Early oxidation stages of a Co-Cr-Fe-Mn-Ni-Si complex concentrated alloy with Cr, Mn, and Si contents matching those of 316L stainless steel
Source abstract
Abstract
Abstract A complex concentrated Co-Cr-Fe-Mn-Ni-Si alloy with increased configurational entropy and contents of Cr, Mn, and Si corresponding to those in 316L stainless steel was studied with respect to its oxidation behavior. Early-stage oxidation was investigated for annealing at 400 °C and 800 °C. In addition to Cr, considerable amounts of Fe, Co, and Ni were found in the oxide, and nodules formed at 800 °C. In contrast to 316L, on which a protective corundum-type oxide forms during oxidation, the formation of spinel-type oxide was observed to dominate both at low and high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Investigation into high-temperature corrosion in a large-scale municipal waste-to-energy plant10.1016/j.corsci.2010.07.032 ↗
2. Corrosion of metal bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2010.01.059 ↗
3. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
4. DCEMS study of thin oxide layers and interface of stainless steel films deposited by sputtering austenitic AISI30410.1023/B:HYPE.0000043284.95746.f2 ↗
5. Analysis of oxide layers on stainless steel (304, and 316) by conversion electron Mössbauer spectrometry10.1007/BF01045379 ↗
6. Critical temperature determination of detectable Cr diffusion enhancement by nanostructure through structural evolution analysis of the oxide films at 25–450°C on 304 stainless steel10.1016/j.apsusc.2017.04.133 ↗
7. Bridging the gap between high temperature and low temperature oxidation of 316 L10.1016/j.corsci.2020.108884 ↗
8. Oxidation of an austenitic stainless steel with or without alloyed aluminum in O2+10% H2O environment at 800°C10.1016/j.corsci.2017.03.015 ↗
9. Oxidation of stainless steel 316L – oxide grains with pronounced inhomogeneous composition10.1016/j.corsci.2018.12.035 ↗
10. Oxidation of stainless steels (AISI 304 and 316) at high temperature. Influence on the metallic substratum10.1051/jp4:1993935 ↗
11. Characterization of oxide film grown on stainless steel by a new in-house grazing incidence X-ray scattering (GIXS) apparatus10.2320/matertrans1989.36.1 ↗
12. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
13. High-entropy alloys: potential candidates for high-temperature applications – an overview10.1002/adem.201700645 ↗
14. Air oxidation of FeCoNi-base equi-molar alloys at 800–1000°C10.1007/s11085-004-3198-z ↗
15. Oxidation of CoCrFeMnNi high entropy alloys10.1007/s11837-015-1517-2 ↗
16. Nonlinear oxidation behavior in pure Ni and Ni-containing entropic alloys
17. High-temperature oxidation behaviour of low-entropy alloy to medium- and high-entropy alloys10.1007/s10973-018-6963-y ↗
18. Oxidation behavior of the CrMnFeCoNi high-entropy alloy10.1007/s11085-016-9616-1 ↗
19. Air-oxidation of FeCoNiCr-based quinary high-entropy alloys at 700–900°C10.1016/j.corsci.2017.02.008 ↗
20. Oxidation behavior of CoCrFeMnNi high entropy alloy after plastic deformation10.1016/j.corsci.2019.108285 ↗
21. Effect of thermo-mechanical processing on oxidation of austenitic stainless steel 316L in supercritical water10.1016/j.corsci.2015.02.008 ↗
22. Atom-probe tomography characterization of the oxidation of stainless steel10.1016/j.scriptamat.2010.02.021 ↗
23. Beneficial effect of cold-working on high temperature oxidation resistance of austenitic stainless steel10.1016/j.corsci.2019.108149 ↗
24. Grain-size effects on the high-temperature oxidation of modified 304 austenitic stainless steel10.1007/s11085-012-9347-x ↗
25. The role of grain boundaries in the initial oxidation behavior of austenitic stainless steel containing alloyed Cu at 700°C for advanced thermal power plant applications10.1016/j.corsci.2015.03.014 ↗
26. High-temperature oxidation behaviour of CoCrNi medium-entropy alloy10.1016/j.corsci.2020.108755 ↗
27. Response of austenite finish temperature and phase transformation characteristics of thin medical-grade Ni–Ti wire to short-time annealing10.1016/j.scriptamat.2008.06.057 ↗
28. Advance in orientation microscopy: quantitative analysis of nanocrystalline structures10.1021/nn1023126 ↗
29. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
30. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
31. High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy10.1016/j.intermet.2018.04.006 ↗
32. Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C10.1016/j.corsci.2005.08.012 ↗
33. Oxidation behavior of a fine-grained rapidly solidified 18-8 stainless steel10.1007/BF02643355 ↗
34. High temperature oxidation of stainless steel AISI316L in air plasma10.1016/j.apsusc.2008.06.017 ↗
35. New insights into the effects of surface nanocrystallization on the oxidation of 321 austenitic stainless steel in a humid oxygen environment at 1000 °C10.1016/j.corsci.2018.11.024 ↗
36. Effect of alloy grain size and silicon content on the oxidation of austenitic Fe-Cr-Ni-Mn-Si alloys in pure O210.1007/BF00662967 ↗
37. Nonequilibrium solute capture in passivating oxide films10.1103/PhysRevLett.121.145701 ↗
38. Competition between thermodynamics, kinetics and growth mode in the early-stage oxidation of an equimolar CoCrFeNi alloy10.1016/j.actamat.2020.06.056 ↗
39. Recherches sur les variations de composition du protoxyde de fer
40. Crystal structure refinements of InxFe3−xO4(x ≤ 0.3) spinels by the Rietveld method10.1524/zkri.1998.213.9.461 ↗
41. Distribution of electron density and the gradient of electrical field in hematite at 153 K from the precision X-ray diffraction data
42. Oxidation of AISI 304 and AISI 439 stainless steels10.1016/j.msea.2006.10.022 ↗
43. The high-temperature oxidation of bulk nanocrystalline 304 stainless steel in air10.1016/j.corsci.2013.03.008 ↗
44. Mechanism of breakaway oxidation of Fe–Cr and Fe–Cr–Ni alloys in dry and wet carbon dioxide
45. Oxidation after breakdown of the chromium-rich scale on stainless steels at high temperature: internal oxidation10.1007/s11085-016-9610-7 ↗
46. Barin · 1995
47. The effects of short-range chemical and structural ordering related to oxygen interstitials on mechanical properties of CrCoFeNi high-entropy alloys: a first-principles study10.1016/j.jallcom.2020.156060 ↗
48. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
49. Interdiffusion in Cr–Fe–Co–Ni medium-entropy alloys10.1016/j.intermet.2020.106789 ↗
50. Solving the issues of multicomponent diffusion in an equiatomic NiCoFeCr medium entropy alloy10.1016/j.actamat.2020.03.041 ↗
51. Effect of Cr and Ni contents on the oxidation behavior of ferritic and austenitic model alloys in air with water vapor10.1023/B:OXID.0000032334.75463.da ↗
52. Transient oxidation in Fe-Cr-Ni alloys: a raman-scattering study10.1007/BF01048636 ↗
53. Photoelectrochemical properties of Ni-doped Fe2O3 thin films prepared by electrodeposition10.1016/j.electacta.2011.10.051 ↗
54. High temperature oxidation and corrosion behaviours of Ni–Fe–Cr alloys as inert anode for aluminum electrolysis10.1016/j.corsci.2019.06.020 ↗
55. CoFe2O4 spinel protection coating thermally converted from the electroplated Co–Fe alloy for solid oxide fuel cell interconnect application10.1016/j.jpowsour.2009.12.011 ↗
56. Effect of cobalt content on the oxidation and corrosion behavior of Ni–Fe-based superalloy for ultra-supercritical boiler applications10.1007/s11085-017-9783-8 ↗
57. Effect of Cr, Co, and Ti additions on the high-temperature oxidation behavior of Ni3Al10.1007/BF01046886 ↗
58. Hot corrosion behavior of Co modified NiAl coating on nickel base superalloys10.1016/j.corsci.2012.06.027 ↗