Corrosion behavior of reinforced no-fines concrete
Source abstract
Abstract
Abstract The CO2 induced corrosion behavior of no-fines concrete manufactured with three different strength classes and reinforcements is compared. The main results showed that black steel corrodes with rates three times higher with respect to those monitored in the other reinforcements, with higher corrosion rates in lower strength class concretes. The corrosion rates of steel covered by cement grout and galvanized reinforcements are not affected by concrete strength class since they protect themselves with the cement grout coating or zinc passivation, respectively. Among the reinforcements considered in this work, galvanized steel shows the best corrosion behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Neville · 1995
2. No-fines pervious concrete for paving
3. Comparison of test specimen preparation techniques for pervious concrete pavements10.1016/j.conbuildmat.2011.03.039 ↗
4. Building and non pavement applications of no-fines concrete10.1061/(ASCE)0899-1561(1995)7:4(286) ↗
5. Evaluation of thermal conductivity in air permeable concrete for dynamic breathing wall construction10.1016/j.cemconcomp.2007.04.008 ↗
6. M. Carsana, F. Tittarelli, L. Bertolini, Use of no-fines concrete as a building material: strength, durability properties and corrosion protection of embedded steel, Cem. Conc. Res., Submitted for publication.
7. Bertolini · 2004
8. Factors affecting the corrosion rate of steel in carbonated mortars10.1016/0010-938X(91)90048-T ↗
9. Relation Between the Alkali Content of Cements and the Corrosion Rates of the Galvanized Reinforcements, Corrosion of Reinforcements in Concrete Constructions
10. Effect of surface condition on the initial corrosion of galvanized reinforcing steel embedded in concrete10.1016/j.corsci.2008.06.035 ↗
11. Investigation of the major reduction reaction occurring during the passivation of galvanized steel rebars10.1016/j.corsci.2009.11.021 ↗
12. The effect of silane-based hydrophobic admixture on corrosion of galvanized reinforcing steel in concrete10.1016/j.corsci.2010.05.008 ↗
13. Comparison between surface and bulk hydrophobic treatment against corrosion of galvanized reinforcing steel in concrete10.1016/j.cemconres.2011.03.011 ↗
14. Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement types10.1016/0008-8846(88)90091-9 ↗
15. The effect of silane-based hydrophobic admixture on corrosion of reinforcing steel in concrete10.1016/j.cemconres.2008.06.009 ↗
16. Oxygen diffusion through hydrophobic cement-based materials10.1016/j.cemconres.2009.06.021 ↗
17. Corrosion behaviour in concrete of three differently galvanized steel bars10.1016/j.cemconcomp.2006.01.011 ↗
18. Jones · 1996
19. C. Alonso, J. Sánchez, J. Fullea, C. Andrade, The addition of nickel to improve the corrosion resistance of galvanized reinforcement, in: EGGA (Ed.), Proceedings of the 19th International Galvanizing Conference, EGGA, Berlin, 2000, pp. 1–8.
20. Comparison of the polarization resistance technique to the macrocell corrosion technique
21. Zinc Handbook Properties, Processing, and Use in Design
22. Miscellaneous Admixtures, Concrete Admixtures Handbook
23. Surface treatments for concrete: assessment methods and reported performance10.1016/S0950-0618(97)00019-6 ↗