Corrosion mechanisms in model binary metallic glass coatings on mild steel and correlation with electron work function
Source abstract
Abstract
Effect of chemistry change on corrosion mechanisms and passive film characteristics of model Ni-P and Co-P metallic glass coatings on mild steel was studied because of their simple chemistry and widespread use. Increase in phosphorus content led to improved corrosion resistance. Results indicated the presence of hypophosphite and phosphate anions on the corroded surfaces. Enrichment of phosphorus in the passive layer was observed, which likely promoted the restoration of the protective hypophosphite anion layer during dissolution. A correlation between electronic structure and corrosion resistance was established, with relative work function increasing with increase in phosphorus content.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Non-crystalline structure in solidified gold–silicon alloys10.1038/187869b0 ↗
2. Bulk metallic glass matrix composites10.1063/1.120512 ↗
3. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
4. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
5. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
6. Suryanarayana · 2017
7. Bulk metallic glasses as structural materials: a review10.1002/adem.201600066 ↗
8. Amorphous metallic alloys: pathways for enhanced wear and corrosion resistance10.1007/s11837-017-2384-9 ↗
9. Zirconium based bulk metallic glass—Better resistance to slurry erosion compared to hydroturbine steel10.1016/j.wear.2013.08.016 ↗
10. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
11. The case for bulk metallic glass10.1016/S1369-7021(04)00124-5 ↗
12. Thermoplastic forming of bulk netallic glass - A technology for MEMS and microstructure fabrication10.1109/JMEMS.0007.892889 ↗
13. Processing of bulk metallic glass10.1002/adma.200902776 ↗
14. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
15. Deformation behavior of metallic glass composites and plasticity accommodation at microstructural length-scales
16. Amorphous Coatings and Surfaces on Structural Materials10.1080/10408436.2015.1053602 ↗
17. Formation and tribological behavior of AC-HVAF-sprayed nonferromagnetic Fe-based amorphous coatings10.1016/j.surfcoat.2017.11.042 ↗
18. Fatigue property improvements of Ti-6Al-4V by thin film coatings of metallic glass and TiN: A comparison study10.1016/j.tsf.2013.08.027 ↗
19. Devitrification of arc-sprayed FeBSiNb amorphous coatings: Effects on wear resistance and mechanical behavior10.1016/j.surfcoat.2013.08.054 ↗
20. Optimization of laser thermal treatment of Fe–Si–B metallic glass10.1016/j.jmapro.2016.07.004 ↗
21. Nanomanufacturing of Non-Noble Amorphous Alloys for Electrocatalysis10.1021/acsaem.0c02221 ↗
22. Multiscale manufacturing of amorphous alloys by a facile electrodeposition approach and their property dependence on the local atomic order
23. Highly catalytic amorphous Ni–P synthesized via pulsed electrodeposition10.1002/adem.201801122 ↗
24. Small-Scale Mechanical Behavior of Ion-Irradiated Bulk Metallic Glass
25. Hasannaeimi · 2021
26. Preparation and magnetic properties of amorphous NiP and CoP nanowire arrays10.1016/j.jmmm.2003.12.540 ↗
27. Electrical properties of electroless Ni-P thin films10.1016/0013-4686(86)80060-3 ↗
28. Electroless nickel:defects, passivity and localized corrosion
29. Electrodeposited metallic glasses with superlative wear resistance10.1016/j.msea.2021.141315 ↗
30. Determining the Role of W in Suppressing Crystallization of Electroless Ni–W–P Films10.1149/1.2193332 ↗
31. Visualization of Kirkendall Voids at Cu-Au Interfaces by In Situ TEM Heating Studies10.1007/s11837-019-03708-0 ↗
32. Effect of phosphorus on anodic dissolution and passivation of nickel in near-neutral solutions10.5006/1.3583006 ↗
33. An XPS Investigation into the Passivity of an Amorphous Ni‐20P Alloy10.1149/1.2095880 ↗
34. The anodic behavior of amorphous Ni-19P alloys in different amorphous states10.1016/0010-938X(89)90122-4 ↗
35. The Anodic Polarization Behavior of Fe-Ni-P-B and Fe-Ni-Cr-P-B Amorphous Alloys10.5006/1.3581928 ↗
36. Ratzker, Menahem, David S. Lashmore, and John A. Tesk. "Electroforming of metallic glasses for dental applications." U.S. Patent 5,316,650, issued May 31, 1994.
37. Amorphous structures and kinetics of phosphorous incorporation in electrodeposited Ni-P thin films10.1149/1.1545459 ↗
38. Eds. Schlesinger, Mordechay, and Milan Paunovic, Modern Electroplating: Fifth Edition, Vol. 55 (2010) 2011, doi: 10.1002/9780470602638.10.1002/9780470602638 ↗
39. Some theoretical aspects of pulse electrolysis10.1016/0376-4583(80)90056-4 ↗
40. Corrosion behavior of selectively laser melted CoCrFeMnNi high entropy alloy
41. Aqueous passivation of multi-principal element alloy Ni38Fe20Cr22Mn10Co10: Unexpected high Cr enrichment within the passive film10.1016/j.actamat.2020.07.024 ↗
42. Electrochemical nickel-phosphorus alloy formation10.1179/095066003225008482 ↗
43. Effect of temperature and dissolved oxygen on the passivation behavior of Ti–6Al–3Nb–2Zr–1Mo alloy in artificial seawater10.1016/j.jmrt.2022.01.018 ↗
44. Effect of high temperature on the corrosion behavior and passive film composition of 316 L stainless steel in high H2S-containing environments10.1016/j.corsci.2020.108844 ↗
45. An introduction to electrochemical corrosion testing for practicing engineers and scientists10.1016/0300-9440(95)90005-5 ↗
46. Corrosion resistance enhancement of electroless Ni-P coating by incorporation of ultrasonically dispersed diamond nanoparticles10.1016/j.corsci.2013.07.046 ↗
47. Ultrasonic-Assisted Electroless Ni-P Plating on Dual Phase Mg-Li Alloy10.1149/2.0841501jes ↗
48. Surface degradation mechanisms in a eutectic high entropy alloy at microstructural length-scales and correlation with phase-specific work function10.1038/s41529-019-0079-0 ↗
49. Influence of grain refinement on the electrochemical behavior of AISI 430 ferritic stainless steel in an alkaline solution10.1016/j.apsusc.2015.11.085 ↗
50. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
51. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
52. Corrosion resistance enhancement of electroless Ni–P coating by incorporation of ultrasonically dispersed diamond nanoparticles10.1016/j.corsci.2013.07.046 ↗
53. Electrochemical Impedance Spectroscopy, Electrochemical Impedance
54. C. Hsu, F.M.- Corrosion, Concerning the conversion of the constant phase element parameter Y0 into a capacitance, Corrosion 57 (9) (2001) 747–748, doi:10.5006/1.3280607.10.5006/1.3280607 ↗
55. Synthesis, characterization, and application of novel Ni-P-carbon nitride nanocomposites10.3390/coatings8010037 ↗
56. Impedance spectroscopy studies of electroless Ni-P matrix, Ni-W-P, Ni-P-ZrO2, and Ni-W-P-ZrO2 coatings exposed to 3.5% NaCl solution10.1002/maco.201206856 ↗
57. Eis study of heat-treated Al-Zn-Mg alloys in the passive and transpassive potential regions10.1016/0013-4686(94)00299-G ↗
58. Dielectric Properties of Materials Showing Constant-Phase-Element (CPE) Impedance Response10.1149/2.033306jes ↗
59. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
60. Presentation of an Atlas of chemical and electrochemical equilibria in the presence of a gaseous phase10.4028/www.scientific.net/MSF.251-254.143 ↗
61. Role of Photoexcitation and Field Ionization in the Measurement of Accurate Oxide Stoichiometry by Laser-Assisted Atom Probe Tomography10.1021/jz400015h ↗
62. Atom probe tomography quantification of carbon in silicon10.1016/j.ultramic.2020.113153 ↗
63. Atom probe tomography: development and application to the geosciences10.1111/ggr.12313 ↗
64. XPS analysis of passive films on the amorphous alloy Fe70Cr10P13C7: Effect of the applied potential10.1002/sia.740180708 ↗
65. XPS analytical characterization of amorphous alloys: Fe7 Cr oP C710.1002/sia.740151106 ↗
66. A Study of Corrosion and Pitting Initiation of AA2024-T3 Using Atomic Force Microscopy10.1149/1.1471546 ↗
67. Electrochemical and Friction Characteristics of Metallic Glass Composites at the Microstructural Length-scales
68. Characterization of AA2024–T3 by Scanning Kelvin Probe Force Microscopy10.1149/1.1838633 ↗
69. Unusual Correlation between SKPFM and Corrosion of Nickel Aluminum Bronzes10.1149/2.0391709jes ↗
70. High-resolution Kelvin probe microscopy in corrosion science: Scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP10.1016/j.electacta.2007.03.016 ↗
71. The physical meaning of electrode potentials at metal surfaces and polymer/metal interfaces: consequences for delamination10.1149/1.2926589 ↗
72. X-ray absorption and photoelectron spectroscopy investigation of binary Nickelphosphides10.1016/S1386-1425(97)00040-1 ↗
73. Characterization of surfaces of amorphous Ni-Fe- P alloys10.1016/0022-3093(84)90212-6 ↗
74. Characterization of surface films on FeCrPC alloys by XPS and X-ray excited Auger peaks