High temperature oxidation behaviors of SiON coated AISI 441 in Ar + O2, Ar+H2O, and Ar + CO2 atmospheres
Source abstract
Abstract
Abstract Silicon oxynitride (SiON) coated AISI 441 was prepared by pyrolysis of a dip-coated perhydropolysilazane (PHPS) precursor polymer. The high temperature oxidation behaviors of SiON coated AISI 441 substrates were studied in Ar + O2, Ar+H2O, and Ar + CO2 atmospheres at 800 °C for 100 h. The SiON coated AISI substrates showed better performance in all three atmospheres compared to the uncoated AISI 441 substrate. This improvement was attributed to the dense, crack-free SiON coatings, which provided complete separation between oxidizing species and the steel substrate. A thin oxide scale was observed on top of the SiON coating for all the atmospheres, which was attributed to the reactions between the oxidizing species in the atmosphere and the metallic species (Cr, Mn, and Fe) diffused through the SiON coating from the AISI 441 substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Catalytic Processes in Materials Science · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidation10.1016/j.jeurceramsoc.2008.11.013 ↗
2. High-temperature corrosion-related failures, in: failure analysis and prevention
3. Processing of polymer-derived ceramic composite coatings on steel10.1111/j.1551-2916.2007.02019.x ↗
4. Current status of environmental barrier coatings for Si-based ceramics
5. High-entropy environmental barrier coating for the ceramic matrix composites10.1016/j.jeurceramsoc.2019.02.022 ↗
6. Beneficial effect of a pre-ceramic polymer coating on the protection at 900 °C of a commercial AISI 304 stainless steel10.1007/s11085-016-9705-1 ↗
7. High performance environmental barrier coatings, Part II: Active filler loaded SiOC system for superalloys10.1016/j.jeurceramsoc.2011.05.047 ↗
8. Polymer derived silicon oxycarbide-based coatings10.1080/09506608.2017.1322247 ↗
9. High performance environmental barrier coatings, Part I: Passive filler loaded SiCN system for steel10.1016/j.jeurceramsoc.2011.05.027 ↗
10. Polymeric and ceramic silicon-based coatings - a review10.1039/C8TA09054H ↗
11. Preparation of moisture curable polysilazane coatings. Part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy10.1016/j.porgcoat.2005.02.006 ↗
12. Polymeric and ceramic like coatings on the basis of SiN(C) precursors for the protection of metals against corrosion and oxidation10.1002/9780470291320.ch26 ↗
13. Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings10.1016/j.jeurceramsoc.2015.07.013 ↗
14. Preparation of ceramic coatings from pre-ceramic precursors: Part I SiC and “Si3N4/Si2N2O” coatings on alumina substrates10.1007/BF00366878 ↗
15. Corrosion: No problem for precursor-derived covalent ceramics?
16. Oxidation and corrosion of ceramics and ceramic matrix composites10.1016/S1359-0286(01)00009-2 ↗
17. Oxidation behaviour of ceramic fibers from the Si-C-N-O system and related sub-systems10.1016/S0955-2219(00)00101-1 ↗
18. Oxidation kinetics of an amorphous silicon carbonitride ceramic10.1111/j.1151-2916.2001.tb00918.x ↗
19. Corrosion resistant polymer derived ceramic composite environmental barrier coatings10.1016/j.jeurceramsoc.2014.05.036 ↗
20. Protective-conducting coatings based on black glasses (SiOC) for application in solid oxide fuel cells10.1016/j.ijhydene.2017.09.069 ↗
21. Almost zero reflectance of a silicon oxynitride/porous silicon double layer antireflection coating for silicon photovoltaic cells10.1088/0022-3727/39/8/022 ↗
22. Characterization of silicon oxynitride gas barrier films10.1016/S0042-207X(02)00294-4 ↗
23. The development of the ceramics nano-film coating having both high corrosion resistance and excellent heat resistance
24. Particle-filled PHPS silazane-based coatings on steel10.1111/j.1744-7402.2008.02346.x ↗
25. Control of surface energy of silicon oxynitride films10.1021/la304307y ↗
26. Conversion behaviour and resulting mechanical properties of polysilazane-based coatings10.1016/j.jeurceramsoc.2011.09.005 ↗
27. The conversion of perhydropolysilazane into SiON films characterized by X-Ray photoelectron spectroscopy10.1111/jace.12045 ↗
28. Silicoaluminum carbonitride with anomalously high resistance to oxidation and hot corrosion10.1002/adem.200400010 ↗
29. Asymmetric polysilazane-derived ceramic structures with multiscalar porosity for membrane applications10.1016/j.micromeso.2016.06.027 ↗
30. A semi-empirical power-law model for the dip-coating of a substrate into a particle-containing, non-Newtonian, complex fluid system10.1016/j.ceramint.2018.12.154 ↗
31. Chapter 1 - the nature of high temperature oxidation
32. Birks · 2006
33. Oxidation kinetics of AISI 441 ferritic stainless steel at high temperatures in CO2 atmosphere10.1007/s11085-013-9432-9 ↗
34. Oxidation and volatilization of silica formers in water vapor10.1111/j.1151-2916.2003.tb03459.x ↗
35. Predicting oxide stability in high-temperature water vapor
36. Volatility of common protective oxides in high-temperature water vapor: current understanding and unanswered questions10.4028/www.scientific.net/MSF.461-464.765 ↗
37. Coated stainless steel 441 as interconnect material for solid oxide fuel cells: oxidation performance and chromium evaporation10.1016/j.jpowsour.2013.08.089 ↗
38. Identification by photoelectrochemistry of oxide phases grown during the initial stages of thermal oxidation of AISI 441 ferritic stainless steel in air or in water vapour10.1016/j.corsci.2008.12.002 ↗
39. Preparation of silicon carbonitrides from an organosilicon polymer: 1, thermal-decomposition of the cross-linked polysilazane10.1111/j.1151-2916.1993.tb03734.x ↗