Effect of subcritical-temperature heat treatment on corrosion of SLM SS316L with different process parameters
Source abstract
Abstract
This study focuses on regulating the 316 L stainless steel manufactured by selective laser melting (SLM) microstructure and analyzing the influence between it and the corrosion resistance behaviors. The results show after the same subcritical-temperature heat treatment (950 °C). For the high-parameter (HP) samples, the high-density dislocation of the cellular substructures and the molten pool boundaries are eliminated. The nano inclusions are further evenly distributed, which enhances the corrosion resistance. However, the melt pool boundary of low-parameter (LP) samples is no longer eliminated, and nano-inclusions are agglomerated, resulting in reduced corrosion resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. An assessment of ultra fine grained 316L stainless steel for implant applications10.1016/j.actbio.2015.10.043 ↗
2. Strain-induced reactivation of corrosion pits in austenitic stainless steel10.1016/j.corsci.2017.05.023 ↗
3. Selective laser melting of aluminum and titanium matrix composites: recent progress and potential applications in the aerospace industry10.3390/aerospace7060077 ↗
4. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
5. The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder10.1016/j.msea.2013.06.055 ↗
6. 316L stainless steel with gradient porosity fabricated by selective laser melting10.1007/s11665-009-9535-2 ↗
7. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
8. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers10.1016/j.matdes.2013.10.016 ↗
9. Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting10.1016/j.msea.2016.01.028 ↗
10. Selective laser melting of 316L austenitic stainless steel: detailed process understanding using multiphysics simulation and experimentation10.3390/met11071076 ↗
11. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
12. On the thermal coarsening and transformation of nanoscale oxide inclusions in 316L stainless steel manufactured by laser powder bed fusion and its influence on impact toughness10.1016/j.msea.2022.142690 ↗
13. Microstructural features contributing to macroscopic corrosion: The role of oxide inclusions on the corrosion properties of additively manufactured 316L stainless steel10.1016/j.corsci.2022.110354 ↗
14. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting10.1016/j.jnucmat.2015.12.034 ↗
15. The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting10.1016/j.matlet.2019.02.047 ↗
16. Laser additive manufacturing of steels10.1080/09506608.2021.1983351 ↗
17. Corrosion behavior of 316L stainless steel fabricated by selective laser melting under different scanning speeds10.1007/s11665-018-3446-z ↗
18. Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting10.1016/j.actamat.2016.02.005 ↗
19. Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting10.1016/j.jallcom.2017.07.177 ↗
20. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
21. Heat treatment for metal additive manufacturing10.1016/j.pmatsci.2022.101051 ↗
22. Oxidation behavior of 316L austenitic stainless steel in high temperature air with long-term exposure10.1088/2053-1591/ab96fa ↗
23. Properties of oxide films formed on 316L SS and model alloys with modified Ni, Cr and Si contents in high temperature water10.1016/j.corsci.2016.02.001 ↗
24. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel10.1016/j.scriptamat.2017.07.037 ↗
25. Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing10.1016/j.corsci.2019.108353 ↗
26. Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells10.1016/j.electacta.2018.04.188 ↗
27. Corrosion testing of a heat treated 316 L functional part produced by selective laser melting10.4236/msa.2017.83015 ↗
28. A critical review of corrosion characteristics of additively manufactured stainless steels10.1080/09506608.2020.1855381 ↗
29. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
30. Effect of process parameters on density of 316L stainless steel by SLM and defects manifestation
31. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting10.1149/2.0551706jes ↗
32. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
33. Microstructure and corrosion characteristics of selective laser-melted 316L stainless steel: the impact of process-induced porosities10.1007/s11837-019-03647-w ↗
34. Study on formation of surface and microstructure of stainless steel part produced by selective laser melting10.1179/174328409X441300 ↗
35. Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: a comparative study bringing insights into the impact of microstructure on their passivity10.1016/j.corsci.2020.108914 ↗
36. Selective laser melting finite element modeling: validation with high-speed imaging and lack of fusion defects prediction10.1016/j.matdes.2018.06.037 ↗
37. Fatigue strength of additively manufactured 316L austenitic stainless steel10.1016/j.actamat.2020.08.033 ↗
38. EIS comparative study and critical equivalent electrical circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel10.1016/j.corsci.2020.108480 ↗
39. The history of the Point Defect Model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
40. The influence of passive film damage on pitting corrosion10.1149/2.0521602jes ↗
41. The initiation of pitting corrosion at MnS inclusions10.1016/0010-938X(93)90279-P ↗
42. Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing10.1016/j.corsci.2019.108412 ↗
43. Non-metallic inclusions in 17-4PH stainless steel parts produced by selective laser melting10.1016/j.matdes.2017.11.063 ↗
44. Surface roughness characterisation and analysis of the electron beam melting (EBM) process10.3390/ma12132211 ↗
45. Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting10.1016/j.actamat.2014.12.047 ↗
46. Passivation mechanisms and pre-oxidation effects on model surfaces of FeCrNi austenitic stainless steel10.1016/j.corsci.2020.108483 ↗
47. Effect of process parameters on defects, melt pool shape, microstructure, and tensile behavior of 316L stainless steel produced by selective laser melting10.1007/s40195-020-01143-8 ↗
48. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel10.1016/j.scriptamat.2017.07.037 ↗
49. Microstructure and corrosion performance of 316L stainless steel fabricated by selective laser melting and processed through high-pressure torsion10.1016/j.jallcom.2018.05.284 ↗
50. Enhanced corrosion resistance of additively manufactured 316L stainless steel after heat treatment10.1149/1945-7111/abc10e ↗
51. Microstructural evolution and corrosion behaviors of Inconel 718 alloy produced by selective laser melting following different heat treatments
52. The passivity of selective laser melted 316L stainless steel10.1016/j.apsusc.2019.144495 ↗
53. About metastable cellular structure in additively manufactured austenitic stainless steels
54. Non-oxide precipitates in additively manufactured austenitic stainless steel10.1038/s41598-021-89873-2 ↗
55. Formation mechanism of MnS inclusion during heat treatments and its influence on the pitting behavior of 316L stainless steel fabricated by laser powder bed fusion10.1016/j.corcom.2022.04.002 ↗
56. Mechanism of (Mg,Al,Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion10.1016/j.corsci.2012.09.044 ↗
57. Effect of annealing temperature on the corrosion behavior of duplex stainless steel studied by in situ techniques10.1016/j.corsci.2011.07.019 ↗
58. High-resolution Kelvin probe microscopy in corrosion science: scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP)10.1016/j.electacta.2007.03.016 ↗