Evidence for Ag participating the electrochemical migration of 96.5Sn-3Ag-0.5Cu alloy
Source abstract
Abstract
Abstract Ag participating the electrochemical migration (ECM) of Sn-Ag based alloys is still controversial. In this work, Ag+ concentration in electrolyte layer and Ag distribution in dendrites formed during the ECM of 96.5Sn-3Ag-0.5Cu alloy were investigated using Inductively Coupled Plasma Source Mass Spectrometer and Scanning Transmission Electron Microscopy, respectively. Results show that Ag+ can only be detected when Ag can release from Ag3Sn during the anodic polarization of 96.5Sn-3Ag-0.5Cu alloy. Under such a condition, Ag could also be found in dendrites. Therefore, it can be concluded that Ag participates the ECM of 96.5Sn-3Ag-0.5Cu alloy, but it is potential-dependent.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. On the electrochemical migration mechanism of tin in electronics10.1016/j.corsci.2011.06.015 ↗
2. Electrochemical migration of Sn and Sn solder alloys: a review10.1039/C7RA04368F ↗
3. Effect of ionization characteristics on electrochemical migration lifetimes of Sn-3.0Ag-0.5Cu solder in NaCl and Na2SO4 solutions10.1007/s11664-008-0491-7 ↗
4. Factors leading to ionic migration in lead-free solder
5. Electrochemical migration of Sn-Pb and lead free solder alloys under distilled water
6. Evaluation of electrochemical migration on printed circuit boards with lead-free and tin-lead solder10.1007/s11664-011-1672-3 ↗
7. Microstructure and elemental composition of electrochemically formed dendrites on lead-free micro-alloyed low Ag solder alloys used in electronics10.1016/j.corsci.2014.11.004 ↗
8. Effect of Ag and Cu additions on the electrochemical migration susceptibility of Pb-free solders in Na2SO4 solution
9. Test methods for electrochemical migration: a review
10. Electrochemical migration of tin in electronics and microstructure of the dendrites10.1016/j.corsci.2011.01.009 ↗
11. The effect of electrolyte layer thickness on electrochemical migration of tin10.1016/j.corsci.2015.04.014 ↗
12. Electrochemical migration, whisker formation, and corrosion behavior of printed circuit board under wet H2S environment10.1016/j.electacta.2013.10.051 ↗
13. The corrosion of tin under thin electrolyte layers containing chloride10.1016/j.corsci.2012.08.040 ↗
14. In situ study of the electrochemical migration of tin under bipolar square wave voltage10.1149/2.1491706jes ↗
15. Corrosion behavior of copper under chloride containing thin electrolyte layer10.1016/j.corsci.2011.06.004 ↗
16. A hierarchical microstructure due to chemical ordering in the bcc lattice: early stages of formation in a ferritic Fe-Al-Cr-Ni-Ti alloy10.1016/j.actamat.2015.03.043 ↗
17. Corrosion behavior of Sn-3.0Ag-0.5Cu alloy under chlorine-containing thin electrolyte layers10.1016/j.corsci.2018.08.041 ↗
18. Electrochemical migration behavior of Cu, Sn, Ag and Sn63/Pb37
19. Comparing migratory resistive short formation abilities of conductor systems applied in advanced interconnection systems10.1016/S0026-2714(00)00093-7 ↗
20. Effect of microstructure and Ag3Sn intermetallic compounds on corrosion behavior of Sn-3.0Ag-0.5Cu lead-free solder
21. Effect of Ag3Sn intermetallic compounds on corrosion of Sn-3.0Ag-0.5Cu solder under high-temperature and high-humidity condition10.1016/j.corsci.2012.05.006 ↗
22. Irregular effect of chloride impurities on migration failure reliability: contradictions or understandable?10.1016/S0026-2714(99)00079-7 ↗