Moisture-induced instability at the Al2O3/Ni3Al(110) interface: interfacial chemistry
Source abstract
Abstract
STM, XPS, AES and LEED have been used to characterize the growth of ~ 1 nm thick Al2O3 films on Ni3Al(110), and on Ni3Al(111), and their reactivity towards H2O pressures (PH2O) >10−6 Torr, 300 K. As-grown films on Ni3Al(110) exhibit a true oxide layer with an incommensurate interface involving both aluminum and oxygen atoms in intermediate oxidation states. Upon exposure to PH2O > 10−5 Torr, this oxide film undergoes severe reorganization and reconstruction, and the eventual loss of all long-range order. This effect is specific to H2O; similar exposures to O2 have no effect. STM measurements indicate that this effect is pressure- rather than exposure- dependent, indicating that oxide reconstruction is due to a cooperative surface reaction involving multiple H2O molecules at a single surface site. This effect is not correlated with surface hydroxylation, observed only for PH2O > 1 Torr, in common with other alumina surfaces. The H2O-induced instability is also observed for the Al2O3/Ni3Al(111) films of similar thickness and composition but at much longer exposure time at a given water vapor pressure. The results suggest that the incommensurate nature of the Al2O3/Ni3Al(110) interface is important in the moisture-induced spallation of alumina scales.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · High-Temperature Coating Behaviors · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. 10.1016/S0921-5093(01)01712-910.1016/S0921-5093(01)01712-9 ↗
2. 10.1016/0921-5093(95)09819-410.1016/0921-5093(95)09819-4 ↗
3. 10.1111/j.1151-2916.1998.tb02761.x10.1111/j.1151-2916.1998.tb02761.x ↗
4. 10.1007/s11661-003-0020-510.1007/s11661-003-0020-5 ↗
5. 10.1007/s11661-999-0128-310.1007/s11661-999-0128-3 ↗
6. Svensson, H., Angentete, J. and Stiller, K.Surf Coats Technol. 177-178, 152-157 (2004).10.1016/j.surfcoat.2003.09.002 ↗
7. 10.1016/S0039-6028(02)02214-810.1016/S0039-6028(02)02214-8 ↗
8. 10.1103/PhysRevLett.84.365010.1103/PhysRevLett.84.3650 ↗
9. Ruberto, C., Yourdshahyan, Y. and Lundqvist, B. I.Phys. Rev., B67, 195412 1-17 (2003).10.1103/PhysRevB.67.195412 ↗
10. 10.1126/science.282.5387.26510.1126/science.282.5387.265 ↗
11. 10.1016/S0039-6028(98)00661-X10.1016/S0039-6028(98)00661-X ↗
12. 10.1016/S0079-6816(99)00012-X10.1016/S0079-6816(99)00012-X ↗
13. 10.1021/la026208a10.1021/la026208a ↗
14. 10.1126/science.107340410.1126/science.1073404 ↗
15. 10.1016/S0169-4332(98)00669-210.1016/S0169-4332(98)00669-2 ↗
16. 10.1103/PhysRevLett.85.77610.1103/PhysRevLett.85.776 ↗
17. Baumer, M., Frank, M., Heemeier, M., Kuhnemuth, R., Stempel, S. and Freund, H.J.Surf Sci. 454-56, 957-962 (2000).10.1016/S0039-6028(00)00255-7 ↗
18. Seah, M. P.Practical Surface Analysis; Wiley: New York, 1990.
19. Davis, L. E., MacDonald, N. C., Palmberg, P. W., Raich, G. E. and Weber, R. E.Handbook of Auger Electron Spectroscopy; Physical Electronics Industries, Inc: Eden Prairie, MN, 1979.
20. 10.1142/S0218625X9600236910.1142/S0218625X96002369 ↗
21. 10.1103/PhysRevB.33.143610.1103/PhysRevB.33.1436 ↗
22. 10.1016/0167-577X(90)90114-210.1016/0167-577X(90)90114-2 ↗
23. 10.1016/0368-2048(90)85018-510.1016/0368-2048(90)85018-5 ↗
24. 10.1116/1.58122110.1116/1.581221 ↗
25. Somorjai, G. A.Introduction to Surface Chemistry and Catalysis,lstedn.; John Wiley & Sons, Inc: New York, 1994.
26. 10.1016/0301-0104(93)80031-410.1016/0301-0104(93)80031-4 ↗
27. 10.1103/PhysRevB.60.290010.1103/PhysRevB.60.2900 ↗
28. 10.1016/S0039-6028(97)00054-X10.1016/S0039-6028(97)00054-X ↗
29. 10.1116/1.58489410.1116/1.584894 ↗
30. Calow C. A. · J. Mater. Sci · 1971 · 6, 156
31. 10.1103/PhysRevB.69.04140510.1103/PhysRevB.69.041405 ↗