Effect of liquid oxy-nitriding at various temperatures on wear and molten aluminum corrosion behaviors of AISI H13 steel
Source abstract
Abstract
Abstract In this study, liquid oxy-nitriding (LON) at different temperatures (430 °C, 450 °C, 470 °C) was employed on the AISI H13 steel. Effects of LON on wear and molten aluminum corrosion of AISI H13 steel were investigated. LON treatments significantly improved wear resistance due to synergy between high-hardness nitriding layer and lubricating oxide film. Molten aluminum corrosion resistance was also improved, especially by LON 470 treatment. Fe3O4 film and nitriding layer on LON 470 transformed the corrosion mechanisms from dissolution into oxidation. Therefore, LON process may be a choice for combating the dissolution corrosion of liquid metals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Recycling and downstream processing of aluminium alloys for automotive applications
2. Recent developments in powder metallurgy based aluminium alloy composite for aerospace applications10.1016/j.matpr.2019.07.568 ↗
3. 24 - application of modern aluminium alloys to aircraft
4. Development and processing of novel aluminum powder metallurgy materials for heat sink applications10.1007/s11661-013-2011-5 ↗
5. Scale up and application of equal-channel angular extrusion for the electronics and aerospace industries10.1016/j.msea.2007.04.133 ↗
6. A review on forming techniques for manufacturing lightweight complex—shaped aluminium panel components
7. 3 - aluminum alloys for lightweight automotive structures
8. 6 - casting of aluminium alloys
9. A study of die failure mechanisms in aluminum extrusion10.1016/S0924-0136(02)01116-0 ↗
10. Influence of the nitriding time in the wear behaviour of an AISI H13 steel during a crankshaft forging process10.1016/j.wear.2007.02.007 ↗
11. Mechanisms of soldering formation on coated core pins10.1007/s11661-011-0865-y ↗
12. Dissolution and erosion behavior of AISI H13 shot sleeve in high pressure die casting process10.1016/j.engfailanal.2019.02.021 ↗
13. Surface modification of steel and cast iron to improve corrosion resistance in molten aluminium10.1016/j.surfcoat.2005.06.026 ↗
14. High temperature wear and friction behaviour of nitrided, PVD-duplex and CVD coated tool steel against 6082 Al alloy10.1016/j.wear.2011.01.067 ↗
15. 2 - kinetics of thermochemical surface treatments
16. Performance of gas nitrided and AlTiN coated AISI H13 hot work tool steel in aluminium extrusion10.1016/j.surfcoat.2012.07.051 ↗
17. Depth distribution of martensite in plasma nitrided AISI H13 steel and its correlation to hardness10.1016/j.surfcoat.2015.02.046 ↗
18. Combat molten aluminum corrosion of AISI H13 steel by low-temperature liquid nitrocarburizing10.1016/j.jallcom.2018.10.298 ↗
19. Effect of high temperature post-oxidizing on tribological and corrosion behavior of plasma nitrided AISI 316 austenitic stainless steel10.1016/j.vacuum.2010.08.008 ↗
20. The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel10.1016/j.apsusc.2013.06.152 ↗
21. A comparative study of salt-bath nitrocarburizing and gas nitriding followed by post-oxidation used as surface treatments of H13 hot forging dies10.1016/j.surfcoat.2016.08.003 ↗
22. Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation10.1016/j.surfcoat.2020.125420 ↗
23. A review of steel corrosion by liquid lead and lead–bismuth10.1016/j.corsci.2009.03.013 ↗
24. Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air10.1016/j.corsci.2015.08.014 ↗
25. Enhancement of corrosion resistance of Fe–Cr–Mo alloy to molten Al by thermal oxidation in air10.1016/j.corsci.2013.07.031 ↗
26. Improvement of aluminum erosion behavior and corrosion resistance of AISI H13 tool steel by oxidation treatment10.2355/isijinternational.50.569 ↗
27. Interfacial reactions between molten Al and a Co–Cr–Mo alloy with and without oxidation treatment10.1016/j.corsci.2011.08.015 ↗
28. Effects of post-oxidizing treatment on melting loss and corrosion resistance of gas nitrided AISI H13 tool steel10.2355/isijinternational.52.499 ↗
29. Enhancement of erosion resistance on AISI H13 tool steel by oxynitriding treatment10.2355/isijinternational.49.421 ↗
30. Surface microstructural evolution of AISI 304 L stainless steel oxy-nitrocarburized in a cyanide-free salt bath and its potential application in solar collectors10.1016/j.surfcoat.2018.08.078 ↗
31. J. Wang, J. Xiong, H. Fan, Low-temperature salt bath nitriding of austenitic stainless steel workpiece involves cleaning, drying preheating, nitriding using austenitic stainless steel low-temperature salt bath nitriding salt, cooling, drying and polishing, Univ Sichuan (Uscu-C).
32. Epitaxial growth and band alignment of p-NiO/n-Fe2O3 heterojunction on Al2O3(0 0 0 1)10.1016/j.apsusc.2018.09.106 ↗
33. A review of Fe3O4 thin films: synthesis, modification and applications10.1016/j.jmst.2018.01.011 ↗
34. Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steel10.1016/j.wear.2003.07.006 ↗
35. On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys10.1016/j.actamat.2010.11.023 ↗
36. On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys10.1016/j.actamat.2015.06.028 ↗
37. Experimental and theoretical research on the corrosion resistance of ferrous alloys in aluminum melts10.1007/s11661-019-05379-7 ↗
38. Multi-method identification and characterization of the intermetallic surface layers of hot-dip Al-coated steel: FeAl3 or Fe4Al13 and Fe2Al5 or Fe2Al5+x10.1016/j.surfcoat.2017.05.091 ↗
39. Crystallography of Fe2Al5 phase at the interface between solid Fe and liquid Al10.1016/j.intermet.2015.07.011 ↗
40. Growth kinetics and thickness prediction of interfacial intermetallic compounds between solid steel and molten aluminum based on thermophysical simulation in a few seconds10.1016/j.matchar.2017.09.012 ↗
41. Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys10.1016/j.msea.2011.02.057 ↗
42. Interaction between the growth and dissolution of intermetallic compounds in the interfacial reaction between solid Iron and liquid aluminum10.1007/s11661-016-3667-4 ↗
43. Growth behavior of Fe2Al5 during reactive diffusion between Fe and Al at solid-state temperatures10.1016/j.msea.2007.01.099 ↗
44. Effect of silicon, manganese and nickel present in iron on the intermetallic growth at iron - aluminum alloy interface10.1016/j.jallcom.2018.07.364 ↗
45. Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel10.1016/j.apsusc.2017.03.185 ↗
46. Synthesis and characterization of nanocrystalline α-Al2O3 using Al and Fe2O3 (hematite) through mechanical alloying10.1016/j.solidstatesciences.2008.06.021 ↗
47. Investigation of dissolution resistance of blank and gas-nitrided carbon steels in stationary SAC305 solder alloy melt10.2298/JMMB170918019B ↗
48. Reactive wetting and filling of boron nitride nanotubes by molten aluminum during equilibrium solidification10.1016/j.actamat.2016.12.034 ↗
49. Investigation of surface modifications for combating the molten aluminum corrosion of AISI H13 steel10.1016/j.corsci.2020.108836 ↗
50. Liquid metal embrittlement of an Fe10Cr4Al ferritic alloy exposed to oxygen-depleted and -saturated lead-bismuth eutectic at 350 °C10.1016/j.corsci.2019.108364 ↗