journal article·2021-11

A novel single-phase γ′ nanocrystalline coating with high resistance to oxidation and scale rumpling yet mitigated interdiffusion with the alloy substrate

Shasha Yang, Shuai Li, Jinlong Wang, Zebin Bao, Lanlan Yang, Minghui Chen, Shenglong Zhu, Fuhui Wang

Corrosion Science· Volume 192
Publisher page

Abstract

Abstract Novel single-phase γ′ nanocrystalline coatings with and without Pt modification were developed on Rene N5 single-crystal superalloy to investigate their cyclic oxidation behaviors at 1100 °C and 1150 °C. Compared with conventional β-(Ni,Pt)Al coating, the γ′ nanocrystalline coatings, whether with Pt addition or not, prevailed in terms of inhibiting elements interdiffusion and surface rumpling. More importantly, Pt introduction was observed to further enhance oxidation performances of the γ′ nanocrystalline coating. The synergistic effect of nanocrystalline structure and Pt modification promoted to develop a highly purified alumina scale, preventing the formation of extensive Y-rich oxide impurities and avoiding the premature failure of TGO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
2. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
3. Coatings for gas turbine materials and long term stability issues10.1016/j.matdes.2004.02.005 ↗
4. Development of new bond coat “EQ coating” system10.1007/s11661-006-0050-x ↗
5. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
6. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
7. Thermal barrier coatings for aeroengine applications10.2514/1.20734 ↗
8. EB-PVD thermal barrier coatings for aeroengines and gas turbines10.1002/1527-2648(200104)3:4<193::AID-ADEM193>3.0.CO;2-U ↗
9. Precipitation phases in the nickel-based superalloy DZ 125 with YSZ/CoCrAlY thermal barrier coating10.1016/j.jallcom.2011.05.102 ↗
10. On the mechanism of secondary reaction zone formation in a coated nickel-based single-crystal superalloy containing ruthenium10.1016/j.scriptamat.2013.03.015 ↗
11. Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation10.1016/j.jmst.2019.11.017 ↗
12. Influences of ruthenium and crystallographic orientation on creep behavior of aluminized nickel-base single crystal superalloys10.1016/j.msea.2013.10.092 ↗
13. Effects of Re content and crystallographic orientation on creep behavior of aluminized Ni-base single crystal superalloys10.1016/j.matdes.2013.01.022 ↗
14. Preparation and oxidation performance of a low-diffusion Pt-modified aluminide coating with Re-base diffusion barrier10.1016/j.corsci.2020.108582 ↗
15. High temperature stress and its influence on surface rumpling in NiCoCrAlY bond coat10.1016/j.actamat.2017.08.001 ↗
16. On the rumpling mechanism in nickel-aluminide coatings Part I: an experimental assessment
17. On the rumpling mechanism in nickel-aluminide coatings Part II: characterization of surface undulations and bond coat swelling
18. Characterization of a cyclic displacement instability for a thermally grown oxide in a thermal barrier system10.1016/S1359-6454(01)00071-4 ↗
19. Wrinkling of α-alumina films grown by oxidation-II. Oxide separation and failure10.1016/S1359-6454(98)00134-7 ↗
20. On the failure mechanisms of thermal barrier coatings with diffusion aluminide bond coatings10.1016/j.msea.2004.11.038 ↗
21. Effects of platinum on the interdiffusion and oxidation behavior of Ni-Al-based alloys10.4028/www.scientific.net/MSF.461-464.213 ↗
22. The effect of Pt content on γ-γ′ NiPtAl coatings10.1016/j.surfcoat.2008.08.063 ↗
23. Comparison of the oxidation behavior of β and γ-γ′ NiPtAl coatings10.1016/j.surfcoat.2009.09.071 ↗
24. On the interfacial degradation mechanisms of thermal barrier coating systems: effects of bond coat composition10.1016/j.actamat.2010.06.027 ↗
25. High-temperature cyclic oxidation behaviour of Pt-rich γ- γ′ coatings. Part I: oxidation kinetics of coated AM1 systems after very long-term exposure at 1100 °C10.1016/j.corsci.2018.08.050 ↗
26. High-temperature cyclic oxidation of Pt-rich γ- γ′ bond-coatings. Part II: effect of Pt and Al on TBC system lifetime10.1016/j.corsci.2019.01.003 ↗
27. Spinel formation in thermal barrier systems with a Pt-enriched γ-Ni + γ′-Ni3Al bond coat10.1016/j.surfcoat.2007.10.030 ↗
28. High-temperature oxidation resistance of sputtered micro-grain superalloy K38G10.1007/BF00666917 ↗
29. Nanocrystalline coatings on superalloys against high temperature oxidation: a review10.1016/j.corcom.2021.06.003 ↗
30. Understanding of failure mechanisms of the oxide scales formed on nanocrystalline coatings with different Al content during cyclic oxidation10.1016/j.actamat.2020.116576 ↗
31. The effect of yttrium addition on oxidation of a sputtered nanocrystalline coating with moderate amount of tantalum in composition10.1016/j.apsusc.2016.01.088 ↗
32. Diffusion of Ta and its influence on oxidation behavior of nanocrystalline coatings with different Ta, Y and Al contents10.1016/j.corsci.2017.07.017 ↗
33. Oxidation behavior of Al/Y co-modified nanocrystalline coatings with different Al content on a nickel-based single-crystal superalloy10.1016/j.corsci.2020.108700 ↗
34. Effect of aluminisation characteristics on the microstructure of single phase β-(Ni,Pt)Al coating and the isothermal oxidation behaviour10.1016/j.corsci.2016.01.024 ↗
35. Determination of the piezospectroscopic coefficients for chromium-doped sapphire10.1111/j.1151-2916.1995.tb08493.x ↗
36. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
37. Spallation of thermal barrier coatings with real thermally grown oxide morphology under thermal stress10.1016/j.matdes.2018.03.019 ↗
38. Wrinkling of α-alumina films grown by thermal oxidation–I. Quantitative studies on single crystals of Fe-Cr-Al alloy10.1016/S1359-6454(98)00133-5 ↗
39. Wrinkling of α-alumina films grown by thermal oxidation–II. Oxide separation and failure10.1016/S1359-6454(98)00134-7 ↗
40. Alumina scale failure resulting from stress relaxation10.1016/S0257-8972(99)00331-X ↗
41. 18O/SIMS characterization of the growth mechanism of doped and undoped-Al2O310.1007/BF00665610 ↗
42. The relationship between oxide grain morphology and growth mechanisms for Fe-Cr-Al and Fe-Cr-Al-Y alloys10.1149/1.2129170 ↗
43. Grain boundary segregation of cation dopants in α-Al2O3 scales10.1149/1.1838563 ↗
44. Effect of co-doping of two reactive elements on alumina scale growth of β-NiAl at 1200 °C10.1016/j.corsci.2014.07.036 ↗
45. Y-rich oxide distribution in plasma sprayed MCrAlY-coatings studied by SEM with a cathodoluminescence detector and Raman spectroscopy10.1016/j.surfcoat.2009.08.034 ↗
46. Y/Hf-doped Al0.7CoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance at 1200 °C10.1016/j.corsci.2020.108803 ↗
47. The influence of bondcoat and topcoat mechanical properties on stress development in thermal barrier coating systems10.1016/j.actamat.2009.01.017 ↗
48. Finite element analysis of stress distribution in thermal barrier coatings10.1016/j.surfcoat.2008.06.178 ↗
49. Assessment of TBC systems failure mechanisms using a fracture mechanics approach10.1016/j.actamat.2005.06.003 ↗
50. Preparation, mechanical, and thermal properties of a promising thermal barrier material: Y4Al2O910.1007/s40145-015-0141-5 ↗
51. Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect10.1007/BF01046818 ↗
52. Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy10.1016/j.actamat.2020.04.016 ↗
53. Effect of Pt on interdiffusion and mechanical properties of the γ and γ′ phases in the Ni-Pt-Al system10.1080/14786435.2012.669073 ↗
54. Arenz · 2005 · 90045
55. Surface rumpling of a (Ni,Pt)Al bond coat induced by cyclic oxidation10.1016/S1359-6454(00)00156-7 ↗
56. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
57. Enhanced thermal stability of nanograined metals below a critical grain size10.1126/science.aar6941 ↗