An environmentally acceptable primer for galvanized steel: Formulation and evaluation by SVET
Source abstract
Abstract
The object of this paper was to formulate a two-pack wash primer employing aluminium phosphosilicate as active anticorrosive pigment instead of basic zinc chromate. The anticorrosive action of the primer was evaluated by the polarization technique and the scanning vibrating electrode technique (SVET). The exposed surface was then examined by scanning electron microscopy (SEM) and the surface composition determined by energy dispersive X-ray (EDX) analysis. The primer was finally integrated in a complete paint scheme whose anticorrosive performance was evaluated by the salt spray chamber and electrochemical impedance spectroscopy. The adhesion of the primer plus a painting system was also evaluated by standard ASTM D 3359-90 test method. The wash primer pigmented with zinc chromate was used as reference. Results indicated that basic zinc chromate could be replaced by the more eco-friendly wash-primer containing aluminium phosphosilicate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Surface Roughness and Optical Measurements · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. ASM International Committee, Hot dip coatings, in: ASM Handbook, ninth ed., Metals Handbook, vol. 13, Corrosion, USA, 1992, p. 432.
2. Van Eijnshergen · 1994
3. Painting of weathered hot-dip galvanized steel: its behaviour in cyclic ageing chambers
4. Towards a more corrosion resistant galvanized steel10.5006/0010-9312-36.12.701 ↗
5. R. Werner, Chemical surface treatment of steel coated with zinc and zinc alloys, keynote lecture, in: Proceedings of the International Conference of Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH), The Iron and Steel Institute of Japan, Tokyo, 1989, pp. 197–205.
6. ASM International Handbook Committee, Surface Engineering, in: ASM Handbook (Third Printing), vol. 5, USA, 1994.
7. Investigation of the protective action of chromate coatings on hot-dip galvanized steel: role of wetting agents10.1016/j.corsci.2004.07.001 ↗
8. Effect of molybdate post-sealing on the corrosion resistance of zinc phosphate coatings on hot-dip galvanized steel10.1016/j.corsci.2007.12.002 ↗
9. Corrosion behaviour of molybdate–phosphate–silicate coatings on galvanized10.1016/j.corsci.2009.06.037 ↗
10. Corrosion control of galvanized steel using a phosphate/calcium ion inhibitor mixture10.1016/S0010-938X(02)00130-0 ↗
11. Development of a molybdate–phosphate–silane–silicate (MPSS) coating process for electrogalvanized steel10.1016/j.corsci.2004.11.028 ↗
12. Correlation of interfacial electrode potential and corrosion resistance of plasma polymer coated galvanized steel: Part 1. Ultra-thin plasma polymer films of varying thickness10.1016/j.corsci.2009.09.024 ↗
13. The influence of the primer layer on mechanical damage and loss of corrosion protection of deformed painted Zn–0.16% Al and Zn–5% Al galvanized sheet steel10.1016/0010-938X(94)00116-N ↗
14. Influence of oxidizing ability of the medium on the growth of lanthanide layers on galvanized steel10.1016/j.corsci.2010.01.011 ↗
15. Evaluation of the corrosion performance of coil-coated steel sheet as studied by scanning electrochemical microscopy10.1016/j.corsci.2008.02.019 ↗
16. The effects of immersion time on morphology and electrochemical properties of the Cr(III)-based conversion coatings on zinc coated steel surface10.1016/j.corsci.2008.08.051 ↗
17. Effects of pH of an Na2MoO4–H3PO4 type aqueous solution on the formation of chemical conversion coatings on steels10.1016/0010-938X(89)90047-4 ↗
18. The molybdate–zinc conversion process10.1016/j.corsci.2008.10.019 ↗
19. Cathodic pretreatment of zinc and zinc-coated surfaces10.1016/0010-938X(77)90102-0 ↗
20. The corrosion resistance of hot dip galvanised steel and AA2024-T3 pre-treated with bis-[triethoxysilylpropyl] tetrasulfide solutions doped with Ce(NO3)310.1016/j.corsci.2006.01.010 ↗
21. The development of passivation coatings by cathodic reduction in sodium molybdate solutions10.1016/0010-938X(88)90025-X ↗
22. The corrosion inhibition of zinc with cerous chloride10.1016/0010-938X(89)90087-5 ↗
23. Preparation of chromate-free, self-healing polymer films containing sodium silicate on zinc pretreated in a cerium(III) nitrate solution for preventing zinc corrosion at scratches in 0.5M NaCl10.1016/S0010-938X(01)00138-X ↗
24. Zinc carboxylating: a new conversion treatment of zinc10.1016/S0010-938X(03)00020-9 ↗
25. The inhibition effects of cation inhibitors on corrosion of zinc in aerated 0.5M NaCl10.1016/S0010-938X(00)00144-X ↗
26. Treatment of zinc surface with cerium(III) nitrate to prevent zinc corrosion in aerated 0.5M NaCl10.1016/S0010-938X(00)00189-X ↗
27. 2-Mercaptobenzothiazole monolayers on zinc and silver surfaces for anticorrosion10.1016/j.corsci.2008.08.036 ↗
28. The mode of action of chromate inhibitor in epoxy primer on galvanized steel10.1016/S0300-9440(98)00056-3 ↗
29. Corrosion characteristics of chromate zinc in sodium chloride solutions10.5006/1.3280451 ↗
30. M. Nakasawa, M. Yoneno, Effect of phosphate and silica additives on the performance and structure of chromate conversion coatings, in: Proceedings of the International Conference of Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH), The Iron and Steel Institute of Japan, Tokyo, 1989, pp. 238–245.
31. Procedimiento para proteger el acero galvanizado contra las manchas de humedad producidas durante el almacenamiento
32. The corrosion performance of organosilane based pre-treatments for coatings on galvanised steel10.1016/S0300-9440(99)00080-6 ↗
33. Effective acid pre-treatments for galvanised steel10.1007/BF02699503 ↗
34. Preparation of precipitated metal silicophosphates: Part I. Low temperature synthesis of aluminium silicophosphates
35. Bard · 1995 · 209
36. The use of the scanning vibrating electrode technique for detecting defects in ion vapor-deposited aluminum on steel10.5006/1.3583835 ↗
37. Effect of height on the current distribution measured with a vibrating electrode probe10.1149/1.2085665 ↗
38. Isaacs · 1986 · 17
39. Electric fields and the vibrating probe for the uninitiated
40. F.E. Goodwin, Zinc, in: R. Baboian (Ed.), Corrosion Tests and Standards: Application and Interpretation, ASTM Manual Series MNL, vol. 20, USA, 1965, p. 437.
41. Effect of the plastic deformation on the electrochemical behavior of metal coated steel sheets10.1016/S0257-8972(03)00263-9 ↗
42. Cathodic inhibition of the corrosion of mild steel in phosphate, tungstate, arsenate and silicate solutions containing Ca2+ ions10.1179/bcj.1969.4.5.271 ↗