Effect of long-term aging treatment on the structure and oxidation resistance of Cr coatings under high-temperature steam
Source abstract
Abstract
Cr coatings were deposited on Zr-4 tubes by arc ion plating to explore the effect of different aging treatment times at low temperature on the steam oxidation performance of Cr coatings. The intrinsic relationship between the coating grain evolution and oxidation behavior after different aging times was analyzed by EBSD. The mid-term aging treatment improve the oxidation resistance of the Cr coating. After long-term aging treatment, a significant amount of Cr 2O 3 in the grain boundaries close to the Zr-4 substrate preferentially reacts with Zr, which is the reason for the serious degradation of the performance of the Cr coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Interface stability and microstructural evolution of the (Cr/CrN)24-coated zirconium alloy under different thermal shock temperatures10.1016/j.surfcoat.2021.127947 ↗
2. Current status of materials development of nuclear fuel cladding tubes for light water reactors10.1016/j.nucengdes.2017.02.031 ↗
3. Insights from review and analysis of the Fukushima Dai-ichi accident10.1080/18811248.2011.636538 ↗
4. Accident tolerant fuel cladding development: Promise, status, and challenges10.1016/j.jnucmat.2017.12.043 ↗
5. Nuclear fuel in a reactor accident10.1126/science.1211285 ↗
6. Safety cases for design-basis accidents in LWRs featuring passive systems Part 2 – Numerical investigations10.1016/j.nucengdes.2020.110996 ↗
7. Characterization of Kanthal APMT and T91 oxidation at beyond design-basis accident temperatures10.1016/j.corsci.2020.108598 ↗
8. Study on containment pressure response with passive containment cooling system performance under design basis accident10.1016/j.pnucene.2016.10.002 ↗
9. Accident tolerant fuels for LWRs: A perspective10.1016/j.jnucmat.2013.12.005 ↗
10. Fantastic behavior of near zero wear of Cr-based coatings10.1016/j.matlet.2022.132228 ↗
11. Cold sprayed Cr-coating on Optimized ZIRLO™ claddings: the Cr/Zr interface and its microstructural and chemical evolution after autoclave corrosion testing10.1016/j.jnucmat.2022.153505 ↗
12. Microstructure and high-temperature steam oxidation properties of thick Cr coatings prepared by magnetron sputtering for accident tolerant fuel claddings: The role of bias in the deposition process10.1016/j.corsci.2019.108378 ↗
13. Long-term high-temperature steam oxidation behavior of Cr-coated Zircaloy-4 alloy for accident tolerant fuel10.1002/maco.202213307 ↗
14. High temperature, low neutron cross-section high-entropy alloys in the Nb-Ti-V-Zr system10.1016/j.actamat.2019.01.006 ↗
15. Design of single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements for nuclear power plant application10.1016/j.intermet.2018.11.001 ↗
16. Systematic investigations on the coating degradation mechanism during the steam oxidation of Cr-coated Zry-4 at 1200 °C10.1016/j.corsci.2022.110310 ↗
17. Caroline Toffolon-Mascleta, Matthieu Le Sauxa,b, Nihed Chaabanec, Hervé Palancherd, Amandine Davide, Jérémy Bischofff, Julien Augereaug, Edouard Pouillierh, High temperature steam oxidation of chromium-coated zirconium-based alloys: Kinetics and process
18. Effect of the 345 °C and 16.5 MPa autoclave corrosion on the oxidation behavior of Cr-coated zirconium claddings in the high-temperature steam10.1016/j.corsci.2021.109608 ↗
19. Effect of long-term aging treatment on the tensile strength and ductility of GH 605 superalloy10.1016/j.pnsc.2022.05.002 ↗
20. Effect of long-term aging on microstructure and local behavior in the heat-affected zone of a Ni–Cr–Mo–V steel welded joint10.1016/j.matchar.2013.10.026 ↗
21. Aluminum suppression of α′ precipitate in model Fe-Cr-Al alloys during long-term aging at 475 °C10.1016/j.msea.2019.138714 ↗
22. Microstructure, corrosion resistance and oxidation behavior of Cr-coatings on Zircaloy-4 prepared by vacuum arc plasma deposition10.1016/j.corsci.2019.06.029 ↗
23. XPS characterization of passive films formed on Type 304 stainless steel in humid atmosphere10.1016/j.corsci.2012.01.006 ↗
24. Influences of arc current on microstructure of Cr coating for Zr-4 alloy prepared by multi-arc ion plating via EBSD10.1016/j.matchar.2021.111211 ↗
25. Laser-irradiation-induced dynamically recrystallized microstructure and properties of supersonic-particle-deposited Ni-Fe-Cr-Nb-Ti-Al high-entropy alloy coating10.1016/j.matchar.2021.111600 ↗
26. Microstructure, mechanical properties, and strengthening mechanisms of nanostructural Y-Zr-O oxide dispersion-strengthened (ODS) Mo alloys10.1016/j.jallcom.2022.166155 ↗
27. Investigation of coarsening of oxide nanoparticles at 1400 K and its effect on the microstructure formation of an ODS Eurofer steel10.1016/j.matchar.2022.111723 ↗
28. Dislocation-climbing bypass over dispersoids with different lattice misfit in creep deformation of FeCrAl oxide dispersion-strengthened alloys10.1016/j.jmrt.2021.11.123 ↗
29. Modifications of grain-boundary structure by friction stir welding in the joint of nano-structured oxide dispersion strengthened ferritic steel and reduced activation martensitic steel10.1016/j.scriptamat.2015.04.012 ↗
30. Fiber texture-dependent oxidation behaviour of Cr-coated zirconium alloy in high temperature steam10.1016/j.corsci.2022.110449 ↗
31. An interesting oxidation phenomenon of Cr coatings on Zry-4 substrates in high temperature steam environment10.1016/j.corsci.2019.05.017 ↗
32. Enhanced plasticity of the oxide scales by in-situ formed Cr2O3/Cr heterostructures for Cr-based coatings on Zr alloy in 1200 °C steam10.1016/j.corsci.2021.109361 ↗
33. Stresses in NiO, Cr2O3 and Al2O3 oxide scales10.1016/0921-5093(94)09747-X ↗
34. High temperature oxidation and microstructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments10.1016/j.jnucmat.2019.151737 ↗
35. A diffusion-coupled cohesive element model for cracking analysis of thermal barrier coatings10.1016/j.engfracmech.2021.107625 ↗
36. Oxidation behavior and Cr-Zr diffusion of Cr coatings prepared by atmospheric plasma spraying on zircaloy-4 cladding in steam at 1300 ℃10.1016/j.corsci.2022.110378 ↗
37. Formation and stability of oxide layer in FeCrAl fuel cladding material under high-temperature steam10.1016/j.jallcom.2016.05.145 ↗
38. Microstructure evolution and adhesion properties of thick Cr coatings under different thermal shock temperatures10.1016/j.surfcoat.2021.127224 ↗
39. Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO–ZrO210.1016/j.ceramint.2013.04.061 ↗