Ultra-high corrosion resistance of Al-Mg-Si film on steel sheet formed by PVD Mg coating and heat treatment
Source abstract
Abstract
This study fabricated alloy films with excellent corrosion resistance by depositing an Mg film on Al-Si coated steel sheets and applying heat treatment. The fabricated Al-Mg-Si alloy film formed a corrosion product film composed of two layers, showing an excellent barrier effect against corrosion factors. The Mg in the film fabricated by heat treatment for 5 min was widely distributed in a dissolved state on the AI phase and was continuously involved in the corrosion product formation reaction. The corrosion resistance evaluation results were explained by analyzing the properties of the alloy film and the mechanism of forming corrosion products.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Growth of intermetallic layer in the aluminide mild steel during hot-dipping10.1016/j.surfcoat.2009.09.061 ↗
2. On the influence of silicon on the growth of the alloy layer during hot dip aluminizing10.1007/BF00553379 ↗
3. Microstructural evolution of intermetallic layer in hot-dipped aluminide mild steel with silicon addition10.1016/j.surfcoat.2011.04.061 ↗
4. The role of silicon alloying addition on the pitting corrosion resistance of an Al-12 wt% Si alloy10.1016/j.electacta.2014.05.034 ↗
5. Deformation induced degradation of hot-dip aluminized steel10.1016/j.msea.2017.10.094 ↗
6. Electronic structure and pitting behavior of 3003 aluminum alloy passivated under various conditions10.1016/j.electacta.2009.02.058 ↗
7. In-situ imaging of chloride ions at the metal/solution interface by scanning combination microelectrodes10.5006/1.3280521 ↗
8. Pitting corrosion of aluminum10.1016/S0010-938X(99)00012-8 ↗
9. Understanding magnesium corrosion—a framework for improved alloy performance10.1002/adem.200310405 ↗
10. Aluminium-magnesium alloys as corrosion resistant coatings for steel10.1016/0010-938X(96)00123-0 ↗
11. General relations regarding graph theory and the passivity of binary alloys10.1149/1.1566412 ↗
12. Revised phase diagram for the system Al2O3—SiO210.1111/j.1151-2916.1962.tb11133.x ↗
13. Bond dissociation energies
14. Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media10.1016/j.electacta.2008.06.001 ↗
15. Corrosion behaviour of AA6082 Al-Mg-Si alloy extrusion: the influence of quench cooling rate10.1016/j.corsci.2019.01.030 ↗
16. Influence of second phases on the electrochemical behavior of hot dipped Al–Mg–Si coated steel10.1016/j.corsci.2010.04.013 ↗
17. A summary of corrosion properties of Al-rich solid solution and secondary phase particles in Al alloys10.3390/met7030084 ↗
18. Thermodynamic evaluation of hypereutectic Al–Si (A390) alloy with addition of Mg10.1016/j.actamat.2010.02.017 ↗
19. Electrochemical characteristics of intermetallic phases in aluminum alloys10.1149/1.1869984 ↗
20. Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys10.1149/1.3523229 ↗
21. Morphology and crystal orientation on corrosion resistance of Mg thin films formed by PVD method onto Zn electroplated substrate10.1016/j.surfcoat.2008.06.149 ↗
22. Enhancement of corrosion resistance by lamination of Mg film on Zn-55Al-1.6 Si-coated steel by physical vapor deposition10.1016/j.surfcoat.2020.125537 ↗
23. Corrosion mechanism associated with Mg2Si and Si particles in Al–Mg–Si alloys10.1016/S1003-6326(11)61092-3 ↗
24. Effect of Zn and Mg alloying on microstructure and anticorrosion mechanisms of Al-Si based coatings for high strength steel10.1016/j.corsci.2018.10.037 ↗
25. The influence of MgSi particle reactivity and dissolution processes on corrosion in Al–Mg–Si alloys10.1016/j.electacta.2008.05.078 ↗
26. Effect of heat treatment on hydrogen-assisted fracture behavior of PH13-8Mo steel10.1016/j.corsci.2017.09.018 ↗
27. Electrochemical reactivity, surface composition and corrosion mechanisms of the complex metallic alloy Al3Mg210.1016/j.corsci.2009.10.015 ↗
28. Atomistic study of pipe diffusion in Al–Mg alloys10.1016/j.actamat.2003.09.002 ↗
29. Interdiffusion and phase growth kinetics in magnesium-aluminum binary system10.1007/s11669-013-0189-2 ↗
30. Effect of silicon content on microstructure and electrochemical behavior of hypoeutectic Al–Si alloys10.1016/j.matlet.2007.05.051 ↗
31. Quantitative prediction of surface segregation10.1016/0021-9517(79)90011-3 ↗
32. Oxidation studies of Al alloys: part II Al-Mg alloy10.1016/j.corsci.2019.04.018 ↗
33. Corrosion behavior of an artificially aged (T6) Al–Si–Mg-based metal matrix composite10.1177/0021998305057434 ↗
34. Plasma CVD grown Al2O3 and MgAl2O4 coatings for corrosion protection applications10.1016/j.surfcoat.2018.09.054 ↗
35. Chemistry of corrosion products on Zn–Al–Mg alloy coated steel10.1016/j.corsci.2010.05.044 ↗
36. Angle-resolved x-ray photoelectron spectroscopy of ultrathin Al 2 O 3 films grown by atomic layer deposition10.1116/1.1507330 ↗
37. Fabrication of Ag/TiO 2 nanoheterostructures with visible light photocatalytic function via a solvothermal approach10.1039/c2ce25161b ↗
38. Highly effective antibacterial activity and synergistic effect of Ag-MgO nanocomposite against Escherichia coli10.1016/j.jallcom.2016.05.179 ↗
39. Corrosion resistance of zinc–magnesium coated steel10.1016/j.corsci.2007.03.032 ↗
40. Effect of the pH in the growth of benzotriazole model layers at realistic environmental conditions10.1016/j.corsci.2018.08.008 ↗
41. The initial oxidation of Al–Mg alloys: Depth-resolved quantitative analysis by angle-resolved x-ray photoelectron spectroscopy and real-time in situ ellipsometry10.1063/1.3268480 ↗
42. Thermodynamics of ultra-thin oxide overgrowths on Al–Mg alloys: role of interface energy10.1016/j.corsci.2015.10.035 ↗
43. A first quantitative XPS study of the surface films formed, by exposure to water, on Mg and on the Mg–Al intermetallics: Al3Mg2 and Mg17Al1210.1016/j.corsci.2009.02.017 ↗
44. Open circuit potentials of metallic chromium and austenitic 304 stainless steel in aqueous sulphuric acid solution and the influence of chloride ions on them10.1016/j.corsci.2008.01.012 ↗
45. Relation between open circuit potential and polarization resistance with rust and corrosion monitoring of mild steel10.1007/s11665-016-2112-6 ↗
46. Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions; Part II: electrochemical analyses10.1016/j.corsci.2010.08.018 ↗
47. An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II.: EIS interpretation of corrosion behaviour10.1016/S0010-938X(02)00214-7 ↗
48. EIS study of a self-repairing microarc oxidation coating10.1016/j.corsci.2010.10.010 ↗
49. Correlation between morphology and electrochemical behavior of chromium-free conversion coatings for aluminum alloys corrosion protection10.1016/j.surfcoat.2018.07.068 ↗
50. Corrosion characterization of titanium alloys by electrochemical techniques10.1016/j.electacta.2005.02.121 ↗
51. Electrochemical impedance spectroscopy
52. Influence of alloyed magnesium on the microstructure and long-term corrosion behavior of hot-dip Al–Zn–Si coating in NaCl solution10.1016/j.corsci.2015.12.014 ↗
53. Corrosion behaviour of hot-dip Al–Zn–Si and Al–Zn–Si–3Mg coatings in NaCl solution10.1016/j.corsci.2017.03.013 ↗