Critical pitting temperature of selective laser melted 316L stainless steel: A mechanistic approach
Source abstract
Abstract
Abstract The critical pitting temperature (CPT) of selective laser melted (SLM) 316 L stainless steel in 1.0 M NaCl was measured and compared with a commercial wrought alloy. Potentiostatic measurements determined a mean CPT value of 16 ± 0.7 °C, 27.5 ± 0.8 °C and 31 ± 1 °C for the wrought alloy, the SLM alloy normal to the build direction and parallel to the build direction, respectively. The lead-in pencil electrode technique was used to study the pit chemistry of the two alloys and to explain the higher CPT values observed for the SLM alloy. A lower critical current density required for passivation in a simulated pit solution was measured for the SLM alloy. Moreover, the ratio of the critical concentration to saturated concentration of dissolving metal cations was found to be higher for the SLM alloy, which was related to its different salt film properties, possibly as a result of the SLM’s distinct microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Critical factors affecting the pitting corrosion resistance of additively manufactured nickel alloy in chloride containing environments
2. 3D printing in the oil field kicks into production mode10.2118/0816-0030-JPT ↗
3. Metal fabrication by additive manufacturing using laser and Electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
4. A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V10.1007/s11661-015-2882-8 ↗
5. Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting10.1016/j.corsci.2018.09.010 ↗
6. Improved corrosion behaviour of electron beam melted Ti-6Al–4V alloy in phosphate buffered saline10.1016/j.corsci.2017.05.003 ↗
7. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
8. Hardened austenite steel with columnar sub-grain structure formed by laser melting10.1016/j.msea.2014.12.018 ↗
9. Corrosion behaviour of 316L stainless steel manufactured by selective laser melting10.1002/maco.201910792 ↗
10. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel10.1016/j.scriptamat.2017.07.037 ↗
11. Evaluation of the effect of grain size on chromium carbide precipitation and intergranular corrosion of 316L stainless steel10.1016/j.corsci.2012.09.022 ↗
12. Corrosion properties of powder bed fusion additively manufactured 17-4 PH stainless steel10.5006/2365 ↗
13. The role of microstructure and surface finish on the corrosion of selective laser melted 304L10.1149/2.0431805jes ↗
14. Corrosion of additively manufactured alloys: a review10.5006/2926 ↗
15. A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
16. Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing10.1016/j.corsci.2019.108412 ↗
17. Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting10.1016/j.corsci.2019.04.028 ↗
18. Pitting corrosion
19. An alternative method to determine critical pitting temperature of stainless steels in ferric chloride solution10.1016/0010-938X(94)90109-0 ↗
20. Metastable pitting and the critical pitting temperature10.1149/1.1838691 ↗
21. Dependence of the critical pitting temperature on surface roughness10.1016/S0010-938X(02)00215-9 ↗
22. The relationship between pit chemistry and pit geometry near the critical pitting temperature10.1149/1.2210670 ↗
23. A new criterion to determine the critical pitting temperature (CPT) based on electrochemical noise measurement10.1016/j.corsci.2012.01.026 ↗
24. Statistical study of the critical pitting temperature of 22-05 duplex stainless steel10.1016/j.corsci.2012.03.025 ↗
25. Modeling of the critical pitting temperature between the laboratory-scale specimen and the large-scale specimen10.1149/2.0521807jes ↗
26. Stochastic studies of passivity breakdown10.1016/0010-938X(90)90140-Z ↗
27. Investigation on the effect of nitrate ion on the critical pitting temperature of 2205 duplex stainless steel along a mechanistic approach using pencil electrode10.1016/j.corsci.2014.04.021 ↗
28. The effect of dichromate ion on the pitting corrosion of AISI 316 stainless steel. Part I: Critical pitting temperature10.1016/j.corsci.2015.01.026 ↗
29. Effect of thiosulfate on pitting corrosion of 316SS: I. Critical pitting temperature and pit chemistry10.1149/2.0861501jes ↗
30. Explanation of the effect of high chloride concentration on the critical pitting temperature of stainless steel10.1016/j.corsci.2007.03.026 ↗
31. Investigation of the effect of solution annealing temperature on critical pitting temperature of 2205 duplex stainless steel by measuring pit solution chemistry10.1016/j.corsci.2015.01.051 ↗
32. Localized corrosion: passive film breakdown vs pit growth stability: part II. A model for critical pitting temperature10.1149/2.0591809jes ↗
33. Metastable pitting and the critical pitting temperature10.1149/1.1838691 ↗
34. Pit growth studies in stainless steel foils. II. Effect of temperature, chloride concentration and sulphate addition10.1016/S0010-938X(01)00134-2 ↗
35. Pit growth studies in stainless steel foils. I. Introduction and pit growth kinetics10.1016/S0010-938X(01)00133-0 ↗
36. Deterioration in critical pitting temperature of 904L stainless steel by addition of sulfate ions10.1016/j.corsci.2006.02.010 ↗
37. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
38. Dissolution kinetics of pure zinc: the effect of bulk solution concentration and temperature studied by the lead-in pencil electrode technique10.1149/2.0661713jes ↗
39. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel10.1016/j.jmatprotec.2017.05.042 ↗
40. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L10.1016/j.jallcom.2018.01.098 ↗
41. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
42. Evolution of current transients and morphology of metastable and stable pitting on stainless steel near the critical pitting temperature10.1016/j.corsci.2005.03.002 ↗
43. Effect of pitting nucleation on critical pitting temperature of 316L stainless steel by nitric acid passivation10.1016/j.corsci.2014.11.018 ↗
44. A comparative study of critical pitting temperature (CPT) of stainless steels by electrochemical impedance spectroscopy (EIS), potentiodynamic and potentiostatic techniques10.1016/j.corsci.2012.02.026 ↗
45. Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting10.1016/j.msea.2016.04.086 ↗
46. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts10.1016/j.jmatprotec.2014.06.002 ↗
47. Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing10.1016/j.corsci.2019.108353 ↗
48. Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy10.1016/j.msea.2018.10.083 ↗
49. The dissolution kinetics and salt film precipitation of Zn and Fe in chloride solutions: importance of the common-ion effect and diffusivity10.1016/j.corsci.2018.10.024 ↗
50. Pit transition potential and repassivation potential of stainless steel in thiosulfate solution10.1149/2.0381606jes ↗
51. Diffusional effects in simulated localized corrosion10.1149/1.2134039 ↗
52. Mass transfer and electrochemical kinetic interactions in localized pitting corrosion10.1002/aic.690320605 ↗
53. Temperature dependence of pitting potentials for austenitic stainless steels above their critical pitting temperature10.1016/S0010-938X(98)00020-1 ↗
54. Prediction of maximum pit sizes in elevated chloride concentrations and temperatures10.1149/2.0451911jes ↗
55. Transport processes and the mechanism of pitting of metals10.1149/1.2132857 ↗
56. The solution composition and electrode potential in pits, crevices and cracks10.1016/0010-938X(83)90014-8 ↗
57. Anodic behaviour of stainless steel S43000 in concentrated solutions of sulphuric acid10.1016/S0010-938X(02)00232-9 ↗
58. Anodic polarization behavior of austenitic stainless steel alloys with lower chromium content10.5006/0010-9312-35.10.443 ↗
59. The effect of alloyed nitrogen or dissolved nitrate ions on the anodic behaviour of austenitic stainless steel in hydrochloric acid10.1016/0010-938X(87)90040-0 ↗
60. The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid10.1016/j.apsusc.2018.10.150 ↗
61. Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: pitting mechanism induced by gas pores10.1016/j.corsci.2020.108520 ↗
62. Metastable pitting corrosion of stainless steel and the transition to stability
63. Perspective—localized corrosion: passive film breakdown vs pit growth stability10.1149/2.1381704jes ↗
64. Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel10.1016/j.corsci.2013.11.039 ↗
65. Metastable pitting of stainless steel10.5006/1.3583880 ↗
66. The mechanism of lacy cover formation in pitting10.1016/S0010-938X(97)00043-7 ↗
67. Using pit solution chemistry for evaluation of metastable pitting stability of austenitic stainless steel10.1002/maco.200403827 ↗
68. A study of the solid salt film on nickel and stainless steel10.1016/0013-4686(87)87050-0 ↗
69. The effect of nitrate on salt layers in pitting corrosion of 304L stainless steel10.1149/2.0421509jes ↗
70. Metallurgy of additive manufacturing: examples from electron beam melting
71. The influence of cold plastic deformation on passivity of Ti-6Al-4V alloy studied by electrochemical and local probing techniques10.5006/1794 ↗
72. In situ X‐Ray microprobe study of salt layers during anodic dissolution of stainless steel in chloride solution10.1149/1.2044138 ↗
73. Behavior of dissolved molybdenum during localized corrosion of austenitic stainless steel10.1149/1.1837294 ↗
74. Characterisation of salt films on dissolving metal surfaces in artificial corrosion pits via in situ synchrotron X-ray diffraction10.1016/j.elecom.2008.03.018 ↗
75. Salt films formed during mass transport controlled dissolution of iron-chromium alloys in concentrated chloride media10.1016/0010-938X(94)90023-X ↗
76. Haynes · 2014
77. Application of the pitting resistance equivalent concept to some highly alloyed austenitic stainless steels10.5006/1.3284840 ↗
78. Electrochemical investigation of the influence of nitrogen alloying on pitting corrosion of austenitic stainless steels10.1016/S0010-938X(99)00013-X ↗
79. Stochastic models of pitting corrosion of stainless steels: I. Modeling of the initiation and growth of pits at constant potential10.1149/1.2114220 ↗
80. Effect of thiosulfate on pitting corrosion of 316SS: II. Metastable pitting and transition to stability10.1149/2.0041504jes ↗
81. The effect of dichromate ion on the pitting corrosion of AISI 316 stainless steel Part II: pit initiation and transition to stability10.1016/j.corsci.2015.02.025 ↗
82. A characterization of the inhibiting effect of Cu on metastable pitting in dilute Al–Cu solid solution alloys10.1016/j.electacta.2006.08.054 ↗