Importance of the surface and environmental conditions on the corrosion behavior of brass, steel and brass coated steel wires and brass coated steel cords
Source abstract
Abstract
Abstract In tires, cords consist of brass coated wires. Even if they are embedded in rubber matrix, wires remain sensitive to corrosion. This work proposes an evaluation of the electrochemical reactivity of the constituents of the wire: the steel, the brass, and the brass coated steel. Tests were immersed in solutions where pH, solution convection, and oxidizing species were controlled. Results confirm the establishment of galvanic coupling between iron and brass. In aerated and neutral solution, the dissolve dioxygen reduction acts on the interfacial pH modifying the reactivity of the brass coated steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. 2006
2. Experimental observation of induced-charge electro-osmosis around a metal wire in a microchannel10.1016/j.colsurfa.2005.06.050 ↗
3. The effect of fluid flow on growth of single corrosion pits10.1016/0010-938X(89)90078-4 ↗
4. Corrosion resistance of porous ferritic stainless steel produced by liquid metal dealloying of Incoloy 80010.1016/j.corsci.2020.108468 ↗
5. Electrodeposition of graphite-brass composite coatings and characterization of the tribological properties10.1016/S0257-8972(01)01322-6 ↗
6. Microstructure and corrosion behaviour of deformed pearlitic and brass-coated pearlitic steels in sodium chloride solution
7. Fundamental aspects of rubber adhesion to brass-plated steel tire cords10.5254/1.3535231 ↗
8. Steel tire cord-rubber adhesion, including the contribution of cobalt10.5254/1.3547891 ↗
9. Corrosion behaviour of heavily deformed pearlitic and brass-coated pearlitic steels in sodium chloride solutions10.1016/j.corsci.2014.06.002 ↗
10. An investigation on the corrosion of brass-coated steel cords for tyres by electrochemical techniques10.1016/S0010-938X(00)00093-7 ↗
11. Corrosion behaviour of rubber-metal composites in sodium chloride solution and role of inhibitors added in the rubber or in the solution10.1016/j.electacta.2019.03.099 ↗
12. The electrochemical behaviour of leaded brass in neutral CL− and SO4− media10.1016/0010-938X(95)00083-V ↗
13. A study of the kinetics and mechanism of brass dezincification by radiotracer and electrochemical methods10.1016/0013-4686(81)80025-4 ↗
14. Electrochemical studies of the kinetics and mechanism of brass dezincification10.1016/0013-4686(82)85025-1 ↗
15. Effects of Zn and Pb as alloying elements on the electrochemical behaviour of brass in borate solutions10.1023/A:1017566615843 ↗
16. The electrochemical behavior of α,β′-Brass in basic NaNO3 solutions10.1149/2.0181512jes ↗
17. An in situ kinetic study of brass dezincification and corrosion10.1016/j.electacta.2017.01.078 ↗
18. Comparison of the spontaneous and anodic processes during dissolution of brass10.1016/S0010-938X(00)00130-X ↗
19. Adhesion and corrosion properties of a new NiZn/ZnCo-coated steel tire cord10.1016/0257-8972(92)90383-L ↗
20. Raman mapping of corrosion products formed onto spring steels during salt spray experiments. A correlation between the scale composition and the corrosion resistance10.1016/j.corsci.2008.09.027 ↗
21. Corrosion mechanisms and products of copper in aqueous solutions at various pH values10.5006/1.3280482 ↗
22. Electrochemical behaviour of copper–nickel alloys as immobilisation matrices for the storage of fission products in CO2-enriched synthetic groundwater10.1016/j.electacta.2013.03.034 ↗
23. Effect of interfacial pH on the reduction of oxygen on copper in neutral NaClO4 solution10.1016/0022-0728(94)03704-7 ↗
24. The role of the brass surface composition with regard to steel cord rubber adhesion10.1177/009524437801000304 ↗
25. p-Type and n-type Cu2O semiconductor thin films: controllable preparation by simple solvothermal method and photoelectrochemical properties10.1016/j.electacta.2010.12.054 ↗
26. n-Type conductivity of CuO thin films by metal doping
27. Electrochemical behavior of brass in 0.1 M NaCl10.1016/S0169-4332(02)00258-1 ↗
28. Corrosion behavior of α,β’-brass in NaNO3 solutions10.1149/06426.0111ecst ↗
29. Electrochemical corrosion of unalloyed copper in chloride media––a critical review10.1016/S0010-938X(02)00257-3 ↗
30. The electrode kinetics of oxygen reduction: a case study. The corrosion of copper and its alloys in aqueous chloride solution at a smooth rotating disc electrode
31. Influence of stainless steel surface treatment on the oxygen reduction reaction in seawater10.1016/S0010-938X(00)00113-X ↗
32. Electrochemical studies on the corrosion of brass in seawater under anaerobic conditions
33. Dezincification of brass10.1016/S0010-938X(67)80090-8 ↗
34. Long-term atmospheric corrosion of mild steel10.1016/j.corsci.2010.10.007 ↗
35. Native oxide layers formed on the surface of ultra high-purity Iron and copper investigated by angle resolved XPS10.2320/matertrans1989.38.1004 ↗
36. Nature of atmospheric rust on iron10.1149/1.2129376 ↗
37. The mechanism of oxygen reduction on Iron in neutral solutions10.1149/1.2109021 ↗
38. Oxygen reduction on copper in neutral NaCl solution10.1016/0022-0728(94)03705-8 ↗
39. Oxygen reduction on Cu–Zn alloys10.1007/s10800-008-9650-z ↗
40. An investigation of the corrosion of pure iron by electrochemical techniques and in situ observations10.1016/0010-938X(93)90254-E ↗
41. Hydrodynamic effect on the behaviour of a corrosion inhibitor film: characterization by electrochemical impedance spectroscopy10.1016/j.electacta.2005.11.020 ↗
42. Correlation between predictive and descriptive models to characterize the passive film – study of pure chromium by electrochemical impedance spectroscopy10.1016/j.electacta.2015.05.179 ↗
43. Tafel current at fractal electrodes: connection with admittance spectra10.1016/0022-0728(90)87113-X ↗
44. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
45. AC and DC study of the temperature effect on mild steel corrosion in acid media in the presence of benzimidazole derivatives10.1016/S0010-938X(02)00072-0 ↗
46. The inhibition of low carbon steel corrosion in hydrochloric acid solutions by succinic acid: part I. Weight loss, polarization, EIS, PZC, EDX and SEM studies10.1016/j.electacta.2006.10.019 ↗
47. Effect of the polarization technique on dezincification rates and the physical structure of dezincified zones10.5006/0010-9312-24.12.411 ↗
48. Revised pourbaix diagrams for iron at 25–300 °C10.1016/S0010-938X(96)00067-4 ↗
49. Revised pourbaix diagrams for zinc at 25–300 °C10.1016/S0010-938X(97)89246-3 ↗
50. Hydrometallurgical processing of carbon steel EAF dust10.1016/j.jhazmat.2005.11.067 ↗
51. Corrosion behavior of brass alloys in aqueous solutions of different pH10.5006/1.3283987 ↗
52. Surface chemistry studies of copper chemical mechanical planarization10.1149/1.1377595 ↗
53. Electrochemical reduction of nitrate in weakly alkaline solutions10.1023/A:1012755222981 ↗