Negatively correlated corrosion and stress corrosion cracking of Mg-Al-Mn-Ca based alloys
Source abstract
Abstract
A negative correlation between corrosion and stress corrosion cracking (SCC) for Mg-Al-Mn-Ca-(Ce/Y) alloys is revealed. Specifically, high-level Al solute and trace Ce/Y alloying enhance the corrosion resistance via reducing Volta potential difference and forming dense corrosion product film. However, the compact film breaks severely during SCC, aggravating the initiation of cracks. Meanwhile, the numerous second phases facilitate H diffusion and adsorption, exacerbating the hydrogen enhanced decohesion in Ce/Y-containing alloy. The film rupture induced anodic dissolution and hydrogen enhanced decohesion dominate the SCC. This work shed light on fundamental understanding of the relationship between corrosion and SCC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates10.1016/j.actamat.2020.09.006 ↗
2. Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys10.1016/j.actamat.2017.03.046 ↗
3. Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting10.1016/j.actamat.2018.07.057 ↗
4. Inhibiting stress corrosion cracking by removing corrosion products from the Mg-Zn-Zr alloy pre-exposed to corrosion solutions10.1016/j.actamat.2020.116570 ↗
5. Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet10.1016/j.actamat.2017.05.027 ↗
6. Stress Corrosion Cracking of Magnesium Alloys10.1002/adem.200900287 ↗
7. A Critical Review of the Stress Corrosion Cracking (SCC) of Magnesium Alloys10.1002/adem.200500071 ↗
8. Influence of alloyed Al on the microstructure and corrosion properties of extruded Mg–8Sn–1Zn alloys10.1016/j.corsci.2015.03.007 ↗
9. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
10. Enhanced corrosion resistance by engineering crystallography on metals10.1038/s41467-022-28368-8 ↗
11. Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film10.1038/s41467-022-33480-w ↗
12. Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys10.1016/j.corsci.2019.108419 ↗
13. Effect of Al/Mn ratio on corrosion behavior of lean Mg-Zn-Ca-Al-Mn alloy processed by twin-roll casting10.1016/j.corsci.2022.110938 ↗
14. Corrosion and passivation of magnesium alloys10.1016/j.corsci.2016.05.041 ↗
15. The Corrosion Behavior of Mg5Y in Nominally Distilled Water10.1002/adem.201700986 ↗
16. The corrosion of pure Mg accelerated by haze pollutant ammonium sulphate10.1016/j.corsci.2019.01.042 ↗
17. The Inhibitive Effect of Artificial Seawater on Magnesium Corrosion10.1002/adem.201900363 ↗
18. Role of alloyed Al on the microstructure and corrosion behavior of as-cast dilute Mg-2Zn-xAl-0.5Ca alloys10.1016/j.corsci.2022.110861 ↗
19. Stress corrosion cracking of magnesium alloys: A review
20. Influence of bovine serum albumin in Hanks’ solution on the corrosion and stress corrosion cracking of a magnesium alloy10.1016/j.msec.2017.06.002 ↗
21. Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn10.1016/j.corsci.2015.01.032 ↗
22. The influence of Sr on the microstructure, degradation and stress corrosion cracking of the Mg alloys – ZK40xSr10.1016/j.jmbbm.2016.11.014 ↗
23. Stress corrosion cracking of a recent rare-earth containing magnesium alloy, EV31A, and a common Al-containing alloy, AZ91E10.1016/j.corsci.2013.01.001 ↗
24. The stress corrosion cracking behaviour of biomedical Mg-1Zn alloy in synthetic or natural biological media10.1016/j.corsci.2020.108876 ↗
25. Effect of heat treatment on the stress corrosion cracking behavior of cast Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy in a 3.5 wt% NaCl salt spray environment10.1016/j.matchar.2021.111630 ↗
26. Quantitative study of the corrosion evolution and stress corrosion cracking of high strength aluminum alloys in solution and thin electrolyte layer containing Cl-10.1016/j.corsci.2020.109076 ↗
27. Rational design of a lean magnesium-based alloy with high age-hardening response10.1016/j.actamat.2018.07.054 ↗
28. A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability10.1016/j.scriptamat.2017.05.034 ↗
29. Improving room-temperature stretch formability of a high-alloyed Mg–Al–Ca–Mn alloy sheet by a high-temperature solution-treatment10.1016/j.msea.2020.140399 ↗
30. Evolution of microstructure, phases and mechanical properties in lean as-cast Mg–Al–Ca–Mn alloys under the influence of a wide range of Ca/Al ratio10.1016/j.msea.2020.140322 ↗
31. Development of corrosion-resistant Mg-Al-Ca-Mn-Zn alloy sheet with good tensile properties and stretch formability10.1016/j.jallcom.2022.164752 ↗
32. Review of the atmospheric corrosion of magnesium alloys10.1016/j.jmst.2019.05.001 ↗
33. Tailoring the microstructure and enhancing the corrosion resistance of extruded dilute Mg-0.6Al-0.5Mn-0.25Ca alloy by adding trace Ce10.1016/j.corsci.2022.110605 ↗
34. A corrosion-resistant and age-hardenable Mg-Al-Mn-Ca-Ce dilute alloy with fine-grained structure processed by controlled rolling10.1016/j.jmst.2023.04.029 ↗
35. Effects of the second phases on corrosion resistance of AZ91-xGd alloys treated with ultrasonic vibration10.1016/j.jallcom.2019.01.002 ↗
36. Study on the effect of mischmetal (La,Ce) on the micro-galvanic corrosion of AZ91 alloy using multiscale methods10.1016/j.jallcom.2018.11.030 ↗
37. The Effect of Homogenization Parameters on the Corrosion Rate of Mg-Al-Sn-Mn-La-Gd Alloys10.1007/s11665-022-06665-z ↗
38. Stress corrosion cracking susceptibility of Al–Mg alloy sheet with high Mg content10.1016/S0924-0136(02)00398-9 ↗
39. An innovative specimen configuration for the study of Mg corrosion10.1016/j.corsci.2010.09.016 ↗
40. New insights on corrosion behavior of aging precipitates in dilute Mg-Al-Ca alloy by experiments and first-principles calculations10.1016/j.corsci.2023.111254 ↗
41. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation10.1016/j.corsci.2009.10.016 ↗
42. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE4110.1016/j.corsci.2008.08.023 ↗
43. M. Ellner, The Structure of the High-Temperature Phase MnAl(h) and the Displacive Transformation from MnAl(h) into MnsAI8, METALLURGICAL TRANSACTIONS A. (n.d.).
44. Interface formation and strengthening mechanisms of Al/Mg bimetallic composite via compound casting with rare earth Ce introduction10.1016/j.msea.2022.143830 ↗
45. Role of trace additions of Mn and Y in improving the corrosion resistance of Mg–3Al–1Zn alloy10.1016/j.corsci.2020.108998 ↗
46. The stress corrosion cracking behavior of N80 carbon steel under a crevice in an acidic solution containing different concentrations of NaCl10.1016/j.corsci.2023.111068 ↗
47. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr10.1016/j.corsci.2013.06.030 ↗
48. Inhibitive effect of sodium molybdate on corrosion of AZ31 magnesium alloy in chloride solutions10.1016/j.electacta.2022.140175 ↗
49. Improved corrosion resistance in simulated concrete pore solution of surface nanocrystallized rebar fabricated by wire-brushing10.1016/j.corsci.2014.01.034 ↗
50. Tailoring the corrosion behavior and mechanism of AZ31 magnesium alloys by different Ca contents for marine application10.1016/j.corsci.2021.109842 ↗
51. R. Udhayan, On the corrosion behaviour of magnesium and its alloys using electrochew kal techniques, (n.d.).
52. Negative capacitance or inductive loop? – A general assessment of a common low frequency impedance feature10.1016/j.elecom.2018.11.017 ↗
53. A model of the anodic behaviour of iron in sulphuric acid medium10.1016/0013-4686(75)87017-4 ↗
54. I. Epelboin, M. Keddam, THE DISSOLUTION AND PASSIVATION OF Fe AND Fe-Cr ALLOYS IN ACIDIFIED SULPHATE MEDIUM: INFLUENCES OF pH AND Cr CONTENT, (n.d.).
55. Impedance Measurements and Analysis of the Corrosion of Chromium10.1149/1.2086861 ↗
56. EIS investigation of zinc dissolution in aerated sulfate medium. Part I: bulk zinc10.1016/S0013-4686(01)00740-X ↗
57. EIS investigation of zinc dissolution in aerated sulphate medium. Part II: zinc coatings10.1016/S0013-4686(02)00277-3 ↗
58. Effects of microstructure on the electrochemical discharge behavior of Mg-6wt%Al-1wt%Sn alloy as anode for Mg-air primary battery10.1016/j.jallcom.2016.12.172 ↗
59. Corrosion of hot extrusion AZ91 magnesium alloy. Part II: Effect of rare earth element neodymium (Nd) on the corrosion behavior of extruded alloy10.1016/j.corsci.2011.05.035 ↗
60. Improving Corrosion Resistance of AZ91D Magnesium Alloy by Nitrogen Ion Implantation10.5006/1.3292085 ↗
61. Revisiting the Electrochemical Impedance Spectroscopy of Magnesium with Online Inductively Coupled Plasma Atomic Emission Spectroscopy10.1002/cphc.201402666 ↗
62. Local Electrochemical Impedance Spectroscopy Applied to the Corrosion Behavior of an AZ91 Magnesium Alloy10.1149/1.1602080 ↗
63. An Impedance Investigation of the Mechanism of Pure Magnesium Corrosion in Sodium Sulfate Solutions10.1149/1.2401056 ↗
64. The corrosion of pure magnesium in aerated and deaerated sodium sulphate solutions10.1016/S0010-938X(00)00095-0 ↗
65. Enhanced Graphical Representation of Electrochemical Impedance Data10.1149/1.2168377 ↗
66. Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study10.1016/j.electacta.2013.12.124 ↗
67. Review of Recent Developments in the Field of Magnesium Corrosion10.1002/adem.201400434 ↗
68. Corrosion behavior of as-cast Mg–5Sn based alloys with In additions in 3.5 wt% NaCl solution10.1016/j.corsci.2019.108318 ↗
69. Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5 wt% sodium chloride solution10.1016/j.corsci.2016.05.019 ↗
70. Correlation between electrochemical impedance measurements and corrosion rate of magnesium investigated by real-time hydrogen measurement and optical imaging10.1016/j.electacta.2015.03.050 ↗
71. Corrosion behavior of AZ91 Mg alloy with a heterogeneous structure produced by ECAP10.1016/j.corsci.2021.109517 ↗
72. G.J. Brug, THE ANALYSIS OF ELECTRODE IMPEDANCES COMPLICATED BY THE PRESENCE OF A CONSTANT PHASE ELEMENT, (n.d.).
73. Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y 0 into a Capacitance10.5006/1.3280607 ↗
74. Dielectric Properties of Materials Showing Constant-Phase-Element (CPE) Impedance Response10.1149/2.033306jes ↗
75. Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media10.1016/j.electacta.2008.06.001 ↗
76. Enhanced mechanical properties and corrosion resistance of a fine-grained Mg-9Al-1Zn alloy: the role of bimodal grain structure and β-Mg17Al12 precipitates10.1016/j.mtla.2020.100840 ↗
77. The influence of manufacturing processes on the microstructure and corrosion of the AZ91D magnesium alloy evaluated using a computational image analysis10.1016/j.corsci.2015.05.032 ↗
78. Quasi-cleavage hydrogen-assisted cracking path investigation by fractographic and side surface observations10.1016/j.engfracmech.2019.04.042 ↗
79. Influence of sample geometry and microstructure on the hydrogen induced cracking characteristics under uniaxial load10.1016/j.msea.2017.02.094 ↗
80. G. Song, A. Atrens, M. Dargusch, In∼uence of microstructure on the corrosion of diecast AZ80D, Corrosion Science. (n.d.).
81. Formulation of corrosion rate of magnesium alloys using microstructural parameters10.1016/j.jma.2019.12.001 ↗