journal article·2014-11

Round robin on creep fatigue crack growth testing for verification of ASTM standard 2760-10

A. Saxena, S. B. Narasimhachary

Materials at High Temperatures· Volume 31· Issue 4
Publisher page

Abstract

This paper presents early results from an ongoing round robin study to verify the newly developed ASTM standard E-2760-10 on creep fatigue crack growth testing. This round robin is an international effort with 18 participants from 11 countries from Asia, North America and Europe. All participants are testing compact type, C(T) specimens according to the procedure described in the standard. The test material is P91 taken from a section of retired steam pipe that was heat treated to rejuvenate the microstructure. All background materials data such as tensile, creep deformation and creep fatigue crack formation data are already available on the test material. Creep fatigue crack growth testing was conducted as part of a pilot program at 625°C using C(T) specimens under constant load amplitude conditions at two load levels. The tests are conducted at hold times of 0, 60 and 600 s. Creep fatigue crack growth rates are analysed using the two methods included as part of the test standard. The data from the various participants will be assessed to determine the expected levels of precision and bias in creep fatigue crack growth data obtained using the ASTM standard. Modifications to the current version of the standard will be proposed and balloted as needed from the round robin results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. ‘Standard method for creep-fatigue crack growth testing’, ASTM Standard E2760-10, ASTM, Bal Harbor, PA, USA, 2010.
2. 10.1016/j.ijfatigue.2013.07.00610.1016/j.ijfatigue.2013.07.006 ↗
3. V. Kalyanasundaram, A. Saxena, S. Narasimhachary, B. Dogan: ‘ASTM round-robin on creep�fatigue and creep behavior of P91 Steel', ASTM STP 1539, 2011, 23–40.10.1520/STP49933S ↗
4. V. Kalyanasundaram, A. Saxena, S. R. Holdsworth and B. Dogan: ‘Final report on round-robin conducted in support of standard test method for creep-fatigue testing’, EPRI Report 000000003002001719, EPRI, Palo Alto, CA, USA, 2012.
5. K. B. Yoon, A. Saxena and P. K. Liaw: ‘Characterization of creepfatigue crack growth behavior under trapezoidal waveshape using Ct-parameter’,Int. J. Fract., 1993,59, (2), 95�114.10.1007/BF00012385 ↗
6. A. Saxena: ‘Nonlinear fracture mechanics for engineers’; 1998, Boca Raton, FL, CRC Press.
7. K. B. Yoon, A. Saxena and D. L. McDowell: in ‘Fracture mechanics: twenty-second symposium’, (ed H. A. Enrstet al.), ASTM STP 1131, 367�392; 1992, West Conshohocken, PA, ATSM.
8. V. Kumar, M. D. German and C. F. Shih: ‘Engineering approach for elastic�plastic fracture analysis’, Report, EPRI, EPRI, Palo Alto, CA, USA, 1981.10.2172/6068291 ↗