The effect of cooling rate-induced microstructural changes on CO2 corrosion of low alloy steel
Source abstract
Abstract
The effect of cooling rate-induced microstructural changes on corrosion resistance in a CO2-saturated 3.5 wt% NaCl solution have been explored for the API L80–1Cr steel. The corroded layer majorly contains siderite, akagenite, and undissolved cementite. The amount of FeCO3 in this layer is larger for the water-cooled sample with a martensitic structure, whereas the furnace-cooled sample with a ferritic-pearlitic structure contains a larger amount of akagenite. The retained cementite and the microrough surface of the furnace-cooled sample provide greater anchoring to the scale. Comparing samples cooled at different rates, the furnace-cooled condition appears to provide better CO2 corrosion resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Corrosion problems during oil and gas production and its mitigation
2. Corrosion in petroleum production operations
3. Carbon dioxide corrosion of oil and gas field equipment10.1007/s11124-005-0011-6 ↗
4. Carbon dioxide corrosion in oil and gas production—a compendium10.5006/1.3277596 ↗
5. Carbon steel corrosion: a review of key surface properties and characterization methods10.1039/C6RA25094G ↗
6. A. Dugstad, H. Hemmer, M. Seiersten, Effect of steel microstructure upon corrosion rate and protective iron carbonate film formation, NACE - Int. Corros. Conf. Ser. 2000-March (2000).10.5006/C2000-00024 ↗
7. The influence of microstructure and chemical composition of carbon and low alloy steels in CO2 corrosion. A state-of-the-art appraisal10.1016/S0261-3069(03)00158-4 ↗
8. M. Ueda, H. Takabe, Effect of environmental factor and microstructure on morphology of corrosion products in CO2 environments, in: Corrosion 99, 1999.10.5006/C1999-99013 ↗
9. Fe3C influence on the corrosion rate of mild steel in aqueous CO2 systems under turbulent flow conditions10.1016/S0010-938X(01)00141-X ↗
10. J.L. Crolet, N. Thevenot, S. Nesic, Role of conductive corrosion products on the protectiveness of corrosion layers, NACE - Int. Corros. Conf. Ser. 1996-March (1996) 194–203.10.5006/C1996-96004 ↗
11. Carbon dioxide corrosion of carbon steel in two-phase flow10.5006/1.3293548 ↗
12. Effect of microstructure and Cr content in steel on CO2 corrosion
13. Characteristics of corrosion scales on steels in a CO2-saturated NaCl brine10.5006/1.3585227 ↗
14. The effect of pre-corrosion and steel microstructure on inhibitor performance in CO2 corrosion10.1016/j.corsci.2008.06.031 ↗
15. The influence of steel microstructure, chemical composition and pre-corrosion on CO2 corrosion inhibitor efficiency
16. F. Farelas, B. Brown, S. Nesic, Iron carbide and its influence on the formation of protective iron carbonate in CO2 corrosion of mild steel, NACE - Int. Corros. Conf. Ser. (2013) 1–15.10.5006/C2013-02291 ↗
17. Effect of microstructure on corrosion of steels in aqueous solutions containing carbon dioxide10.5006/1.3284876 ↗
18. The influence of steel microstructure on CO2 corrosion. EIS studies on the inhibition efficiency of benzimidazole10.1016/S0013-4686(02)00776-4 ↗
19. The influence of carbon steel microstructure on corrosion layers: an XPS and SEM characterization10.1016/S0169-4332(02)01218-7 ↗
20. Quenchant oil viscosity and tempering temperature effect on mechanical properties of 42CrMo4 steel10.1016/j.jmrt.2021.11.152 ↗
21. Characterization of carbon-rich phases in a complex microstructure of a commercial X80 pipeline steel10.1007/s11665-016-2119-z ↗
22. Chemistry and three-dimensional morphology of martensite-austenite constituent in the bainite structure of low-carbon low-alloy steels10.1016/j.actamat.2017.11.036 ↗
23. A review of iron carbonate (FeCO3) formation in the oil and gas industry10.1016/j.corsci.2018.07.021 ↗
24. Mechanism of protective film formation during CO2 corrosion of X65 pipeline steel
25. The effects of temperature and pH on the characteristics of corrosion product in CO2 corrosion of grade X70 steel10.1016/j.matdes.2010.01.038 ↗
26. Modeling of uniform CO2 corrosion of mild steel in gas transportation systems: a review10.1016/j.jngse.2015.12.052 ↗
27. The formation mechanism of corrosion scale and electrochemical characteristic of low alloy steel in carbon dioxide-saturated solution10.1016/j.corsci.2011.12.025 ↗
28. The electrode kinetics of the deposition and dissolution of iron10.1016/0013-4686(61)80026-1 ↗
29. A theoretical treatment of the kinetics of iron dissolution and passivation10.1016/0013-4686(75)90005-5 ↗
30. Effect of salt concentration on the corrosion behavior of carbon steel in CO2 environment10.5006/1910 ↗
31. Corrosion behavior of steels for CO2 injection10.1016/j.psep.2013.07.002 ↗
32. Corrosion behaviour of Cr13 steel in CO2 saturated brine with high chloride concentration10.1002/maco.201005932 ↗
33. Effect of temperature on copper corrosion in high-level nuclear waste environment10.1016/S1003-6326(17)60165-1 ↗
34. Z. Ahmad, Principles of corrosion engineering and corrosion control, in: 2007: pp. 57–119. https://doi.org/10.1016/B978–0-7506–5924-6.50004–0.10.1016/B978-075065924-6/50004-0 ↗
35. Effect of temperature on corrosion of metals by water10.1021/ie50512a020 ↗
36. S. Yean, H. Al Saiari, A.T. Kan, M.B. Tomson, Ferrous carbonate nucleation and inhibition, Soc. Pet. Eng. - 9th Int. Conf. Oilf. Scale 2008 - “Managing Scale Through F. Lifetime.” (2008) 531–549. https://doi.org/10.2118/114124-ms.10.2118/114124-MS ↗
37. M.B. Tomson, M.L. Johnson, How ferrous carbonate kinetics impacts oilfield corrosion, (1991) 257–264. https://doi.org/10.2523/21025-ms.10.2118/21025-MS ↗
38. Iron carbonate formation kinetics onto corroding and pre-filmed carbon steel surfaces in carbon dioxide corrosion environments10.1016/j.apsusc.2018.10.238 ↗
39. An electrochemical and X-ray computed tomography investigation of the effect of temperature on CO2 corrosion of 1Cr carbon steel10.1016/j.corsci.2020.108471 ↗
40. A. Dugstad, Fundamental aspects of CO2 metal loss corrosion, part I: Mechanism, in: NACE - Int. Corros. Conf. Ser., 2015.10.5006/C2015-05826 ↗
41. A mechanistic model for carbon dioxide corrosion of mild steel in the presence of protective iron carbonate films—part 1: theory and Verification10.5006/1.3277576 ↗
42. A mechanistic model for carbon dioxide corrosion of mild steel in the presence of protective iron carbonate films—part 2: a Numerical Experiment10.5006/1.3277579 ↗
43. Relating iron carbonate morphology to corrosion characteristics for water-saturated supercritical CO2 systems10.1016/j.supflu.2014.12.009 ↗
44. In situ synchrotron X-ray diffraction study of the effect of microstructure and boundary layer conditions on CO2 corrosion of pipeline steels10.1016/j.corsci.2014.10.010 ↗
45. Effect of tempering heat treatment on the CO2 corrosion resistance of quench-hardened Cr-Mo low-alloy steels for oil and gas applications10.1016/j.corsci.2019.03.036 ↗
46. Corrosion behaviour of tempered 42CrMo4 steel
47. An investigation on dislocation density in cold-rolled copper using electrochemical impedance spectroscopy
48. Variations of work function and corrosion behaviors of deformed copper surfaces10.1016/j.apsusc.2004.07.017 ↗
49. Corrosion behavior of low-alloy steel containing 1% chromium in CO2 environments10.1016/j.corsci.2013.06.024 ↗
50. Influence of heat treatment on the corrosion of high speed steel10.1023/A:1004157623466 ↗
51. Effect of Cr content on the corrosion performance of low-Cr alloy steel in a CO2 environment10.1016/j.apsusc.2016.04.049 ↗
52. Effect of free Cr content on corrosion behavior of 3Cr steels in a CO2 environment10.1016/j.apsusc.2017.06.320 ↗
53. On the theory of CO2 corrosion reactions - investigating their interrelation with the corrosion products and api-x100 steel microstructure10.1016/j.corsci.2014.04.055 ↗
54. Characterization, formation and development of scales on L80 steel tube resulting from seawater injection treatment10.1016/j.petrol.2020.107433 ↗
55. Role of alloyed copper on corrosion resistance of austenitic stainless steel in H2S-Cl- environment10.1016/j.corsci.2013.12.013 ↗
56. First stages of siderite crystallisation during CO2 corrosion of steel evaluated using in situ synchrotron small- and wide-angle X-ray scattering10.1039/C4FD00218K ↗
57. Corrosion of alloy steels containing 2% chromium in CO2 environments10.1016/j.corsci.2012.06.006 ↗
58. Effect of flow and steel microstructure on the formation of iron carbonate10.5006/3118 ↗