Effect of cooling condition on the intergranular corrosion resistance of UNS S32506 duplex stainless steel
Source abstract
Abstract
Abstract The effect of cooling condition on the intergranular corrosion resistance of UNS S32506 duplex stainless steel was investigated by means of Huey test and microstructural observation. It was found that quenching at a temperature below 800 °C after air cooling at a fixed rate from solutionization temperature enhances the intergranular corrosion rate. No precipitation has been found at all cooling conditions. Formation of Cr-depletion zone on the γ phase side of the α/γ interface due to local chemical change accompanying α-γ phase transformation during air cooling is responsible for the intergranular corrosion degradation of the UNS S32506 duplex stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effect of α/γ phase ratio and N addition on the corrosion resistance of Si-bearing duplex stainless steel in nitric acid10.2355/isijinternational.31.216 ↗
2. Influence of microstructure on the intergranular corrosion resistance of 24.4Cr/7.4Ni duplex stainless steel10.1016/1044-5803(91)90049-A ↗
3. Effect of minor constituents on the intergranular corrosion of austenitic stainless steels10.5006/0010-9312-11.1.22 ↗
4. Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS10.1016/j.corsci.2009.05.012 ↗
5. Evaluation of the intergranular corrosion susceptibility of UNS S31803 duplex stainless steel with thermoelectric power measurements10.1016/j.corsci.2012.12.008 ↗
6. Effect of Ce addition on the precipitation of deleterious phase and the associated intergranular corrosion resistance of 27Cr-7Ni hyper duplex stainless steels10.1016/j.corsci.2014.10.018 ↗
7. Evaluation of aged duplex stainless steel UNS S32750 susceptibility to intergranular corrosion by optimized double loop electrochemical potentiokinetic reactivation method10.1016/j.corsci.2012.11.024 ↗
8. Intergranular corrosion characteristics of super duplex stainless steel at carious interpass temperatures10.1016/S1452-3981(23)17369-X ↗
9. Influence of sigma phase on mechanical properties and corrosion resistance of duplex stainless10.1016/S0010-938X(99)00009-8 ↗
10. Effects of Cu on the precipitation of intermetallic compounds and the intergranular corrosion of hyper duplex stainless steels10.1016/j.corsci.2012.09.023 ↗
11. Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels10.1016/j.corsci.2011.01.048 ↗
12. Effects of inclusions on the precipitation of chi phases and intergranular corrosion resistance of hyper duplex stainless steel10.1016/j.corsci.2014.06.019 ↗
13. Scanning Kelvin probe force microscopy study of chromium nitrides in 2507 super duplex stainless steel – implications and limitations10.1016/j.electacta.2010.08.038 ↗
14. Secondary austenite formation and its relation to pitting corrosion in duplex stainless steel weld metal10.1179/mst.1995.11.3.276 ↗
15. Influence of sigma-phase formation on the localized corrosion behaviour of a duplex stainless steel10.1007/BF02648847 ↗
16. Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method II. Influence of precipitates10.1016/S0010-938X(00)00088-3 ↗
17. Microstructural evolution and localized corrosion resistance of an aged super duplex stainless steel10.1016/j.corsci.2003.09.024 ↗
18. Intergranular corrosion of nonsensitized austenitic stainless steels10.5006/0010-9312-24.1.24 ↗
19. Influence of phosphorus, sulphur, and oxygen on 65% nitric acid corrosion resistance of super high-clean 316L stainless steel10.2355/isijinternational.46.567 ↗
20. The effect of sulphur and phosphorus on the intergranular corrosion of 304 stainless steel10.5006/0010-9312-36.9.497 ↗
21. Influence of Si content on the corrosion resistance of austenitic Fe-Cr-Ni alloys in oxidizing acid10.1016/S0010-938X(68)80100-3 ↗
22. Intergranular corrosion of high purity austenitic stainless steel containing silicon additions10.1016/0025-5416(81)90192-0 ↗
23. Intergranular corrosion for extra high purity austenitic stainless steel in boiling nitric acid with Cr(VI)10.1299/jpes.3.31 ↗
24. Effect of post-weld heat treatment on microstructure evolution and pitting corrosion behavior of UNS S31803 duplex stainless steel welds10.1016/j.corsci.2012.04.047 ↗
25. Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S3275010.1016/j.matchar.2009.04.009 ↗
26. Effects of heat treatment on the phase ratio and corrosion resistance of duplex stainless steel10.2320/matertrans.MER2008168 ↗
27. Interpretation of the relation between ferrite fraction and pitting corrosion resistance of commercial 2205 duplex stainless steel10.1016/j.corsci.2014.08.021 ↗
28. ASTM A262 · 2002
29. Super duplex stainless steels10.1179/mst.1992.8.8.685 ↗
30. Study of nobility of chromium nitrides in isothermally aged duplex stainless steels by using SKPFM and SEM/EDS10.1016/j.corsci.2009.08.057 ↗
31. Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austenite10.1016/S0925-8388(99)00014-6 ↗
32. The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels10.1007/s11661-003-0304-9 ↗
33. Thermo-Calc Software, TCW 4.0, FE-DATA version 6.
34. Diffusion in bcc metals
35. Japan Stainless Steel Association, Sutenresukou Binran, third ed., Nikkan Kogyo Shimbun, Japan, 1995, 158–158.
36. Growth kinetics of secondary austenite in the welding microstructure of a UNS S32304 duplex stainless steel10.1016/j.actamat.2006.03.018 ↗