High-temperature CMAS resistance performance of Ti2AlC oxide scales
Source abstract
Abstract
Abstract Failure of thermal barrier coatings (TBCs) caused by glassy deposits mostly composed of calcium-magnesium-aluminium-silicate (CMAS) has become an urgent issue. The addition of Al and Ti elements in TBCs is beneficial to improve the CMAS resistance. In this paper, bi-layered oxide scales were formed through pre-oxidation of Ti2AlC (POTAC) bulks at high temperatures. The wettability and spreading behaviors of CMAS on the oxide scales, as well as the interaction between them were investigated by a sessile-drop method. The glassy CMAS deposit on the Al2TiO5 layer revealed the largest equilibrium contact angle and slowest diffusion-limited spreading rate among all the samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
2. Silicate deposit degradation of engineered coatings in gas turbines: progress toward models and materials solutions10.1146/annurev-matsci-010917-105000 ↗
3. A delamination mechanism for thermal barrier coatings subject to calcium-magnesium-alumino-silicate (CMAS) infiltration10.1016/j.actamat.2004.11.028 ↗
4. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
5. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
6. Thermochemical interaction of thermal barrier coatings with molten CaO-MgO-Al2O3-SiO2 (CMAS) deposits10.1111/j.1551-2916.2006.01209.x ↗
7. Erosion behavior of EB-PVD 7YSZ coatings under corrosion/erosion regime: effect of TBC microstructure and the CMAS chemistry10.1016/j.jeurceramsoc.2018.06.039 ↗
8. Mechanisms of cracking and delamination within thick thermal barrier systems in aero-engines subject to calcium-magnesium-alumino-silicate (CMAS) penetration10.1016/j.msea.2008.01.006 ↗
9. Degradation of EB-PVD thermal barrier coatings caused by CMAS deposits10.1016/j.pnsc.2012.06.007 ↗
10. Protectiveness of Pt and Gd2Zr2O7 layers on EB-PVD YSZ thermal barrier coatings against calcium-magnesium-alumina-silicate (CMAS) attack10.1016/j.ceramint.2015.05.128 ↗
11. Electrophoretically deposited alumina as protective overlay for thermal barrier coatings against CMAS degradation10.1016/j.surfcoat.2009.09.055 ↗
12. Enhanced properties of Al-modified EB-PVD 7YSZ thermal barrier coatings10.1016/j.ceramint.2016.05.210 ↗
13. EB-PVD alumina (Al2O3) as a top coat on 7YSZ TBCs against CMAS/VA infiltration: deposition and reaction mechanisms10.1016/j.jeurceramsoc.2018.03.027 ↗
14. Tailoring the EB-PVD columnar microstructure to mitigate the infiltration of CMAS in 7YSZ thermal barrier coatings10.1016/j.jeurceramsoc.2016.07.027 ↗
15. Novel thermal barrier coatings repel and resist molten silicate deposits10.1016/j.scriptamat.2018.12.028 ↗
16. Jet engine coatings for resisting volcanic ash damage10.1002/adma.201004783 ↗
17. Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits10.1016/j.actamat.2007.08.028 ↗
18. Effect of CMAS deposits on MOCVD coatings in the system Y2O3-ZrO2: phase relationships10.1111/jace.12502 ↗
19. Interaction and infiltration behavior of Eyjafjallajokull, Sakurajima volcanic ashes and a synthetic CMAS containing FeO with/in EB-PVD ZrO2-65 wt% Y2O3 coating at high temperature10.1016/j.actamat.2017.06.055 ↗
20. 2ZrO2‧Y2O3 thermal barrier coatings resistant to degradation by molten CMAS: part II, interactions with sand and fly ash10.1111/jace.13209 ↗
21. Synthesis of yttria by aqueous sol-gel route to develop anti-CMAS coatings for the protection of EBPVD thermal barriers10.1016/j.ceramint.2016.05.169 ↗
22. Thermal conductivity and thermal cyclic fatigue of multilayered Gd2Zr2O7/YSZ thermal barrier coatings processed by suspension plasma spray10.1016/j.surfcoat.2015.11.009 ↗
23. Microstructural characterization of GZ/CYSZ thermal barrier coatings after thermal shock and CMAS plus hot corrosion test10.1016/j.jeurceramsoc.2017.02.004 ↗
24. CMAS resistance characteristics of LaPO4/YSZ thermal barrier coatings at 1250 °C–1350 °C10.1016/j.corsci.2019.04.014 ↗
25. Calcium-magnesium-alumino-silicate induced degradation and failure of La2(Zr0.7Ce0.3)2O7/YSZ double-ceramic-layer thermal barrier coatings prepared by electron beam-physical vapor deposition10.1016/j.jeurceramsoc.2017.10.057 ↗
26. Effects of cation substitution and temperature on the interaction between thermal barrier oxides and molten CMAS10.1016/j.jeurceramsoc.2014.09.006 ↗
27. Comparison of CMAS corrosion and sintering induced microstructural characteristics of APS thermal barrier coatings10.1016/j.jmst.2018.09.046 ↗
28. Water vapor effects on the cmas degradation of thermal barrier coatings10.1007/s11085-016-9694-0 ↗
29. The effect of TiO2 additions on CaO-MgO-Al2O3-SiO2 (CMAS) crystallization behavior from the melt10.1111/jace.16180 ↗
30. Molten particulate impact on tailored thermal barrier coatings for gas turbine engine10.1115/1.4037599 ↗
31. Oxidation of Al2O3 scale-forming MAX phases in turbine environments10.1007/s11661-017-4346-9 ↗
32. Thermal cycling testing of TBCs on Cr2AlC MAX phase substrates10.1016/j.surfcoat.2018.02.035 ↗
33. High-temperature oxidation behavior of Ti2AlC in air10.1023/A:1023092027697 ↗
34. Oxidation behavior of Ti2AlC in the temperature range of 1400 °C–1600 °C in steam10.1016/j.jnucmat.2017.03.016 ↗
35. Ti2AlC MAX phase for resistance against CMAS attack to thermal barrier coatings10.1016/j.ceramint.2019.01.059 ↗
36. Versatility of potential protective layer material Ti2AlC on resisting CMAS corrosion to thermal barrier coatings
37. Layered machinable ceramics for high temperature applications10.1016/S1359-6462(96)00418-6 ↗
38. High-temperature wettability and interactions between Hf-containing NbSi-based alloys and Y2O3 ceramics with various microstructures10.1016/j.matdes.2017.10.060 ↗
39. Crystal growth and defects structure of Al3+-doped rutile10.1006/jssc.1998.8088 ↗
40. Abnormal grain growth of rutile TiO2 induced by ZrSiO410.1016/j.jcrysgro.2012.08.015 ↗
41. Reformation of phase composition in decomposed aluminium titanate10.1016/j.matchemphys.2008.03.017 ↗
42. Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics10.1016/j.actamat.2011.03.035 ↗
43. The Al-O-Ti (aluminium-oxygen-titanium) system10.1361/105497102770331271 ↗
44. Thermodynamic modelling of the Al2O3–Ti2O3–TiO2 system and its applications to the Fe–Al–Ti–O inclusion diagram10.2355/isijinternational.49.1290 ↗
45. High temperature healing of Ti2AlC: on the origin of inhomogeneous oxide scale10.1016/j.scriptamat.2011.03.031 ↗
46. Early stages of oxidation of Ti3AlC2 ceramics10.1016/j.matchemphys.2008.06.038 ↗
47. A first-principles investigation of the phase stability of Ti2AlC with Al vacancies10.1016/j.scriptamat.2007.09.048 ↗
48. Reactive wetting of polycrystalline TiC by molten Zr55Cu30Al10Ni5 metallic glass alloy10.1557/jmr.2009.0260 ↗
49. Synthesis and characterization of LTCC composites based on the spodumene/anorthite crystallizable glass10.1016/j.jallcom.2012.12.126 ↗
50. Eustathopoulos · 1999
51. Modelling viscosities of CaO–MgO–Al2O3–SiO2 molten slags10.2355/isijinternational.52.355 ↗