water
45. E.M. Gutman. Mechanochemistry of solid surfaces. New Jersey: World. Scientific Public, 1994.10.1142/2373 ↗
46. O.K. Chopra, G. Garud. Update of nuclear NUREG/CR-6909 methodology for environmentally assisted fatigue (EAF)-revised Fen expressions, ASME Code Meetings, Section III Subgroup on Fatigue Strength, Nashville, TN, 2012.
47. Fatigue and crack growth: environmental effects, modeling studies, and design considerations
48. Strain-amplitude dependent fatigue resistance of low-alloy pressure vessel steels in high-temperature water10.1007/s10853-005-1216-4 ↗
49. Effects of loading factors on environmental fatigue behavior of low-alloy pressure vessel steels in simulated BWR water10.1016/j.nucengdes.2006.09.043 ↗
50. Synergistic effect of mechanical and environmental damages of 316LN stainless steel under different fatigue strain amplitudes in high-temperature pressurized water10.1016/j.msea.2018.11.081 ↗