Effect of self-passivation on the electrochemical and corrosion behaviour of alloy C-22 in NaCl solutions
Source abstract
Abstract
Abstract The corrosion rate of alloy C-22 in the NaCl solution at room temperature is determined by two methods: by the anodic current density in the potential range of alloy passivity and by the analysis of anodic and cathodic voltammograms measured in the vicinity of corrosion potential. The specific features of passive current determination are considered and the difference between the corrosion currents determined by two methods is explained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. K.A. Gruss, G.A. Cragnolino, D.S. Dunn, N. Sridhar, Repassivation potential for localized corrosion of Alloys 625 and C22 in simulated repository environments. Proc. of CORROSION 1998 Conf., Houston, Texas: NACE Int. (1998) Paper No. 149.
2. D.S. Dunn, Y.-M. Pan, G.A. Cragnolino, Effects of environmental factors on the aqueous corrosion of high-level radioactive waste containers – experimental results and models, Nuclear Regulatory Commission Contract NRC-02-97-009. Center for Nuclear Waste Regulatory Analyses, San Antonio, Texas, 1999.
3. Passive dissolution and localized corrosion of Alloy 22 high-level waste container weldments
4. D.S. Dunn, Y.-M. Pan, G.A. Cragnolino, Stress corrosion cracking, passive, and localized corrosion of Alloy 22 high-level radioactive waste containers. Proc. of CORROSION 2000 Conf., Houston, Texas: NACE Int. (2000) Paper No.00206.
5. B.A. Kehler, G.O. Ilevbare, J.R. Scully. Comparision of the crevice corrosion resistance of Alloy 625 and 22 in concentrated chloride solution from 60 to 95°C. Proc. of CORROSION 2000 Conf., Houston, Texas: NACE Int. (2000) Paper No. 00182.
6. L.L. Wong, D.V. Fix, J.C. Estill, R.D. McCright, R.B. Rebak. Characterization of the corrosion behaviour of alloy 22 after five years immersion in multi-ionic solutions, in: R.J. Finch, D.B. Bullen (Eds.), Scientific Basis for Nuclear Waste Management XXV, vol. 757, Mater. Res. Soc., Warrendale, PA, 2002, Paper No. II4.4.10.1557/PROC-757-II4.4 ↗
7. R.B. Rebak, J.C. Estill, Review of corrosion modes for alloy 22 regarding lifetime expectancy of nuclear waste containers, in: R.J. Finch, D.B. Bullen (Eds.), Scientific Basis for Nuclear Waste Management XXVI, vol. 757, Mater. Res. Soc., Warrendale, PA, 2002, Paper No. II4.1.10.1557/PROC-757-II4.1 ↗
8. D.S. Dunn, C.S. Brossia, Assessment of passive and localized corrosion processes for Alloy 22 as a high-level nuclear waste container material. Proc. of CORROSION 2002 Conf., Houston, Texas. NACE Int. (2002) Paper No. 548.
9. Effects of temperature and potential on the passive corrosion properties of Alloy C22 and C27610.1149/1.1554914 ↗
10. D.S. Dunn, L. Yang, Y.-M. Pan, G.A. Cragnolino, Localized corrosion susceptibility of Alloy 22. Proc. of CORROSION 2003 Conf., Houston, Texas: NACE Int. (2003) Paper No. 03697.
11. J.C. Estill, G.A. Hust, R.B. Rebak, Long term corrosion potential behaviour of Alloy 22 in Yucca mountain relevant environments. Proc. of CORROSION 2003 Conf., Houston, Texas: NACE Int. (2003) Paper No. 03688.
12. An electrochemical impedance study of Alloy 22 in NaCl brine at elevated temperature. I. Corrosion behaviour10.1016/j.jelechem.2004.06.031 ↗
13. An electrochemical impedance of Alloy-22 in NaCl brine at elevated temperature: II. Reaction mechanism analysis10.1016/j.jelechem.2004.05.032 ↗
14. Localized corrosion of Alloy 22 in sodium chloride solutions at elevated temperature10.5006/1.3280655 ↗
15. The kinetics of hydrogen evolution and oxygen reduction on Alloy 2210.1016/j.corsci.2004.05.005 ↗
16. An electrochemical impedance spectroscopic study of the passive state on Alloy-2210.1016/j.electacta.2005.02.103 ↗
17. A microelectrochemical investigation of Alloy C22 in chloride solutions below the critical pitting temperature10.1149/1.2401052 ↗
18. M.A. Rodríguez, R.B. Rebak, R.M. Carranza, Oxide film aging on alloy 22 in halide containing solutions, in: D. Dunn, C. Poinssot, B. Begg (Eds.), Scientific Basis for Nuclear Waste Management XXX, vol. 985, Mater. Res. Soc. Symp. Proc., Warrendale, PA, 2007, Paper No. 0985-NN08-09.10.1557/PROC-985-0985-NN08-09 ↗
19. Interpretation of logi–logt relationships for nickel passivation10.1149/1.2119634 ↗
20. Inpedance and transient study of aluminium barrier-type oxide films10.1007/BF00242197 ↗
21. Theory of oxidation of metals10.1088/0034-4885/12/1/308 ↗
22. Evidence for a logarithmic oxidation process for stainless steel in aqueous systems10.1149/1.2427363 ↗
23. The remarkable passivity of austenitic stainless steel in sulphuric acid solution and the effect of repetitive temperature cycling10.1016/j.corsci.2009.07.010 ↗
24. Corrosion behaviour of Alloy 22 and Ti Grade 7 in a nuclear waste repository environment10.5006/1.3287856 ↗
25. Corrosion behaviour of Alloy 22 in oxalic acid and sodium chloride solutions10.5006/1.3287860 ↗
26. R. Kelly, J.R. Scully, D.W. Shoesmith, R.G. Buchheit, Electrochemical techniques in corrosion science and engineering. Marcel Dekker, NY, Basel, 2003, p. 126.10.1201/9780203909133 ↗
27. Tafel slopes and corrosion rates obtained in the pre-Tafel region of polarisation curves10.1016/j.corsci.2005.04.012 ↗
28. V. Levich, Physicochemical hydrodynamics. Prentice Hall, 1962.
29. Corrosion study of a carbon steel in neutral chloride solutions by impedance techniques10.1149/1.2119798 ↗
30. Influence of pitting and iron oxide formation during corrosion of carbon steel in unbuffered NaCl solutions10.1016/j.corsci.2009.02.021 ↗
31. Electrochemical techniques for determining corrosion rate of rusted steel in seawater10.1016/j.corsci.2010.09.011 ↗
32. Influence of stainless steel surface treatment on the oxygen reduction reaction in seawater10.1016/S0010-938X(00)00113-X ↗
33. Cathodic reduction of oxygen on passivated Fe, Ni, Cr and stainless steel in borate solutions10.4028/www.scientific.net/MSF.111-112.63 ↗
34. Electrochemical noise from oxygen reduction on stainless steel surfaces10.1016/j.corsci.2008.10.009 ↗
35. Study of oxygen reduction on stainless steel surfaces and its contribution to acoustic emission recorded during corrosion processes10.1016/j.corsci.2006.03.006 ↗
36. The mechanism of oxygen reduction on iron in neutral solutions10.1149/1.2109021 ↗
37. The influence of the cathodic process on the interpretation of electrochemical noise signals arising from pitting corrosion of stainless steels10.1016/j.corsci.2009.12.021 ↗
38. Passivity – the key to our metal-based civilization10.1351/pac199971060951 ↗