Localised instability of titanium during its erosion-corrosion in simulated acidic hydrometallurgical slurries
Source abstract
Abstract
Abstract Electrochemical techniques were used to investigate the erosion-corrosion of titanium in simulated acidic mineral leaching slurries. Erosion-corrosion of titanium was caused by solid particle impingement. Electrochemical noise revealed that solid particle impacts resulted in localised fracture of the passive film, and erosion-corrosion of titanium proceeded in the form of current transients. As conditions become more abrasive, erosion-corrosion is an increasing threat to titanium equipment exposed to acidic slurries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (98)
Show source-provided references
1. A procedure to predict solid particle erosion in elbows and tees10.1115/1.2842089 ↗
2. Erosion-corrosion resistant alloy development for aggressive slurry flows10.1016/S0167-577X(00)00255-X ↗
3. Blau · 1992 · 18 · 127
4. Mechanisms of wear on a co-base alloy in liquid–solid slurries10.1016/S0043-1648(99)00357-9 ↗
5. The effect of TiN coating on erosion–corrosion resistance of α-Ti alloy in saline slurry10.1016/S0010-938X(99)00050-5 ↗
6. Erosion-corrosion of stainless steels, titanium, tantalum and zirconium10.1016/j.wear.2004.09.023 ↗
7. Wear‐accelerated corrosion of passive metals in tribocorrosion systems10.1149/1.1838341 ↗
8. Erosion-and cavitation-corrosion of titanium and its alloys10.1016/S0043-1648(01)00709-8 ↗
9. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part I: corrosion and wear10.1016/j.engfailanal.2013.11.003 ↗
10. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part II: erosion and cavitation corrosion10.1016/j.engfailanal.2013.11.002 ↗
11. Pressure oxidation leaching of chalcopyrite Part I. Comparison of high and low temperature reaction kinetics and products10.1016/j.hydromet.2006.11.015 ↗
12. D. Jones, Chloride assisted hydrometallurgical extraction of copper from sulphide ore materials, International Patent, (1999) 1.
13. Chalcopyrite hydrometallurgy at atmospheric pressure: 2. Review of acidic chloride process options10.1016/j.hydromet.2014.03.013 ↗
14. Influence of cupric, ferric, and chloride on the corrosion of titanium in sulfuric acid solutions up to 85 °C10.5006/0963 ↗
15. Vaughan · 2003
16. Corrosion of Ti-2 and Ti-7 relevant to nickel acid leach chemistry10.1016/j.hydromet.2009.12.011 ↗
17. High temperature corrosion of titanium under conditions relevant to pressure leaching: mass loss and electrochemistry10.5006/1366 ↗
18. Corrosion of titanium and its alloys in sulfuric acid in the presence of chlorides10.1149/1.2126580 ↗
19. Electrochemical assessment of erosion-corrosion of commercially pure titanium and a titanium alloy in slurry impingement
20. Mercer · 2010
21. Corrosion resistance of commercially pure titanium10.5006/0010-9312-5.10.319 ↗
22. The effect of sea‐water velocity on the corrosion behaviour of metals10.1111/j.1559-3584.1966.tb04144.x ↗
23. Corrosion properties of titanium in marine environments10.1149/1.2781297 ↗
24. Corrosion-erosion in multiphase systems
25. Erosion-corrosion of a carbon steel elbow in a carbon dioxide environment10.5006/1.3292162 ↗
26. Erosion-corrosion of copper-nickel alloys in sea water and other aqueous environments–a literature review10.5006/0010-9312-32.6.242 ↗
27. On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence10.1016/0043-1648(78)90147-3 ↗
28. The role of iron in the CESL process
29. Effects of temperature on the behaviour of metals under erosion by particulate matter10.1520/JTE11610J ↗
30. Passivity breakdown, pit initiation and propagation of pits in metallic materials–review10.1016/j.corsci.2014.10.006 ↗
31. The localized breakdown and repair of passive surfaces during pitting10.1016/0010-938X(89)90038-3 ↗
32. The nucleation, growth and stability of micropits in stainless steel10.1016/0010-938X(94)90145-7 ↗
33. Effect of sliding conditions on micropitting behaviour of AISI 304 stainless steel in chloride containing solution10.1016/j.corsci.2018.05.004 ↗
34. A comparative study of critical pitting temperature (CPT) of stainless steels by electrochemical impedance spectroscopy (EIS), potentiodynamic and potentiostatic techniques10.1016/j.corsci.2012.02.026 ↗
35. Localized corrosion of metals: a review of the rate-controlling factors in initiation and growth
36. Growth of corrosion pits on stainless steel in chloride solution containing dilute sulphate10.1016/0010-938X(92)90191-5 ↗
37. The nucleation and growth of corrosion pits on stainless steel10.1016/0010-938X(93)90133-2 ↗
38. Observations of localised instability of passive titanium in chloride solution10.1016/0013-4686(95)00126-Y ↗
39. Metastable and stable pitting corrosion of titanium in halide solutions10.5006/1.3287839 ↗
40. Studies of passive film breakdown by detection and analysis of electrochemical noise10.1016/0039-6028(80)90653-6 ↗
41. Coupling of acoustic emission and electrochemical noise measurement techniques in slurry erosion-corrosion studies
42. Metastable pitting of carbon steel under potentiostatic control10.1149/1.1391707 ↗
43. The role of chloride ions in pitting of carbon steel studied by the statistical analysis of electrochemical noise10.1016/S0169-4332(99)00328-1 ↗
44. Measurement of the noise resistance for corrosion applications10.5006/1.3290327 ↗
45. Analysis of the role of electrode capacitance on the initiation of pits for A516 carbon steel by electrochemical noise measurements10.1016/S0010-938X(98)00181-4 ↗
46. Electrochemical investigation of locally depassivated iron– a comparison of various techniques10.1016/0013-4686(86)87068-2 ↗
47. Investigation of erosion-corrosion processes using electrochemical noise measurements10.1016/S0301-679X(02)00054-3 ↗
48. Oltra · 1989 · 3
49. Interpretation of electrochemical noise data10.5006/1.3290350 ↗
50. Parameters for the identification of localized corrosion: theoretical analysis
51. A practical evaluation of electrochemical noise parameters as indicators of corrosion type10.1016/j.electacta.2004.01.040 ↗
52. Guideline for an assessment of electrochemical noise measurement devices10.1002/maco.201005839 ↗
53. Shot noise and statistical parameters for the estimation of corrosion mechanisms10.1016/j.corsci.2005.05.047 ↗
54. Electrochemical noise technique
55. Kinetics of quartz dissolution at low temperatures10.1016/0009-2541(90)90084-K ↗
56. Slurry pot investigation of the influence of erodant characteristics on the erosion resistance of titanium10.1016/j.wear.2014.10.005 ↗
57. Large particle effects in chemical/biochemical heap leach processes–a review10.1016/j.mineng.2011.04.002 ↗
58. Kinetics of ferric ion reduction on chalcopyrite and its influence on leaching up to 150 °C10.1016/j.electacta.2014.08.060 ↗
59. Construction and characterisation of a solution-filled external pressure balanced reference electrode10.1016/j.corsci.2012.05.029 ↗
60. Electrochemical impedance spectroscopy
61. The influence of chloride and sulphate ions on the corrosion behaviour of Ti and Ti-6Al-4V alloy in oxalic acid10.1016/j.electacta.2008.12.060 ↗
62. Temperature dependence of crevice corrosion initiation on titanium grade 210.1149/1.1499501 ↗
63. Application of electrochemical impedance spectroscopy (EIS) for characterising the corrosion-protective performance of organic coatings on metals10.1016/0033-0655(92)87005-U ↗
64. EIS studies of coated metals in accelerated exposure10.1016/S0300-9440(02)00222-9 ↗
65. Simultaneous degradation by corrosion and wear of titanium in artificial saliva containing fluorides10.1016/j.wear.2012.05.030 ↗
66. The influence of applied potential on the erosion-corrosion behaviour of AISI321 stainless steel in acidic slurry medium10.1016/0043-1648(95)07134-2 ↗
67. Electrochemical aspects of film breakdown and repair processes in erosion-corrosion of stainless steels
68. The effect of film formation temperature on the stochastic processes of pit generation on anodized titanium10.1016/0010-938X(94)90128-7 ↗
69. Noël · 1999
70. Effect of Fe (III) and Cu (II) on the passivation of Ti-2 in acidic chloride solutions10.1149/2.1021902jes ↗
71. The effect of film formation conditions on the structure and composition of anodic oxide films on titanium10.1016/0010-938X(94)00133-Q ↗
72. Instability of anodic oxide films on titanium10.1149/1.2124097 ↗
73. Electrolytic breakdown crystallisation of anodic oxide films on Al, Ta and Ti10.1016/0013-4686(70)80064-0 ↗
74. The birth of corrosion pits as stimulated by slurry erosion10.1016/S0010-938X(99)00100-6 ↗
75. Electrochemical studies of the pitting of austenitic stainless steel10.1016/0010-938X(86)90130-7 ↗
76. Stochastic process of chloride pit generation in passive stainless steel10.1149/1.2133034 ↗
77. Design aspects of electrochemical noise measurements for uncoated metals: electrode size and sampling rate10.5006/1.3280468 ↗
78. Study of the copper anode passivation by electrochemical noise analysis using spectral and wavelet transforms10.1016/j.electacta.2009.12.006 ↗
79. An integrated approach in the time, frequency and time-frequency domain for the identification of corrosion using electrochemical noise10.1016/j.electacta.2016.11.018 ↗
80. Sources of electrochemical noise in corroding systems10.1134/S1023193506050077 ↗
81. Corrosion monitoring system based on measurement and analysis of electrochemical noise10.5006/1.3293594 ↗
82. Monitoring of carbon steel corrosion by use of electrochemical noise and recurrence quantification analysis10.1016/j.corsci.2016.07.009 ↗
83. Electrochemical noise investigation of Aloe plant extract as green inhibitor on the corrosion of stainless steel in 1 M H2SO410.1016/j.jiec.2014.02.041 ↗
84. Evaluation of Thymus vulgaris plant extract as an eco-friendly corrosion inhibitor for stainless steel 304 in acidic solution by means of electrochemical impedance spectroscopy, electrochemical noise analysis and density functional theory10.1016/j.jcis.2016.11.048 ↗
85. Influence of aliasing in time and frequency electrochemical noise measurements10.1149/1.1393251 ↗
86. On the repassivation behaviour of high‐purity titanium and selected α, β, and β+ α titanium alloys in aqueous chloride solutions10.1149/1.1836914 ↗
87. Evaluation of metastable pitting on titanium by charge integration of current transients10.1016/j.corsci.2010.03.012 ↗
88. Metastable and stable pitting events on Al induced by chlorate and perchlorate anions–polarisation, XPS and SEM studies10.1016/j.electacta.2008.10.009 ↗
89. Investigation of electrochemical processes by an electrochemical noise analysis–theoretical and experimental aspects in potentiostatic regime10.1016/0013-4686(86)80018-4 ↗
90. A review of the probabilistic aspects of localized corrosion10.5006/1.3585102 ↗
91. Spectral analysis of electrochemical noise with different transient shapes10.1016/S0013-4686(99)00406-5 ↗
92. The effects of pH on the repassivation of 304L stainless steel10.1016/0010-938X(83)90049-5 ↗
93. Determination of the critical flow velocities for erosion-corrosion of passive materials under impingement by NaCl solution containing sand10.1016/j.corsci.2014.07.043 ↗
94. The platelet mechanism of erosion of ductile metals10.1016/0043-1648(86)90085-2 ↗
95. Synergistic erosion-corrosion behaviour of commercially pure titanium at various impingement angles10.1016/j.wear.2017.03.016 ↗
96. Slurry erosion characteristics and erosion mechanisms of stainless steel10.1016/j.triboint.2014.05.014 ↗
97. The role of surface film on the critical flow velocity for erosion-corrosion of pure titanium10.1016/j.triboint.2019.01.006 ↗
98. Erosion-corrosion of Ti-6Al-4V in elevated temperature air environment10.1016/0043-1648(95)07161-X ↗