In-situ monitoring of the electrochemical corrosion behavior in fluoride environment of cellular structured Ti6Al4V alloy fabricated by electron beam melting
Source abstract
Abstract
Abstract The variation of electrochemical corrosion behavior with pore depth in porous Ti6Al4V alloys produced by electron beam melting (EBM) was studied in situ by a unique simulation model in acidic solution containing fluoride (PBS-H-F). The results suggested that steady-state pitting occurred at shallow pore depth position, while the sample at deep pore depth position exhibited superior corrosion resistance. The degree of corrosion on the surface was decreased with the increase in pore depth, including susceptibility to pitting, a behavior attributed to the concentration gradient of fluoride ions inside the pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
2. Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting10.1016/j.msea.2014.12.036 ↗
3. Additively manufactured metallic porous biomaterials based on minimal surfaces: a unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
4. Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.actamat.2018.02.060 ↗
5. Open-cellular metal implant design and fabrication for biomechanical compatibility with bone using electron beam melting10.1016/j.jmbbm.2017.02.019 ↗
6. Enhancing corrosion resistance and biocompatibility of interconnected porous β-type Ti-24Nb-4Zr-8Sn alloy scaffold through alkaline treatment and type I collagen immobilization10.1016/j.apsusc.2019.01.084 ↗
7. Special modes of corrosion under physiological and simulated physiological conditions10.1016/j.actbio.2007.12.003 ↗
8. The effect of temperature on the nucleation of corrosion pits on titanium in Ringer’s physiological solution10.1016/j.biomaterials.2004.02.023 ↗
9. Corrosion at the marginal gap of implant-supported suprastructures and implant failure
10. Persistent acute inflammation at the implant-abutment interface10.1177/154405910308200316 ↗
11. Structural characterization and electrochemical behavior of a laser-sintered porous Ti-10Mo alloy10.1016/j.corsci.2012.10.036 ↗
12. Selective laser sintered porous Ti-(4-10)Mo alloys for biomedical applications: structural characteristics, mechanical properties and corrosion behaviour10.1016/j.corsci.2015.03.005 ↗
13. Corrosion behaviour of porous Ti intended for biomedical applications10.1007/s10934-016-0185-0 ↗
14. The influence of pore morphology on corrosion10.1016/S0010-938X(97)00152-2 ↗
15. Corrosion behaviour of porous Ti–39Nb alloy for biomedical applications10.1016/j.corsci.2013.03.007 ↗
16. Evolution of oxide film on the internal porosity of Ti-30Nb-13Ta-2Mn alloy foam10.1016/j.electacta.2018.05.010 ↗
17. In-situ monitoring of the electrochemical behavior of cellular structured biomedical Ti-6Al-4V alloy fabricated by electron beam melting in simulated physiological fluid10.1016/j.actbio.2020.02.008 ↗
18. Corrosive effects of fluoride on titanium under artificial biofilm10.1016/j.jpor.2017.08.004 ↗
19. Influence of fluoride content and pH on corrosion and tribocorrosion behaviour of Ti13Nb13Zr alloy in oral environment10.1016/j.jmbbm.2015.05.008 ↗
20. Influence of fluoride concentration and pH on corrosion behavior of titanium in artificial saliva10.1007/s10800-006-9283-z ↗
21. Titanium surface topography after brushing with fluoride and fluoride-free toothpaste simulating 10 years of use10.1016/j.jdent.2012.01.001 ↗
22. Corrosion behavior of pure titanium and titanium alloys in various concentrations of acidulated phosphate fluoride (APF) solutions10.4012/dmj.25.104 ↗
23. Corrosion behavior and surface characterization of titanium in solution containing fluoride and albumin10.1016/j.biomaterials.2004.03.025 ↗
24. Effects of fluorides on titanium and other dental alloys in dentistry10.1016/S0142-9612(97)00179-8 ↗
25. How do titanium and Ti6Al4V corrode in fluoridated medium as found in the oral cavity? An in vitro study10.1016/j.msec.2014.11.055 ↗
26. Determination and explanation of the pH-related critical fluoride concentration of pure titanium in acidic solutions using electrochemical methods10.1016/j.electacta.2015.04.165 ↗
27. Effect of fluoride and albumin concentration on the corrosion behavior of Ti–6Al–4V alloy10.1016/S0142-9612(02)00315-0 ↗
28. Influence of fluoride content on the barrier layer formation and titanium dissolution in ethylene glycol–water electrolytes10.1016/j.electacta.2012.05.093 ↗
29. Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: influence of alloying element Al10.1016/j.corsci.2020.108605 ↗
30. Improved corrosion behaviour of electron beam melted Ti-6Al–4V alloy in phosphate buffered saline10.1016/j.corsci.2017.05.003 ↗
31. Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting10.1016/j.corsci.2018.09.010 ↗
32. Interpretation of electrochemical noise data10.5006/1.3290350 ↗
33. Electrochemical noise analysis on the pit corrosion susceptibility of Mg–10Gd–2Y–0.5Zr, AZ91D alloy and pure magnesium using stochastic model10.1016/j.corsci.2008.09.033 ↗
34. Electrochemical noise and impedance study on the corrosion of electroplated Ni-Cr coatings in HBF4 aqueous solution10.1016/j.jelechem.2020.113838 ↗
35. Effect of sulphate and molybdate ions on pitting corrosion of aluminium by using electrochemical noise analysis10.1016/j.jelechem.2006.06.017 ↗
36. Comparison of susceptibility to pitting corrosion of AA2024-T4, AA7075-T651 and AA7475-T761 aluminium alloys in neutral chloride solutions using electrochemical noise analysis10.1016/j.corsci.2007.05.028 ↗
37. Using wavelets transform in the analysis of electrochemical noise data10.1016/S0013-4686(99)00222-4 ↗
38. Time–frequency methods for trend removal in electrochemical noise data10.1016/j.electacta.2012.03.062 ↗
39. Effect of microstructure on the corrosion resistance of 2205 duplex stainless steel. Part 2: electrochemical noise analysis of corrosion behaviors of different microstructures based on wavelet transform10.1016/j.conbuildmat.2018.07.097 ↗
40. Electrochemical noise and impedance study of aluminium in weakly acid chloride solution10.1016/j.electacta.2003.09.032 ↗
41. The physical meaning of noise resistance10.1016/0010-938X(95)00089-3 ↗
42. Electrochemical characterization and stress corrosion cracking of E690 high strength steel in wet-dry cyclic marine environments10.1016/j.msea.2017.10.042 ↗
43. Corrosion of 304 stainless steel in carbonates melt–a state of enhanced dissolution of corrosion products10.1016/j.corsci.2020.108535 ↗
44. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
45. Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance10.5006/1.3280607 ↗
46. Corrosion characterization of new tin–silver binary alloys in nitric acid solutions10.1016/j.corsci.2008.02.003 ↗
47. X-ray photoelectron spectroscopy (XPS) studies of clean and hydrated TiO2 (rutile) surfaces10.1016/0009-2614(79)87231-0 ↗
48. The long-term behaviors of passivation and hydride layer of commercial grade pure titanium in TRU waste disposal environments
49. A sims investigation of hydrogen penetration of titanium electrodes10.1016/0013-4686(89)87178-6 ↗
50. Influence of fluoride, hydrogen peroxide and lactic acid on the corrosion resistance of commercially pure titanium10.1016/j.actbio.2005.09.004 ↗
51. The effect of material characteristics, of surface topography and of implant components and connections on soft tissue integration: a literature review
52. Electrochemical noise studies of the effect of nitrogen on pitting corrosion resistance of high nitrogen austenitic stainless steels10.1016/j.corsci.2011.08.027 ↗
53. Metastable pitting porrosion of stainless steel and the transition to stability
54. In situ study of dew point corrosion by electrochemical measurement10.1016/j.corsci.2013.03.001 ↗
55. Electrochemical noise study on 2024-T3 Aluminum alloy corrosion in simulated acid rain under cyclic wet–dry condition10.1016/j.electacta.2006.01.050 ↗
56. Pitting mechanism on an austenite stainless steel nanocrystalline coating investigated by electrochemical noise and in-situ AFM analysis10.1016/j.electacta.2008.06.076 ↗
57. Analysis of pitting corrosion behavior of pure Al in sodium chloride solution with the wavelet technique10.1016/j.jelechem.2004.12.032 ↗
58. Electrochemical noise analysis of the corrosion of AZ91D magnesium alloy in alkaline chloride solution10.1016/j.electacta.2007.07.014 ↗
59. Electrochemical noise analysis of LY12-T3 in EXCO solution by discrete wavelet transform technique10.1016/j.electacta.2005.07.012 ↗
60. Study on the corrosion behavior of reinforcing steel in cement mortar by electrochemical noise measurements10.1016/j.electacta.2006.11.015 ↗
61. In situ monitoring of the localized corrosion of 304 stainless steel in FeCl3 solution using a joint electrochemical noise and scanning reference electrode technique10.1016/j.elecom.2018.03.002 ↗
62. Corrosion initiation of stainless steel in HCl solution studied using electrochemical noise and in-situ atomic force microscope10.1016/j.electacta.2009.07.042 ↗
63. Electrochemical and XPS studies of titanium for biomaterial applications with respect to the effect of hydrogen peroxide10.1002/jbm.820280115 ↗
64. Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application10.1016/0013-4686(95)00465-3 ↗
65. Corrosion of additively manufactured alloys: a review10.5006/2926 ↗
66. A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments10.1016/j.jmst.2017.11.021 ↗
67. Effects of fluoride concentration and elastic tensile strain on the corrosion resistance of commercially pure titanium10.1016/S0142-9612(01)00079-5 ↗
68. The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05 M sulfuric acid10.1016/j.electacta.2014.05.055 ↗
69. Effect of fluoride on the corrosion behavior of nanostructured Ti-24Nb-4Zr-8Sn alloy in acidulated artificial saliva10.1016/j.jmst.2018.01.008 ↗
70. The effect of hydrofluoric-acid on the impedance of titanium acid corrosion protect
71. Electrochemical anodic dissolution kinetics of titanium in fluoride containing perchloric acid solutions at open-circuit potentials10.1149/1.3153148 ↗
72. A kinetic model for the anodic dissolution of Ti in HF in the active and passive regions10.1149/2.0251509jes ↗
73. Effect of fluoride ions on corrosion behaviour of commercial pure titanium in artificial seawater environment10.1016/j.apsusc.2019.144759 ↗
74. Electrochemical behavior and surface characteristics of pure titanium during corrosion in simulated desulfurized flue gas condensates10.1149/2.1321809jes ↗
75. Fatigue crack growth under corrosive environments of Ti-6Al-4V specimens produced by SLM10.1016/j.engfailanal.2020.104852 ↗
76. Corrosion fatigue behavior of Ti-6Al-4 V: chemical and mechanical driving forces10.1016/j.ijfatigue.2018.02.033 ↗