Corrosion behavior assessment of an Al-Cu alloy manufactured via laser powder bed fusion
Source abstract
Abstract
Additively manufactured Aluminum-Copper alloys are attracting interest because of their high tensile strength. Nevertheless, the presence of Cu strongly affects the corrosion performances. In this work, the corrosion behavior of an innovative laser powder bed fusion-processed 2139 alloy was investigated, and its corrosion performances were compared to the well-consolidated AlSi10Mg alloy, as well as the parent wrought alloy. Electrochemical, Kelvin probe microscopy and intergranular corrosion tests were performed. The unique corrosion morphology at melt pool boundaries are presented and discussed alongside with the effect of surface finishing and heat treatments.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. A review on additive manufacturing and materials for catalytic applications: milestones, key concepts, advances and perspectives10.1016/j.matdes.2021.109927 ↗
2. Overview of non-destructive evaluation techniques for metal-based additive manufacturing10.1080/02670836.2019.1596370 ↗
3. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
4. Evaluation of a laser powder bed fusion designer Al-Mg-Zr-Si alloy for cold spray additive manufacturing10.1016/j.matdes.2022.111105 ↗
5. Standards for additive manufacturing technologies: structure and impact
6. A review on qualification and certification for metal additive manufacturing10.1080/17452759.2021.2018938 ↗
7. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
8. New aluminum alloys specifically designed for laser powder bed fusion: a review10.3390/ma12071007 ↗
9. Relative performance of additively manufactured and cast aluminum alloys10.1007/s11665-020-05403-7 ↗
10. Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition10.1016/j.msea.2021.141679 ↗
11. A metal–metal powder formulation approach for laser additive manufacturing of difficult-to-print high-strength aluminum alloys10.1016/j.matlet.2021.130113 ↗
12. Rapid solidification and non-equilibrium phase constitution in laser powder bed fusion (LPBF) of AlSi10Mg alloy: Analysis of nano-precipitates, eutectic phases, and hardness evolution10.1007/s11661-019-05505-5 ↗
13. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg10.1016/j.actamat.2020.10.001 ↗
14. Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg10.1038/s41598-021-85047-2 ↗
15. Unraveling the low thermal conductivity of the LPBF fabricated pure Al, AlSi12, and AlSi10Mg alloys through substrate preheating
16. Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion
17. Corrosion of additively manufactured alloys: a review10.5006/2926 ↗
18. Influence of powder characteristics on processability of AlSi12 alloy fabricated by selective laser melting10.3390/ma11050742 ↗
19. Effect of process and post-process conditions on the mechanical properties of an A357 alloy produced via laser powder bed fusion10.3390/met7020068 ↗
20. Laser powder bed fusion of nano-CaB6 decorated 2024 aluminum alloy10.1016/j.jallcom.2021.158714 ↗
21. Individual and synergistic effects of thermal and mechanical surface post-treatments on wear and corrosion behavior of laser powder bed fusion AlSi10Mg10.1016/j.jmatprotec.2021.117479 ↗
22. Corrosion resistance in chloride solution of the AlSi10Mg alloy obtained by means of LPBF10.1002/sia.6601 ↗
23. Effects of different mechanical and chemical surface post-treatments on mechanical and surface properties of as-built laser powder bed fusion AlSi10Mg10.1016/j.surfcoat.2022.128391 ↗
24. Corrosion behavior of AlSi10Mg alloy produced by additive manufacturing (AM) vs. its counterpart gravity cast alloy10.3390/met6070148 ↗
25. A comparative study on corrosion and microstructure of direct metal laser sintered AlSi10Mg_200C and die cast A360. 1 aluminum10.1016/j.jmatprotec.2018.04.013 ↗
26. J.E. Hatch, Aluminum: Properties and Physical Metallurgy (Aluminum Association Inc. and ASM International, (1984).
27. A time-saving and cost-effective method to process alloys by Laser Powder Bed Fusion10.1016/j.matdes.2019.107949 ↗
28. Correlation between tensile properties, microstructure, and processing routes of an Al–Cu–Mg–Ag–TiB2 (A205) alloy: Additive manufacturing and casting10.1016/j.msea.2022.142989 ↗
29. Mg-controlled formation of Mg–Ag co-clusters in initial aged Al–Cu–Mg–Ag alloys10.1016/j.jallcom.2014.03.008 ↗
30. Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing10.1016/j.msea.2015.08.088 ↗
31. Effect of compositional changes on microstructure in additively manufactured aluminum alloy 213910.1016/j.matchar.2018.04.002 ↗
32. Effect of process parameters and grain refinement on hot tearing susceptibility of high strength aluminum alloy 2139 in laser powder bed fusion
33. Corrosion Resistance of Aluminum-Copper Alloys with Different Grain Structures10.1007/s11665-020-05344-1 ↗
34. Corrosion behavior of hypoeutectic Al-Cu alloys in H2SO4 and NaCl solutions10.1016/S1006-7191(08)60095-2 ↗
35. Electrodissolution studies of three aluminum alloys in acid, neutral and alkaline solutions
36. Electrochemical behaviour of AA2198 and AA2139 in neutral solutions10.1002/maco.201408059 ↗
37. On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties10.3390/ma10010076 ↗
38. MPB characteristics and Si morphologies on mechanical properties and fracture behavior of SLM AlSi10Mg10.1016/j.msea.2021.141602 ↗
39. Selective laser melting of aluminum die-cast alloy—Correlations between process parameters, solidification conditions, and resulting mechanical properties10.2351/1.4906389 ↗
40. O. Cavusoglu, A.G. Leacock, H. Gurun, A. Gural, Strain-rate-dependent tensile characteristics of AA2139-T351 aluminum alloy, (2017) doi:10.17222/mit.2016.009.10.17222/mit.2016.009 ↗
41. Corrosion behavior of AlSi10Mg alloy produced by laser powder bed fusion under chloride exposure10.1016/j.corsci.2019.03.010 ↗
42. Sequence of steps in the pitting of aluminum by chloride ions10.1016/S0010-938X(02)00231-7 ↗
43. Towards understanding micro-galvanic activities in localised corrosion of AA2099 aluminium alloy10.1016/j.electacta.2021.139005 ↗
44. Electrochemical characteristics of the Al2Cu, Al3Ta and Al3Zr intermetallic phases and their relevancy to the localized corrosion of Al alloys10.1016/0010-938X(93)90148-A ↗
45. Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion10.1149/1.1869984 ↗
46. SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al–Li alloys used in aircraft fabrication10.1016/j.corsci.2014.03.001 ↗
47. Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy10.1016/j.electacta.2016.04.157 ↗
48. Orazem · 2008
49. Effect of heat treatment on microstructure and selective corrosion of LPBF-AlSi10Mg by means of SKPFM and exo-electron emission10.3390/ma14195602 ↗
50. Local corrosion behavior of additive manufactured AlSiMg alloy assessed by SEM and SKPFM10.1149/2.0461702jes ↗
51. Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg10.1016/j.corsci.2018.11.038 ↗
52. Influence of Si content on the microstructure and corrosion behavior of additive manufactured Al-Si alloys10.1149/2.0101814jes ↗
53. Characterization of AA2024–T3 by scanning kelvin probe force microscopy10.1149/1.1838633 ↗
54. Combined effect of Ag and Mg additions on localized corrosion behavior of Al-Cu alloys with high Cu content10.1007/s11665-020-05072-6 ↗
55. A study of corrosion and pitting initiation of AA2024-T3 using atomic force microscopy10.1149/1.1471546 ↗